The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
action=create attribute (Sec. A.0)
Advanced File System
See AdvFS
AdvFS
choosing as file system type (Sec. 4.3)
defined (Sec. 4.3)
for more information about
mounting file system in UNIX shell (Sec. 3.5)
restoring file systems (Sec. 3.6.2)
restoring var and usr file systems (Sec. 3.6.2)
allocating
space for /usr file system (Sec. 4.10)
space for user created files (Sec. 4.10.2)
swap space (Sec. 4.12)
/var file system (Sec. 4.10.2)
Asian terminal drivers and daemons
for WLS installation (Sec. 2.6.1)
attribute-value pairs
cautions when modifying (Sec. A.0)
install.cdf file (Sec. A.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
boot command sequence
to start a full installation over the network (Sec. 1.4)
boot failure
over the network (Sec. 1.4.2)
over the network (Sec. 1.4.2)
booting
systems using FDDI (Sec. 1.4.1)
bootp protocol
over the network (Sec. 1.4)
burn CD-ROM image (Sec. 6.8.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
CD-ROM
burning an image onto (Sec. 6.8.4)
copying CDFs and user-supplied files to (Sec. 6.8.4)
providing user-supplied files and CDFs on (Sec. 6.8.3)
providing user-supplied files and CDFs on (Sec. 6.8.4)
WLS installation procedure (Sec. 2.4.1)
CDF
See also config.cdf file
See also install.cdf file
copying to /var/tmp directory (Sec. 6.8.3)
copying to CD-ROM (Sec. 6.8.4)
copying to diskette (Sec. 6.8.1)
copying to RIS server (Sec. 6.8.2)
dynamically modifying during cloning (Sec. 6.8.3)
moving to right location (Sec. 6.8)
naming convention (Sec. 6.5)
overview of (Sec. 6.2)
seach order (Sec. 6.2)
theory of operation (Sec. 6.6)
CDFMODE attribute (Sec. 8.7.2)
validation errors (Sec. 8.7.2)
checksum
config.cdf file (Sec. 8.6)
cloned installation (Sec. 7.0)
cloned system configuration (Sec. 8.0)
cluster
cloning restrictions (Sec. 8.4)
disk space planning (Sec. 4.2)
file system type (Sec. 4.3)
command
installupdate (Sec. 1.3)
sysman -clone -save (Sec. 8.5)
componentid group (Sec. 8.3.1)
config.cdf file (Sec. 8.0)
See also configuration cloning
acceptable locations for (Sec. 8.2)
applying to system (Sec. 8.11)
CDFMODE attribute (Sec. 8.7.2)
checksum (Sec. 8.6)
componentid group (Sec. 8.3.1)
copying to right location (Sec. 8.10)
creating (Sec. 8.6)
format and contents (Sec. 8.3)
host and site specific attributes (Sec. 8.7)
modifying (Sec. 8.7)
sample of (Sec. 8.3.1)
validation errors (Sec. 8.8)
configuration CDF
See config.cdf file
configuration cloning (Sec. 8.0)
See also config.cdf file
administrator tasks (Sec. 6.5)
applying CDF to target system (Sec. 8.11)
applying config.cdf to running system (Sec. 8.11.2)
checksum in config.cdf file (Sec. 8.6)
combining with installation cloning (Sec. 8.1)
copying config.cdf to right location (Sec. 8.10)
copying files to /var/tmp directory (Sec. 6.8.3)
copying files to CD-ROM (Sec. 6.8.4)
copying files to diskette (Sec. 6.8.1)
copying files to RIS server (Sec. 6.8.2)
creating postload file (Sec. 6.7.2)
creating postreboot file (Sec. 6.7.3)
defined (Sec. 8.1)
locations of config.cdf file (Sec. 8.2)
maintaining unique identity on network (Sec. 8.7)
model system (Sec. 8.1)
modifying CDF (Sec. 8.7)
modifying host and site specific attributes (Sec. 8.7)
process (Sec. 8.2)
records with multiple IDs (Sec. 8.7.2)
restrictions (Sec. 8.4)
saving data into CDF (Sec. 8.6)
summary of procedures (Sec. 8.5)
target system (Sec. 8.1)
target system not connected to network (Sec. 8.10.2)
theory of operation (Sec. 6.6)
validating (Sec. 8.8)
validation errors (Sec. 8.7.2)
validation errors (Sec. 8.8)
configuration description file
See CDF
country
supported for WLS installation (Sec. 2.5)
crash dumps (Sec. 4.12)
planning disk space (Sec. 4.11.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
dataless management services
See DMS
default partition table
modifying (Sec. 3.8)
directory
/isl (Sec. 6.8.4)
profile set (Sec. 6.8.2)
/usr file system (Sec. 4.10)
/var/adm (Sec. 4.11.3)
/var/adm/ris (Sec. 4.5)
/var/tmp (Sec. 6.8.3)
disk
allocating space for user files (Sec. 4.10.2)
changing disk partition size (Sec. 3.8)
for /usr file system (Sec. 4.10)
disk configuration application (Sec. 4.7)
disk partition
customizing sizes (Sec. 4.6)
size of existing (Sec. 4.7)
disk space
file system overhead (Sec. 4.8.1)
for /usr file system (Sec. 4.10)
for clusters (Sec. 4.2)
for DMS server (Sec. 4.5.2)
for layered products (Sec. 4.5)
for RIS and DMS servers (Sec. 4.5)
for symbolically linked RIS areas (Sec. 4.5)
for user created files (Sec. 4.10.2)
for WLS (Sec. 4.5)
for WLS software (Sec. 2.2)
insufficient for WLS installation (Sec. 2.5)
manually planning (Sec. 4.5)
planning (Sec. 3.9.2)
planning features of full installation (Sec. 4.4)
software requirements (Sec. 4.8)
disk space planning
considerations for (Sec. 4.6)
for crash dumps (Sec. 4.11.1)
for layered products (Sec. 4.5)
for log files (Sec. 4.11.2)
for RIS servers (Sec. 4.5)
for system accounting files (Sec. 4.11.3)
for WLS (Sec. 4.5)
diskette
copying CDFs and user-supplied files to (Sec. 6.8.1)
disklabel command
determining partition size (Sec. 4.7)
restoring AdvFS file system (Sec. 3.6.2)
restoring UFS file system (Sec. 3.6.1)
using in UNIX shell (Sec. 3.6.1)
using to change disk partition size (Sec. 3.8)
distribution media
copying config.cdf file to (Sec. 8.10.3)
format (Sec. 6.7)
DMS
disk space requirements (Sec. 4.5)
disk space requirements (Sec. 4.5.2)
dumps
full or partial (Sec. 4.12)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
EISA bus
booting systems with FDDI (Sec. 1.4.1)
error
during installation cloning (Sec. 7.6.4)
error logger file
disk space requirements for (Sec. 4.11.2)
exiting
the UNIX shell (Sec. 3.9)
Extended Memory Interface
See XMI bus
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
FDDI
boot instructions (Sec. 1.4.1)
network interface (Sec. 1.4.1)
Fiber Distributed Data Interface
See FDDI
file
created by users (Sec. 4.10.2)
creating postload file (Sec. 6.7.2)
creating postreboot file (Sec. 6.7.3)
creating preinstall file (Sec. 6.7.1)
samples of user-supplied scripts (Sec. A.7)
to customize installation process (Sec. 6.0)
/var/adm/smlogs/it.log (Sec. 2.5.4)
vmunix (Sec. 4.11.1)
file system
contents of (Sec. 4.6)
contents of /var (Sec. 4.10.2)
disk space required for /usr (Sec. 4.10)
for user created files (Sec. 4.10.2)
mounting in UNIX shell (Sec. 3.5)
overhead (Sec. 4.8.1)
restoring in UNIX shell (Sec. 3.6)
file system corruption
recovering from (Sec. 3.1)
file system layout
customizing (Sec. 4.6)
default (Sec. 4.4)
file system type
AdvFS (Sec. 4.3)
default (Sec. 4.4)
defined (Sec. 4.2)
UFS (Sec. 4.3.1)
files
backup for WLS installation (Sec. 2.7)
font size
differences in CDF and cloned system (Sec. 7.5.3)
ftp
coping config.cdf file using (Sec. 8.10.2)
full dumps
space for (Sec. 4.12)
full installation
applying config.cdf file to target system (Sec. 8.11.1)
automatic disk planning features (Sec. 4.4)
booting over the network (Sec. 1.3)
choosing file system type during (Sec. 4.2)
creating postload file (Sec. 6.7.2)
creating postreboot file (Sec. 6.7.3)
creating preinstall file (Sec. 6.7.1)
guidelines for user-supplied files (Sec. 6.7)
invoking configuration cloning (Sec. 8.1)
invoking disk configuration application (Sec. 4.7)
invoking disklabel command (Sec. 4.7)
invoking installation cloning (Sec. 7.1)
invoking UNIX shell (Sec. 3.1)
locations of config.cdf file (Sec. 8.2)
locations of install.cdf file (Sec. 7.2)
locations of user-supplied files and CDFs (Sec. 6.8)
modifying disk partitions (Sec. 4.7)
network boot commands (Sec. 1.4)
planning space for /usr file system (Sec. 4.10)
relationship between CDF and user-supplied files (Sec. 6.4)
restarting from the UNIX shell (Sec. 3.9)
search order of CDFs (Sec. 6.2)
size of software (Sec. 4.8)
start installation cloning on target system (Sec. 7.9)
user-supplied file names (Sec. 6.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
graphics adapters
differences between CDF and cloned system (Sec. 7.5.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
hardware product kit
definition (Sec. 5.1)
installing (Sec. 5.0)
installing during Full Installation (Sec. 5.3)
installing on running system (Sec. 5.2)
updating (Sec. 5.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
i18n
defined (Sec. 2.1)
i18n directory
creating (Sec. 2.5)
i18n installation
See WLS
init command (Sec. 1.4.2)
install.cdf file (Sec. 7.0)
See also installation cloning
acceptable differences in cloned systems (Sec. 7.5.1)
acceptable locations for (Sec. 7.2)
action=create attribute (Sec. A.0)
area and location attributes (Sec. 7.6.3)
attribute-value pair definitions (Sec. 8.11.3)
attribute-value pairs (Sec. 7.3.1)
blank spaces in file (Sec. 7.6.4)
caution when editing (Sec. A.0)
copying to the right location (Sec. 7.8)
creating (Sec. 7.5)
date and time attributes (Sec. 7.6.3)
description (Sec. 7.3.1)
format and contents (Sec. 7.3)
generating from a model system (Sec. 7.5)
host- and site-specific attributes (Sec. 7.6.3)
Inst_cinstall item (Sec. A.7)
Inst_disklabel item (Sec. A.3)
Inst_filesystem item (Sec. A.2)
Inst_global item (Sec. A.4)
Inst_subsets item (Sec. A.6)
Ins_islinfo item (Sec. A.1)
modifying (Sec. 7.6)
modifying (Sec. 7.6)
null values (Sec. A.0)
password attribute (Sec. 7.6.3)
sample (Sec. 7.3.2)
setting type of kernel build (Sec. 7.6.2)
validation errors (Sec. 7.6)
installation
worldwide language support (Sec. 2.0)
installation CDF
items and attributes in (Sec. 7.3.1)
installation cloning (Sec. 7.0)
See also install.cdf file
administrator tasks (Sec. 6.5)
attribute-value pair definitions (Sec. 8.11.3)
cautions when modifying CDF (Sec. A.0)
copying files to /var/tmp directory (Sec. 6.8.3)
copying files to CD-ROM (Sec. 6.8.4)
copying files to diskette (Sec. 6.8.1)
copying files to RIS server (Sec. 6.8.2)
copying install.cdf file to the right location (Sec. 7.8)
creating postload file (Sec. 6.7.2)
creating postreboot file (Sec. 6.7.3)
creating preinstall file (Sec. 6.7.1)
defined (Sec. 7.1)
differences in disk configuration (Sec. 7.5.1)
differences in fonts sizes (Sec. 7.5.3)
differences in graphics adapters (Sec. 7.5.2)
differences in keyboard types (Sec. 7.5.4)
eliminating user intervention (Sec. 7.6)
failure at startup (Sec. 7.9)
from CD-ROM (Sec. 7.6.3)
generating CDF from model system (Sec. 7.5)
hardware restrictions (Sec. 7.1)
host- and site-specific attributes (Sec. 7.6.3)
invalid attribute value error (Sec. 7.6.4)
invoking user-supplied files (Sec. 7.7)
locations of install.cdf file (Sec. 7.2)
model system (Sec. 7.1)
modifying install.cdf file (Sec. 7.6)
procedures (Sec. 7.4)
selecting right CDF (Sec. 7.5)
setting confirmation attribute (Sec. 7.6.1)
starting (Sec. 7.9)
target system (Sec. 7.1)
theory of operation (Sec. 6.6)
unattended (Sec. 7.6)
unattended kernel build (Sec. 7.6.2)
validation errors (Sec. 7.6)
installing hardware product kits (Sec. 5.0)
installupdate command
starting from network server (Sec. 1.3)
Inst_cinstall item (Sec. A.7)
Inst_disklabel item (Sec. A.3)
Inst_filesystem item (Sec. A.2)
Inst_global item (Sec. A.4)
Inst_islinfo item (Sec. A.1)
Inst_subsets item (Sec. A.6)
invalid attribute value error (Sec. 7.6.4)
ISA bus
rebooting system with graphics devices (Sec. 1.4.3)
/isl directory (Sec. 6.8.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel
Asian terminal drivers and daemons (Sec. 2.6.1)
kernel build on target system (Sec. 7.6.2)
vmunix (Sec. 4.11.1)
kernel build
Asian kernel (Sec. 2.6)
failure after WLS installation (Sec. 2.5.4)
setting attribute in install.cdf file (Sec. 7.6.2)
WLS installation (Sec. 2.5.4)
kernel option
in install.cdf file (Sec. 7.6.2)
keyboard types
differences in CDF and cloned system (Sec. 7.5.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
language
setting for desktop (Sec. 2.8)
supported for WLS installation (Sec. 2.5)
language option
on login screen (Sec. 2.5.4)
languages
installing (Sec. 2.0)
layered product
disk space requirements (Sec. 4.5)
log file
syslog (Sec. 4.11.2)
logging system activity (Sec. 4.11.2)
login screen
setting language option (Sec. 2.5.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
memory
determining amount of (Sec. 4.11.1)
model system
configuration cloning (Sec. 8.1)
installation cloning (Sec. 7.1)
installation cloning (Sec. 7.5)
mount
file systems from the UNIX shell (Sec. 3.5)
mounting
user file system under /usr (Sec. 4.10.2)
MULE
for WLS installation (Sec. 2.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
NEMACS
for WLS installation (Sec. 2.5)
network
boot devices (Sec. 1.4)
boot failure (Sec. 1.4.2)
boot failure (Sec. 1.4.2)
checking connection (Sec. 1.2)
configuration cloning (Sec. 8.10.2)
invoking WLS installation (Sec. 2.4.2)
reboot systems with graphics devices on ISA bus (Sec. 1.4.3)
starting a full installation (Sec. 1.3)
network adapter
determining (Sec. 1.4)
determining (Sec. 1.4.1)
network connections
verifying (Sec. 1.2)
network installations (Sec. 1.1)
network server
starting a full installation from (Sec. 1.3)
starting update installation from (Sec. 1.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
outline fonts
for WLS installation (Sec. 2.5)
overhead
for disk partitions (Sec. 4.8.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
partial dumps
space for (Sec. 4.12)
partition
default for swap space (Sec. 4.12)
for /usr file system (Sec. 4.10)
for crash dump (Sec. 4.12)
PCI bus
booting systems with FDDI (Sec. 1.4.1)
Peripheral Component Interconnect
PCI (Sec. 1.4.1)
ping command (Sec. 1.2)
ping command (Sec. 1.2)
postload file
creating (Sec. 6.7.2)
moving to right location (Sec. 6.8)
sample script (Sec. A.7)
postreboot file
creating (Sec. 6.7.3)
moving to right location (Sec. 6.8)
sample script (Sec. A.7)
preinstall file
creating (Sec. 6.7.1)
moving to right location (Sec. 6.8)
sample script (Sec. A.7)
printers
supported for WLS (Sec. 2.1)
profile set directory (Sec. 6.8.2)
public domain source files
for WLS installation (Sec. 2.5)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
random access memory
determining amount of (Sec. 4.11.1)
reboot
systems with graphics devices on ISA bus (Sec. 1.4.3)
restart command (Sec. 3.9)
nogui option (Sec. 3.9)
restore
AdvFS file systems (Sec. 3.6.2)
AdvFS var area (Sec. 3.6.2)
damaged root file system (Sec. 3.6)
file systems in UNIX shell (Sec. 3.6)
UFS file systems (Sec. 3.6.1)
var area (Sec. 3.6)
restore configuration
using config.cdf file (Sec. 8.0)
RIS
disk space required (Sec. 4.5)
space requirements for (Sec. 4.5)
RIS server
copying CDFs and user-supplied files to (Sec. 6.8.2)
installing from
invoking WLS installation (Sec. 2.4.2)
profile set directory (Sec. 6.8.2)
starting a full installation from (Sec. 1.3)
starting update installation from (Sec. 1.3)
root file system
recovering corrupted (Sec. 3.1)
restoring in UNIX shell (Sec. 3.6.1)
restoring AdvFS (Sec. 3.6.2)
restoring damaged (Sec. 3.6)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
script
samples of user-supplied scripts (Sec. A.7)
setld command
WLS installation (Sec. 2.4.2)
size
of /usr file system (Sec. 4.10)
of crash dump partition (Sec. 4.12)
of var area (Sec. 4.10.2)
software subset
configuring for WLS installation (Sec. 2.5.3)
defined (Sec. 4.10)
disk space required for (Sec. 4.8)
loading for WLS installation (Sec. 2.5.2)
space required for /usr file system (Sec. 4.10)
software subsets
selecting for WLS installation (Sec. 2.5.1)
superuser
how to become (Sec. 1.3)
swap space
creating in UNIX shell (Sec. 3.4)
minimum size of (Sec. 4.12)
planning (Sec. 4.12)
symbolically linked RIS area (Sec. 4.5)
syslog file
disk space requirements for (Sec. 4.11.2)
sysman command
to clone configurations (Sec. 8.5)
system accounting
space for (Sec. 4.11.3)
system activity
logging (Sec. 4.11.2)
system configuration
restoring with config.cdf file (Sec. 8.0)
system crash (Sec. 4.12)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
target system
configuration cloning (Sec. 8.1)
installation cloning (Sec. 7.1)
TERM environment variable (Sec. 3.3)
terminal codeset
for WLS installation (Sec. 2.6.1)
terminals
supported for WLS (Sec. 2.1)
text editor
setting in UNIX shell (Sec. 3.3)
vi (Sec. 3.3)
turbochannel bus
booting systems with FDDI (Sec. 1.4.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
UFS
choosing as file system type (Sec. 4.3.1)
defined (Sec. 4.3.1)
mounting file system in UNIX shell (Sec. 3.5)
restoring file systems (Sec. 3.6.1)
UNIX File System
See UFS
UNIX shell
changing disk partitions (Sec. 3.8)
creating swap space (Sec. 3.4)
defined (Sec. 3.1)
exiting (Sec. 3.9)
invoking (Sec. 3.1)
invoking (Sec. 3.2)
memory file systems (Sec. 3.3)
mounting file systems (Sec. 3.5)
restarting the full installation (Sec. 3.9)
restoring AdvFS file system (Sec. 3.6.2)
restoring file systems (Sec. 3.6)
restoring UFS file systems (Sec. 3.6.1)
sample of tasks (Sec. 3.3)
setting text editor (Sec. 3.3)
unknown host message (Sec. 1.2)
update installation
invoking from RIS server (Sec. 1.3)
invoking over network (Sec. 1.3)
relationship between CDF and user-supplied files (Sec. 6.4)
sample update_postload script (Sec. A.7)
sample update_preinstall script (Sec. A.7)
user-supplied file names (Sec. 6.3)
update_postload file
sample script (Sec. A.7)
update_preinstall file
sample script (Sec. A.7)
updating
hardware product kits (Sec. 5.0)
user account
disk space for (Sec. 4.10.2)
user-supplied files
administrator tasks (Sec. 6.5)
contents and restrictions (Sec. 6.7)
copying to /var/tmp directory (Sec. 6.8.3)
copying to CD-ROM (Sec. 6.8.4)
copying to diskette (Sec. 6.8.1)
copying to RIS server (Sec. 6.8.2)
creating postload file (Sec. 6.7.2)
creating postreboot file (Sec. 6.7.3)
creating preinstall file (Sec. 6.7.1)
moving to right location (Sec. 6.8)
overview (Sec. 6.3)
relationship with CDF (Sec. 6.4)
sample scripts (Sec. A.7)
theory of operation (Sec. 6.6)
typical uses of (Sec. 6.3)
using during installation cloning (Sec. 7.7)
/usr file system
contents (Sec. 4.10)
defined (Sec. 4.10)
restoring (Sec. 3.6)
restoring AdvFS (Sec. 3.6.2)
UTX devices
for WLS installation (Sec. 2.6.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
validate config.cdf file (Sec. 8.8)
validation errors
config.cdf file (Sec. 8.7.2)
/var/tmp directory
copying CDFs and user-supplied files to (Sec. 6.8.3)
var area
planning space for (Sec. 4.10.2)
restoring (Sec. 3.6)
restoring AdvFS (Sec. 3.6.2)
/var file system
crash dump space (Sec. 4.11.1)
/var/adm directory
system accounting (Sec. 4.11.3)
/var/adm/ris directory (Sec. 4.5)
vi text editor (Sec. 3.3)
vmunix
size of (Sec. 4.11.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
W
WLS installation
Asian terminal drivers and daemons (Sec. 2.6.1)
backup files (Sec. 2.7)
configuring software subsets (Sec. 2.5.3)
countries supported (Sec. 2.5)
creating i18n directory (Sec. 2.5)
creating more disk space (Sec. 2.2)
from RIS server (Sec. 2.4.2)
insufficient disk space (Sec. 2.5)
kernel build (Sec. 2.5.4)
kernel build failure (Sec. 2.5.4)
kernel build log file (Sec. 2.5.4)
language option on login screen (Sec. 2.5.4)
loading software subsets (Sec. 2.5.2)
MULE (Sec. 2.5)
NEMACS (Sec. 2.5)
outline fonts (Sec. 2.5)
performing from CD-ROM (Sec. 2.4.1)
preparing system for (Sec. 2.2)
public domain source files (Sec. 2.5)
selecting software subsets (Sec. 2.5.1)
starting (Sec. 2.4)
starting from RIS server (Sec. 2.4.2)
supported terminals and printers (Sec. 2.1)
terminal codeset (Sec. 2.6.1)
using setld command (Sec. 2.4.2)
UTX devices (Sec. 2.6.1)
Wnn (Sec. 2.5)
wwconfig command (Sec. 2.6.1)
Wnn
for WLS installation (Sec. 2.5)
worldwide installation
See WLS
wwconfig command (Sec. 2.6.1)
wwinstall script
invoking from CD-ROM (Sec. 2.4.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
X
X server
restarting after WLS installation (Sec. 2.5.4)
XMI (Sec. 1.4.1)
XMI bus
booting if using FDDI (Sec. 1.4.1)