DSNlink DSNLINKC022 DSNlink for OpenVMS V2.2C ECO Summary
TITLE: DSNlink DSNLINKC022 DSNlink for OpenVMS V2.2C ECO Summary
Modification Date: 20-APR-1999
Modification Type: New Kit
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
PRODUCT: DSNlink for OpenVMS
OP/SYS: OpenVMS VAX
OpenVMS Alpha
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: DSNLINKC022
ECO Kits Superseded by This ECO Kit: none
ECO Kit Approximate Size: 18,954 Blocks
Saveset A - 18,954 Blocks
Kit Applies To: DSNlink for OpenVMS V2.2
OpenVMS VAX V6.2, V6.2-0HF, V7.0, and V7.1
OpenVMS Alpha V6.2, V6.2-1H1, V6.2-1H2,
V6.2-1H3, V7.0, V7.1, V7.1-1H1,
V7.1-1H2, V7.2, and V7.2-1H1
System/Cluster Reboot Necessary: No
Installation Rating: INSTALL_UNKNOWN
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for DSNlink for OpenVMS V2.2 on OpenVMS VAX V6.2
through V7.1 and OpenVMS Alpha V6.2 through V7.2-1H1. The DSNlink
Release Notes contain a complete explanation of this release. Below
is a brief description of problems addressed in this kit:
o These Remote Login problems have been fixed:
- A remote login session could be terminated if a specialist
entered a commands that produce large, single-record output,
such as the command SHOW CLUSTER/CONTINUOUS.
- All reported causes of disconnecting have been resolved.
o Numerous conditions that could lead to a JACKETMSGCORRUPT error
while running the ITS application have been resolved.
o These File Copy application problems have been fixed:
- If a file transferred from the host to a customer's system had
(RWED,RWED,RE,) protection, the file rename operation failed.
- The Monitoring and Performance History (MPH) analysis tool did
not submit files for processing on the host.
- The Analysis Tool option did not work unless you supplied a
service request number.
- File Copy ignored the local authorizations file and allowed all
DSNlink users to use File Copy.
o These modem transport problems have been fixed:
- Modem dialing errors were occurring when some of the modem
scripts went into a loop between the script's last two sections.
- Customer initiated connections were failing due to some
incorrect script settings.
- Conditions have been fixed that lead to SYSTEM-F-ABORT messages.
- The DTE speed specified during the DSNlink installation was
ignored.
- Modem connections failed when DSNlink could not lock the modem's
virtual line database (VLDB) to send DSNlink mail using OpenVMS
mail. This occurred when the sending account did not have the
SYSLCK privilege.
- The DSN TEST WIRE command generated a device error message,
which prevented the test from working.
- Modem speeds over 19200 were unstable when using a modem
connection to a serial port on a system running OpenVMS
Version 7.0.
- Modem daemons could hang in an online state if an incoming
modem connection was dropped before a link was started and
the hangup signal was not detected.
- The modem daemon stopped with a CMA-F-IN_USE error due to an
abnormal DTE line termination.
- DSNlink applications failed if you used the T trace flag on
the DSNMODEMAPI_TRACE logical name.
- Line daemon could fail with SYSTEM-F-EXQUOTA error without
giving enough information to identify the exhausted quota.
More information is now provided.
- Numerous conditions have been resolved that could lead to line
daemon crashes.
o DSNlink could not start applications if there was a missing closing
quotation mark in the final entry the configuration file, remote
authorizations file, or local authorizations file.
o These are fixes to the Service Request Application:
- You could not change Customer Support Centers using the
/SUPPORTCENTER qualifier.
- If you attempted to fetch a list of closed service requests
from a host that does not provide such lists, an error message
window appeared and the process hung.
- In the local authorizations file, entries that allow access to
the Service Request application, dsn_sra, incorrectly produced
"You are not authorized to use this application" messages.
- In the DECwindows Motif interface, when errors occurred
connecting to the host followed by the user clicking
anywhere in the window, the application stopped and
generated random application termination errors.
- Time zone differences could cause clocks on the host system
and your system to appear to be as much as 23 hours different.
INSTALLATION NOTES:
Before beginning the installation, customers should rename any modem
scripts they want to continue using. The DSNlink installation
procedure overwrites current modem scripts with new scripts if the
script names are identical. For more information, see the DSNlink
Version 2.2C Release Notes.
The DSNlink Version 2.2C for OpenVMS kit is installed with the
following commands:
$ SET DEFAULT SYS$UPDATE
$ @VMSINSTAL DSNLINKC022 ddcu:[dir]
Where ddcu:[dir] is the location of the DSNlink kit.
The installation procedure checks for the following:
o DSNlink Version 2.2
o Sufficient disk space
The save set, which contains files for both Alpha and VAX
systems, is approximately 19,000 blocks.
o The account from which DSNlink is installed has SETPRV or at
least the following privileges:
CMKRNL
DETACH
NETMBX
SYSPRV
SYSNAM
SYSLCK
TMPMBX
WORLD
o Running DSNlink modem processes.
o A running Queue Manager.
o The queue SYS$BATCH
DSNlink is not stopped by the installation.
A system reboot is not necessary.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
dsnlinkc022.README
.CHKSUM
dsnlinkc022.a-dcx_axpexe
dsnlinkc022.a-dcx_vaxexe
dsnlinkc022.CVRLET_TXT
|