DCE-W95 DCEW9520E05 DIGITAL DCE for Windows 95 Runtime Services ECO Summary
TITLE: DCE-W95 DCEW9520E05 DIGITAL DCE for Windows 95 Runtime Services ECO Summary
Modification Date: 07-AUG-1998
Modification Type: Updated ECO Kit - Supersedes DCEWIN9520E01
PRODUCT: DIGITAL DCE for Windows 95 Runtime Services
OP/SYS: Windows 95
COMPONENTs: acl_server.readme
libdce.DBG
dts_acts_provider.DBG
dced.DBG
dcecp.DBG
dcesetup.DBG
dcestart.DBG
migrate_win32.DBG
dcecm.DBG
dts_acts_provider.exe
dtsdate.exe
dced.exe
dcecp.exe
dcesetup.exe
dcestart.exe
dce_deinstall.exe
clean_11x.dll
migrate_win32.dll
setloc1.dll
gencat.exe
mkcatdef.exe
dcecm.dll
DCEUninstall.dll
win32_kill.exe
win32_ps.exe
strt2dce.tcl
files.tcl
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: DCEW9520E05
ECO Kits Superseded by This ECO Kit: DCEWIN9520E01
ECO Kit Approximate Size: 25738 Blocks
Zip File - 25726 Blocks
Kit Applies To: DIGITAL DCE for Windows 95 V2.0
Windows 95 V1.0 through Windows 95 w/Service Pak 1
and OSR/2
System/Cluster Reboot Necessary: No (See Installation Notes)
ECO KIT SUMMARY:
An ECO kit exists for DIGITAL DCE Runtime Services V2.0 on Windows 95 V1.0.
This kit addresses the following problems:
Problems Addressed in DCEW9520E05:
o DHCP is now supported for DCE clients.
o Previously, R1.0.3-based VMS servers occasionally logged Wrong Principal
errors when DCE for Windows 95 V2.0 clients were configured into the cell.
These errors appeared as "(RPC_CN_AUTH_VFY_CLIENT_REQ) on server failed
status = 14129090" in the server dce$secd.out log file. This problem
has been fixed.
o The dts_acts_provider.exe has been updated to include support for the
year 2000.
ECOs 2, 3, and 4 were never issued. This ECO includes the fix that was also
included in ECO 1.
Problems Addressed in DCEWIN9520E01:
o DCE Auto-Start will occur at boot time as opposed to being invoked
from the Startup folder. The side effect of this fix is that you
will no longer see the 'dcestart' MS-DOS window popup after login.
Also, between user logoff and logins, DCE daemons stay up and DCE
Auto-Start is not invoked.
INSTALLATION NOTES:
Install this ECO by running setup.exe from the ECO kit. The
installation procedure will detect which DCE products are
installed (Runtime and/or ADK) and update the product(s) as
appropriate for this ECO. If, after the installation of the ECO,
the DCE installation is modified by adding other DCE products,
the ECO must be reapplied.
It is recommended that you stop and exit DCE and all associated
DCE programs prior to installation. If this is not possible, you
must at least exit and restart the following programs in order for
the ECO changes to take effect after the installation:
1. DCESETUP
2. DCECP
In addition, if Integrated Login had been configured and you wish
to log off and log in under the same or a different user name, you
must reboot the system first in order for Integrated Login to work
properly.
Disk space required for the ECO kit:
13 MB
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
dcew9520e05.README
dcew9520e05.CHKSUM
dcew9520e05.CVRLET_TXT
dcew9520e05.zip
|