OpenVMS VAXVERI01_060 VAX V6.0 VERIFY ECO Summary
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Digital Equipment Corporation 1994, 1997. All rights reserved.
PRODUCT: OpenVMS VAX
COMPONENTS: VERIFY - VERIFY.EXE
FILMNTMSG - FILMNTMSG.EXE
SOURCE: Digital Equipment Corporation
ECO INFORMATION:
ECO Kit Name: VAXVERI01_060
ECO Kits Superseded by This ECO Kit: VAXVERI01_071 (V6.0 Only)
VAXVERI01_062 (V6.0 Only)
VAXVERI02_061 (V6.0 Only)
VAXVERI01_061 (V6.0 Only)
ECO Kit Approximate Size: 270 Blocks
Kit Applies To: OpenVMS VAX V6.0
System/Cluster Reboot Necessary: No
Installation Rating: 2 - To be installed on all systems running
the listed version(s) of OpenVMS and
using the following feature(s):
VERIFY Utility
NOTE: In order to receive the full fixes listed in this kit,
the following remedial kit or any kits that supersede it,
also needs to be installed:
VAXCLIU03_060
ECO KIT SUMMARY:
An ECO kit exists for VERIFY on OpenVMS VAX V6.0. This kit addresses the
following problems.
Problems Addressed in the VAXVERI01_060 Kit:
o The VAXVERI01_071 remedial kit, which addressed versions 5.5-2
through V7.1 has been superseded for V7.1. The other versions are
being released as single version kits.
There are no new problem solutions in this kit. If you have
installed the VAXVERI01_071 remedial kit you do not need to install
this kit.
Problems Addressed in the VAXVERI01_062 Kit for OpenVMS VAX V6.0:
o Errors similar to these may occur during execution of the
'ANALYZE/DISK' DCL command:
%ANALDISK-W-CHKALTHOME, invalid alternate home block, VBN 3,
RVN 1
%ANALDISK-W-CHKALTHOME, invalid alternate home block, VBN 4,
RVN 1
%ANALDISK-W-CHKALTHOME, invalid alternate home block, VBN 5,
RVN 1
NOTE: In order to receive this full fix, in addition to this kit,
the VAXCLIU03_060 kit or any kits that supersede it, must
also be installed.
This problem is fixed in OpenVMS VAX V7.0.
Problems Addressed in the VAXVERI02_061 Kit for OpenVMS VAX V6.0:
o When running ANAL/DISK/REPAIR, a directory that is reported as
having bad backlinks may be completely erased if it contains
an alias pointing to itself.
This problem is fixed in OpenVMS VAX V6.2.
o When running ANAL/DISK, an error may be returned from LIB (for
example, "-LIB-F-BADBLOSIZ, bad block size") and a user-mode
crash may occur.
This problem is fixed in OpenVMS VAX V6.2.
o ANAL/DISK does not notice out of order file names or versions
within a directory block.
This problem is fixed in OpenVMS VAX V6.2.
Problems Addressed in the VAXVERI01_061 Kit for OpenVMS VAX V6.0:
o When ANAL/DISK/REPAIR is run on a volume containing corrupt
directory files, the system crashes with an UNXSIGNAL bugcheck.
NOTE: VERIFY has been changed so all errors detected by the XQP
are also detected by ANAL/DISK and fixed if ANAL/DISK/REPAIR
is used. Bad RVNs (relative volume numbers) in directory
files are now removed properly and ANAL/DISK/REPAIR will not
bugcheck when fixing a broken directory.
This problem is fixed in OpenVMS VAX V6.2.
INSTALLATION NOTES:
The system does not need to be rebooted after this kit is installed.
However, if you have other nodes in your OpenVMS VMScluster, they should
be rebooted or you should install this kit on each system in order to
make use of the new image(s).
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
vaxveri01_060.README
vaxveri01_060.CHKSUM
vaxveri01_060.CVRLET_TXT
vaxveri01_060.a-dcx_vaxexe
|
