PLY_FO DFGECO01021 POLYCENTER File Optimizer for OpenVMS V2.1 ECO Summary

Copyright (c) Digital Equipment Corporation 1995. All rights reserved. PRODUCT: POLYCENTER File Optimizer for OpenVMS Version 2.1 OP/SYS: OpenVMS SOURCE: Digital Equipment Corporation ECO INFORMATION: ECO Kit Name: DFGECO01021 ECO Kits Superseded by This ECO Kit: None ECO Kit Approximate Size: DFGECO01021.A 504 Blocks DFGECO01021.B 8253 Blocks DFGECO01021.C 945 Blocks DFGECO01021.D 3465 Blocks DFGECO01021.E 1701 Blocks DFGECO01021.F 1638 Blocks DFGECO01021.G 5418 Blocks DFGECO01021.H 2268 Blocks Total of 8 files - 24192 Blocks System Reboot Necessary: See Release Notes ECO KIT SUMMARY: An ECO kit exists for POLYCENTER File Optimizer for OpenVMS V2.1 on OpenVMS VAX V5.5 through V6.2 or OpenVMS AXP V6.1 through V6.2. This kit addresses the following problems: o Defragmenting of a large active stripeset never completed. o The DEFRAGMENT OFFLINE_VOLUME command did not defragment the INDEXF.SYS file. o Error handling code for the PFO RMS database scheduler was not robust enough. INSTALLATION NOTES: This version of POLYCENTER File Optimizer was compiled with DEC C and needs the DEC C/C++ Run-Time Components to run. These run-time components are not on OpenVMS VAX Versions 5.5-x or 6.0. We have included these run-time components with the POLYCENTER File Optimizer kit. When installing the PFO kit on OpenVMS VAX Versions 5.5-x or 6.0 you will be asked if you want to install the DEC C/C++ Run-Time Components kit. When the DEC C/C++ Run-Time Components kit is installed, some of the shareable image run-time components replace older versions of existing OpenVMS components. Prior to the installation you should read Chapter 1 of the DEC C/C++ Run-Time Components for OpenVMS VAX Reference and Installation Guide. You can extract the reference and installation guide from saveset DFGECO01021.B using the following commands: $ BACKUP/LOG DFGECO01021.B/SAVE * %BACKUP-S-CREATED, created AACRT060.A;1 $ BACKUP/LOG/SELECT=(*.PS,*.TXT) AACRT060.A/SAVE * %BACKUP-S-CREATED, created CRT060_RBI.PS;1 %BACKUP-S-CREATED, created CRT060_RBI.TXT;1 %BACKUP-S-CREATED, created CRT060_REF_INST.PS;1 %BACKUP-S-CREATED, created CRT060_REF_INST.TXT;1 %BACKUP-S-CREATED, created CRT060_RELEASE_NOTES.PS;1 If you are running Defrag PLUS, you must shut down the scheduler before installing the ECO kit. Use the following command: $ @SYS$MANAGER:DFG$STOP_SCHEDULER If you have Defrag PLUS installed, you can use your existing database by answering YES to the question during the installation as shown in an extract of the installation procedure below: %DFGECO01-I-LOGDEFINED, The logical name DFG$DATABASE was defined You have selected the following as a location for the defragmentation scheduling and parameter database: SYS$COMMON:[DFG$DATABASE] * Is this device and directory correct [YES]? The following scheduling/parameter database already exists: SYS$COMMON:[DFG$DATABASE]DFG$DB.DAT; SYS$COMMON:[DFG$DATABASE]DFG$FILE.DAT; SYS$COMMON:[DFG$DATABASE]DFG$GENERAL.DAT; SYS$COMMON:[DFG$DATABASE]DFG$NODE.DAT; SYS$COMMON:[DFG$DATABASE]DFG$QUEUE.DAT; SYS$COMMON:[DFG$DATABASE]DFG$SCRIPT.DAT; SYS$COMMON:[DFG$DATABASE]DFG$VOLUME.DAT; * Do you wish to use it [YES]? The ECO kit is installed with the VMSINSTAL command procedure. $ @SYS$UPDATE:VMSINSTAL DFGECO01021 {location of saveset} This ECO kit is installed in the same manner as the POLYCENTER File Optimizer V2.1 kit as described in Chapter 2 of the POLYCENTER File Optimizer for OpenVMS Guide to Operations.

This patch can be found at any of these sites:

Files on this server are as follows:

dfgeco01021.README
dfgeco01021.CHKSUM
dfgeco01021.CVRLET_TXT
dfgeco01021.a-dcx_axpexe
dfgeco01021.a-dcx_vaxexe
dfgeco01021.b-dcx_axpexe
dfgeco01021.b-dcx_vaxexe
dfgeco01021.c-dcx_axpexe
dfgeco01021.c-dcx_vaxexe
dfgeco01021.d-dcx_axpexe
dfgeco01021.d-dcx_vaxexe
dfgeco01021.e-dcx_axpexe
dfgeco01021.e-dcx_vaxexe
dfgeco01021.f-dcx_axpexe
dfgeco01021.f-dcx_vaxexe
dfgeco01021.g-dcx_axpexe
dfgeco01021.g-dcx_vaxexe
dfgeco01021.h-dcx_axpexe
dfgeco01021.h-dcx_vaxexe