OpenVMS ALP_TW_E01072 Hanyu/Alpha V7.2 ECO Summary
TITLE: OpenVMS ALP_TW_E01072 Hanyu/Alpha V7.2 ECO Summary
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1999. All rights reserved.
Modification Date: 25-AUG-1999
Modification Type: New Kit
PRODUCT: OpenVMS/Hanyu Alpha V7.2
COMPONENTS: [HSYEXE]HMAIL.EXE
[SYSMSG]CLIUTLMSG.EXE
[SYSMSG.HANYU]CLIUTLMSG.EXE
[SYSEXE]DCL.EXE
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ALP_TW_E01072
DEC-AXPVMS-VMS_TW72_UPDATE01-V0100--4.PCSI
ECO Kits Superseded by This ECO Kit: None
ECO Kit Approximate Size: 1648 Blocks
Kit Applies To: OpenVMS/Hanyu Alpha V7.2
System/Cluster Reboot Necessary: Yes (See Installation Notes)
Rolling Re-boot Supported: Not Applicable
Installation Rating: 2
To be installed on all systems running the version
7.2 of OpenVMS/Hanyu with OpenVMS Alpha Version
7.2-1 using the following feature(s): Compaq
AlphaServer GS60, GS60e, GS140, ES40, DS20, DS10,
and Compaq AlphaStation XP900 workstation.
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for OpenVMS/Hanyu Alpha V7.2. This kit addresses the
following problems:
Problems Addressed in the ALP_TW_E01072 Kit:
o System Support
This kit is to enable OpenVMS/Hanyu Alpha Version 7.2 run on
OpenVMS Alpha Version 7.2-1, so that OpenVMS/Hanyu Alpha can
support the following new Alpha systems: Compaq AlphaServer
GS60, GS60e, GS140, ES40, DS20, DS10, and Compaq AlphaStation
XP900 workstation.
o HMAIL
The OpenVMS/Hanyu HMAIL utility, starting with V7.0, if a user
attempt to forward a foreign file, the FORWARD command would
fail and the user is returned to the HMAIL> prompt. No message
of any kind is displayed. It has been modified to correctly
allow forwarding of foreign files.
Image(s) Affected: [HSYEXE]HMAIL.EXE
o SHOW
OpenVMS Registry introduces a new DCL command, SHOW SERVER, to
show the current status of the OpenVMS Registry on a specified
node in OpenVMS V7.2-1. As a result, OpenVMS/Hanyu V7.2 is run-
ning on the OpenVMS V7.2-1, the SHOW utility will only display
the message number, instead of the message if users use the com-
mand "SHOW SERVER" to get the status of the server. The problem
was fixed in this kit.
Image(s) Affected: [SYSMSG]CLIUTLMSG.EXE
[SYSMSG.HANYU]CLIUTLMSG.EXE
o DCL
This new DCL attempts to fix a problem in UNSTACK when unstack
back to procedure level zero in BATCH mode.
Image(s) Affected: [SYSEXE]DCL.EXE
INSTALLATION NOTES:
Install this kit with the PCSI utility by logging into the SYSTEM
account, and typing the following at the DCL prompt:
PRODUCT INSTALL VMS_TW72_UPDATE01 /SOURCE=[location of Kit]
The kit location may be a tape drive, or a disk directory that contains
the kit.
Additional help on installing PCSI kits can be found by typing
HELP PRODUCT INSTALL at the system prompt.
The new images in this kit will not take effect until the system is
rebooted. If you have other nodes in your OpenVMS cluster, they do NOT
require to shut down and reboot.
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
dec-axpvms-vms_tw72_update01-v0100--4.README
dec-axpvms-vms_tw72_update01-v0100--4.CHKSUM
dec-axpvms-vms_tw72_update01-v0100--4.pcsi-dcx_axpexe
alp_tw_e01072.CVRLET_TXT
|
