ACMS] ACMSDI_V7105023 ACMS V2.3/OpenVMS VAX V7.1 ECO Summary
TITLE: ACMS] ACMSDI_V7105023 ACMS V2.3/OpenVMS VAX V7.1 ECO Summary
Modification Date: 11-AUG-98
Modification Type: Updated Kit: Supersedes ACMSDI_V7104023
NOTE: An OpenVMS saveset or PCSI installation file is stored
on the Internet in a self-expanding compressed file.
The name of the compressed file will be kit_name-dcx_vaxexe
for OpenVMS VAX or kit_name-dcx_axpexe for OpenVMS Alpha.
Once the file is copied to your system, it can be expanded
by typing RUN compressed_file. The resultant file will
be the OpenVMS saveset or PCSI installation file which
can be used to install the ECO.
Copyright (c) Compaq Computer Corporation 1998. All rights reserved.
PRODUCT: ACMS Desktop for OpenVMS VAX
OP/SYS: DIGITAL OpenVMS VAX
COMPONENT: DIGITAL TP Desktop Connector for ACMS
SOURCE: Compaq Computer Corporation
ECO INFORMATION:
ECO Kit Name: ACMSDI_V7105023
ECO Kits Superseded by This ECO Kit: ACMSDI_V7104023
ECO Kit Approximate Size: 630 Blocks
322,560 Bytes
Kit Applies To: ACMS Desktop for OpenVMS VAX V2.3
OpenVMS VAX V7.1
System/Cluster Reboot Necessary: No
Installation Rating: Information Not Available
Kit Dependencies:
The following remedial kit(s) must be installed BEFORE
installation of this kit:
None
In order to receive all the corrections listed in this
kit, the following remedial kits should also be installed:
None
ECO KIT SUMMARY:
An ECO kit exists for ACMS V2.3 on OpenVMS VAX V7.1.
ECO 5 is being released for OpenVMS VAX V7.1 only. It contains all
previous server-side/gateway fixes for ACMS Desktop V2.3. No previous
ECOs are required prior to installing this ECO.
Note: ECO 5 for OpenVMS VAX V7.1 is equivalent to ECO 4 for all other VAX
and Alpha OpenVMS platforms.
New Requirements:
As a result of using the revised library the ACMSDI$SERVER account
must contain the SECURITY privilege. Client accounts will not be
required to be ACMS agent accounts; however, the ACMSDI$SERVER account
must be an ACMS agent account as originally required.
o There is a problem with the ACMS Desktop server at times
incorrectly managing its virtual memory. To date the problem
has only been seen on Alpha 8400 machines running VMS 7.1.
However, the logic error is in the ACMS Desktop code and it
would seem that the problem could occur on other machine types
and operating system versions. This can at times result in an
access violation. At other times it results in the generation
of a message similar to the one below:
"%ACMSDI-E-INTERNAL, Internal ACMSDI RPC error
Unable to allocate virtual memory and create a server_bind_id"
When such messages are generated it causes the active client thread
to be dropped.
Solution:
This ECO adds additional cross checking of internal data
structures prior to using their pointer references. It also
corrects the way that memory is probed to determine if it
is safe to be accessed.
o Data compression, when activated, will not compress any workspace
longer than 32K bytes. ACMSDI$DCM lists these workspaces as
incompressible even though they should have been compressed.
Solution:
The compress program is using an unsigned 16-bit integer to keep
track of the number of bytes remaining to be compressed. Therefore
values greater than 32K appeared to be negative. The program,
thinking that there were no bytes left to compress and that no
bytes had been compressed, considered the workspace incompressible.
A fix was applied to change the 16-bit integer to a 32-bit integer.
o The password expiration warning message is returned to the client
even though the time before expiration is not less than the threshold
setting. This can occur when the ACMS Desktop server startup parameter
file contains a value for PASSWORD_EXP which overrides the default
value.
Solution:
This ECO kit contains a correction to the PASSWORD_EXP code to allow
the parameter file setting to be effective.
o An erroneous error message regarding mailbox deletion is logged
upon server shutdown when DECNET is not active.
Solution:
This ECO kit contains a correction so the error message is not logged
when DECNET is not active.
o There is a problem if a version 2.0 or earlier SHOW_DESKTOP_USERS.EXE
is run against a V2.2 or V2.3 ACMS Desktop server. It will corrupt
the memory of the server process. There will not necessarily be an
indication of a problem at the time that the older SHOW_DESKTOP_USERS
is run. Some time later after additional system activity it will
result in a process crash. The symptom of the crash will vary
depending upon the state of the process when the corruption occurred.
Solution:
Additional checks have been added to the ACMS Desktop server to
protect its memory from the effect of a V2.0 or earlier
SHOW_DESKTOP_USERS.EXE.
If an older version of SHOW_DESKTOP_USERS is run against the ACMS
Desktop server with this ECO4 installed, the server will log a
marshaling error to the software event log. The server will ignore
the request and the older client SHOW_DESKTOP_USERS will fail to
complete.
In order to obtain a SHOW_DESKTOP_USERS report, a version that
matches the version of the ACMS Desktop server should be used.
o This ECO fixes a problem with VMS authentication on OpenVMS V7.1.
Clients were unable to sign in to ACMS unless they were ACMS agent
accounts.
This behavior occurred as result of the ACMSDI$SERVER detached
process's username switching during signin. This behavior has
been resolved with a customized authentication library.
Solution:
As a result of using the revised library the ACMSDI$SERVER account
must contain SECURITY privilege. Client accounts will not be
required to be ACMS agent accounts; however, the ACMSDI$SERVER
account must be an ACMS agent account as originally required.
INSTALLATION NOTES:
The system does not need to be rebooted after this kit is installed.
However, if the system is a member of a VMScluster, the other cluster
members should be rebooted or this kit should be installed on each
system in order to make use of the new image(s).
For an OpenVMS VAX V7.1 installation of ACMS Desktop V2.3 ECO5
(ACMSDI_V7105023.A) please follow the following instructions:
While logged in to the privilege account, set default to the SYS$UPDATE
directory:
$ SET DEFAULT SYS$UPDATE
$
Use the following syntax to invoke VMSINSTAL:
@SYS$UPDATE:VMSINSTAL ACMSDI_V7105023 kit-dir: Options N
This patch can be found at any of these sites:
Colorado Site
Georgia Site
Files on this server are as follows:
acmsdi_v7105023.README
acmsdi_v7105023.CHKSUM
acmsdi_v7105023.CVRLET_TXT
acmsdi_v7105023.a-dcx_vaxexe
|
