SEARCH CONTACT US SUPPORT SERVICES PRODUCTS STORE
United States    
COMPAQ STORE | PRODUCTS | SERVICES | SUPPORT | CONTACT US | SEARCH
gears
compaq support options
support home
software & drivers
ask Compaq
reference library
support forum
frequently asked questions
support tools
warranty information
service centers
contact support
product resources
parts for your system
give us feedback
associated links
.
} what's new
.
} contract access
.
} browse patch tree
.
} search patches
.
} join mailing list
.
} feedback
.
patches by topic
.
} DOS
.
} OpenVMS
.
} Security
.
} Tru64 Unix
.
} Ultrix 32
.
} Windows
.
} Windows NT
.
connection tools
.
} nameserver lookup
.
} traceroute
.
} ping
PW-DOS PWV51E03 PATHWORKS V5.1 for DOS and Windows ECO Summary

Copyright (c) Digital Equipment Corporation 1995. All rights reserved. PRODUCT: PATHWORKS V5.1 for DOS and Windows OP/SYS: MS-DOS SOURCE: Digital Equipment Corporation ECO INFORMATION: ECO Kit Name: PWV51E03.ZIP ECO Kits Superseded by This Kit: PWV51E02 PWV51E01 ECO Kit Approximate Size: 2,653,696 MB Kit Applies To: PATHWORKS V5.1 for DOS and Windows ECO KIT SUMMARY: An ECO kit exists for PATHWORKS V5.1 for DOS and Windows. This kit addresses the following problems: ================== REVISION HISTORY ================== * NOTICE * When components listed in this section are grouped together as one fix, THESE COMPONENTS MUST BE UPDATE TOGETHER. ------------------------------------------------------------------------ CTERM.EXE ========= V5.2.01 1- In a SETHOST or VT320 CTERM session with SCO-UNIX, it is not possible to get German umlaute (for example ) in multinational mode. *NOTE* When having this problem, use /8BIT switch to start CTERM.EXE (ex. C:\>CTERM /8BIT). CUSTCNTL.DLL(NEW) LMFS.DLL LMPQ.DLL LMPS.DLL LMSRV.DLL ============ V1.0.1 1- In ManageWORKS V5.1, when changing permissions on a print share, revoking permission for any user or group removes the top entry in the list rather than the one highlighted. *NOTE* Refer to the "Specific Component Instructions Section" of this document for more information. DECPW.386 ========= V5.2.00 1- The new DNR command 'gethostbyaddr' does not work with V5.1, this version enables DNR GETHOSTBYADDR. *NOTE* This component requires installation of DNR.EXE V5.1.03 and WINSOCK.DLL V5.2.050 or later from this kit. DLLNDIS.EXE DLLNDIST.EXE ============ V5.1.059 1- With 3C509 Ethernet adapters using NDIS drivers, the system hangs if a DECBridge sends an 802.2 frame. V5.1.057 1- With SMC and HP Ethernet adapters using NDIS drivers, if broadcast is enabled, multicast fails. DLLODI.EXE ========== V5.1.002 1- Problem copying files from NetWare drive to local drive using ODI driver for 3C509 card in EMS. DNP.EXE DNPD.EXE ======== T5.2.208 1- Performance problems with DNP in version 5.1 when using NetBIOS applications. T5.2.206 1- Running Attachmate Extra for Windows and connecting to an IBM host could cause a problem when trying to reestablish a connection. T5.2.202 1- When running Attachmate Extra for Windows and trying to exit Windows a message would be displayed stating that the application was still communicating on the network and Windows could not restore the state of the network. V5.1.196 1- A small timing window that can cause your PC to hang when starting up a DNP session with another PC. DNR.EXE ======= 5.1.03 1- Nameserver failover did not work. DWDOS286.EXE DWDOS386.EXE DWDOS387.EXE DWDOS.STR DWDOS.VID DWDOS.RGB DWLOGO.EXE ============ V5.1.ae 1- With S3 driver, screen corruption and DWDOS crashed when time passed midnight. V5.1.ad 1- Application hang (debugger revealed a General Protection Fault) when passing a particular symbol. 2- With a VESA driver, screen corruption and DWDOS crashes when the time of day clock passes midnight. V5.1.ac 1- Files containing abs() calls changed to macros. V5.1.ab 1- Long pauses of 20 seconds were observed with one or more connections being dropped. V5.1.aa 1- Problems with diagonal lines "bending" to the vertical when application window is scrolled and line goes partially off the screen (clipping situation). FAL.EXE FALW.EXE FALW.HLP ======== V5.2.002 1- From VMS, a DIR/SIZE of a PC running FAL of a 512 byte file would show 0 blocks. All multiples of 512 were short a block with a DIR/SIZE. V5.2.001 1- A temporary file was not being created when the copy process was invoked from VMS to the PC. Therefore when there was a disconnection the original file was only partially copied. FTP.DLL FTPW.EXE ======== V.5.1.004 1- FTPW unable to connect to The Wollongong Group's FTP server. 2- FTPW unable to connect to NeXT Step's FTP server. INETNAME.EXE ============ V5.1.000 1- Inetname v5.1.002 introduced a problem where it no longer read the NBHOST file. This kit will supply the more stable INETNAME.EXE shipped with v5.1 distribution. KEYBUILD.EXE ============ V3.30 1- Utility to rebuild key files if they are corrupted. *NOTE* Refer to the "Specific Component Instructions Section" of this document for more information. LAT.EXE ======= V5.2.004 1- OSF/1 drops connection or exits application. V5.1.002 1- LAT used 2 SCB table entries each time a session started and only returned 1 when finished. LDU.EXE ======= V5.2.000 1- Can not change UAF password on VMS 5.0 server. MAIL.EXE MAILMSGS.EXE ============ V5.1.009 1- Node "CC::" was interpreted as "CC:"-- Carbon Copy designator--in SEND operation. V5.1.008 1- For certain addresses the TO: field gets prematurely truncated during REPLY or ANNOTATE. V5.1.007 1- Implemented MAILSETU Startup Command file processing. V5.1.006 1- REPLY to Internet mail from ULTRIX system using FROM address rather than RETURN-PATH. MOP.EXE ======= V5.1.001 1- MOP Load/Dump Server could not load the new DECnis image. NETPASS.EXE =========== V5.1.000 1- Corrects problem where UAF password would not get updated. In some cases, Command/Response must be entered in UPPER CASE. This version shipped with V5.1 and included here for use by 5.0x clients. NFTW.EXE ======== V5.2.002 1- NFTW copy with Character conversion from VMS to PC would not work to devices other than the drive were NFTW.EXE resides. *NOTE* The V5.1 NFTW.HLP file will not always correspond correctly to this version of NFTW.EXE. This will be fixed in V5.2 or PATHWORKS. V5.1.001 1- Corrected multiple selection for COPY and DELETE. 2- Modify "Confirm" dialog to be optional after the first file Copy or Delete. PWMGMT.EXE V2.0.020 SVNVIEW.DLL V2.0.010 =========== 1- Menu processing can cause ManageWORKS to become confused. 2- Problem found in ordering of Displayed Components in Options/Displayed components dialog. 3- Problems performing default action on double-click. 4- Problem printing a viewer to a printer (as opposed to a file) would cause a General Protection Fault (GPF) with more than one object selected. SETHOST.EXE =========== V5.1.ab 1- Correct Local Echo problem. 2- Specified modem speed of 38.4K doesn't work in script file. Specify larger capacity variable type for speed storage. V5.1.aa 1- Restore the Network Protocol for each of the 4 sessions defined and saved in SETHOST.DAT, do not default to NET. 2- Restore previous cursor position on return to Sethost from MS-DOS. SPAWNER ======= V5.0.004 1- When an invalid object name or number was used, the previous task was sent to spawner. TCPIP.EXE ========= V5.2.019 1- The PC momentarily hangs when accessing remote server. 2- Performance problems with TCPIP in version 5.1 when using NetBIOS applications. V5.2.010 1- Fixed the NetBIOS problem where stack does not check for MS name table when sending a datagram to server. V5.2.009 1- Fixed the delay symptom found when VT320 is used through TELNET. V5.2.005 1- Missing GIF images when running MOSAIC. V5.1.016 1- When a system is booted with RPL remote boot having TCPIP as one of the transports, TCPIP does not bother to look for the environment variable nor read PWTCP.INI. 2- When Mosaic is used, occasionally there are TCP links that stay in state 10 forever. 3- TCPIP stack used incorrect node address to establish connection to the queried node. 4- Non-blocking i/o socket's swrite() represents latency problem. TN.EXE ====== V5.2.003 1- Telnet not sending/receiving binary data (0xFF in particular) correctly. *NOTE* This version of TN.EXE requires TRMNLAXS.DLL V5.02.002 or later provided in this patch kit. V5.1.004 1- Telnet problems working with TransPATH 350. SETHOST.EXE V5.1.ab from this patch kit also updated to correct this problem. TNCP.EXE TNCPHELP.BIN ============ V5.2.001 1- Add line speed support of 38400. TRMNLAXS.DLL ============ V5.02.002 1- GPF errors with TRMNLAXS.DLL. On some configurations, launch VT320 with no *.INI file, select Communications, select Net, and you get a GPF in TRMNLAXS.DLL. V5.1.003 1- Mode commands to the comm port fail after VT320 is used and possibly other symptoms related to interrupt 14 and comm ports. VT320.EXE ========= V5.1.013 1- In certain cases an extra blank page was being sent to the printer at the end of a print job. V5.1.012 1- Running applications using FMS forms caused VT320 to enter an erratic state that eventually ends up in a GP fault. If the invalid data was accessed, it eventually caused the emulator to fault. V5.1.011 1- Print Controller mode would not output data to a file or printer. V5.1.010 1- DTR and RTS were not being dropped when disconnecting a modem. V5.1.009 1- Problems with VT320 printing (mostly w/ HP LaserJet 4): - Correct problem with HP LaserJet 4 fonts. The VT320 now uses default fonts for the HP LasetJet 4 in auto print mode, printer controller mode and printscreen. - Correct problem where the last page of a document would not eject from the printer (again mostly HP LaserJet 4). - Correct problem where the escape sequence to enter printer controller mode, 5i, would turn controller mode off if it was already on. Now this sequence is ignored if printer controller mode is on (all printers). 2- Answerback string not sent when received with Keyboard Action Mode set. Now sends answerback string even when keyboard is locked. 3- Script log file opened in REPLACE mode instead of APPEND mode. Script log files now opened with APPEND so new data is added to end. 4- Keymap files not loaded when LOAD: script command executed. Add Keymap_Init() call to LOAD script command. 5- Eject page when encountered when in Autoprint Mode. 6- CANCELing out of Print Mode dialog box does not reset settings. WINSOCK.DLL ============ V5.2.051 1- Fixed problem with invalid returns when using non-blocking I/O. V5.2.050 1- Increased the number of blocking hooks to 64. WSM_WP.DLL ========== 1- All efforts to change the password of a Workstation Manager Database failed without error or warning. That is, it appeared that the password was changed, when in fact it was not changed.



This patch can be found at any of these sites:

Colorado Site
Georgia Site



Files on this server are as follows:

pwv51e03.README
pwv51e03.CHKSUM
pwv51e03.zip

privacy and legal statement