The parenthesized number on an index entry indicates the location of the entry within the book. Entries before the first numbered section in a chapter are identified as Sec. n.0.
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
A
acl_mode attribute (Sec. B.0)
act_vers_high attribute (Sec. B.0)
act_vers_low attribute (Sec. B.0)
adding a cluster member (Sec. 5.0)
Advanced File System
See AdvFS
AdvFS
domain version number (Sec. 8.3.3)
using when installing Tru64 UNIX (Sec. 3.2)
alias
See cluster alias
aliasd daemon (Sec. 3.3.1)
controlling which gated configuration file is used (Sec. 3.3.1)
RIP default protocol (Sec. 3.3.1)
Alpha systems
firmware CD-ROM (Sec. 3.1)
Asynchronous Transport Mode
See ATM kernel options
ATM kernel options (Sec. 3.2)
automount daemon
NFS file systems and clu_create (Sec. 4.3)
auto_action console variable (Sec. 5.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
B
backups
during a rolling upgrade (Sec. 7.6.1)
BASE_VERSION variable (Sec. B.0)
bcheckrc command (Sec. 7.2)
bcheckrc command (Sec. 7.2)
Berkeley Internet Name Domain
See BIND
BIND
configuring cluster as client or server (Sec. 3.3.3)
blocking layered products (Sec. 7.9.2)
boot messages
after clu_add_member (Sec. D.2)
after clu_create (Sec. D.1)
bootdef_dev console variable (Sec. 2.6)
bootdef_dev console variable (Sec. 5.2)
setting for Fibre Channel devices (Sec. 2.6)
setting for HS devices (Sec. 2.6)
booting
after clu_add_member (Sec. 5.4)
after clu_create (Sec. 4.4)
boot_dev console variable (Sec. 2.6)
boot_osflags console variable (Sec. 2.6)
boot_reset console variable (Sec. 2.6)
bus_probe_algorithm console variable (Sec. 2.6)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
C
CAA
testing lead member during a rolling upgrade (Sec. 7.2)
caa_stat command (Sec. 4.4)
caution
blocking layered products and rolling upgrade (Sec. 7.7)
booting correct member disk (Sec. 5.4)
creating tagged files (Sec. 7.6.2)
deleting members before re-creating a cluster (Sec. 6.1)
not booting base operating system while cluster is running (Sec. 2.4.1.1)
not configuring the system as a DHCP client (Sec. 3.3.6)
not deleting files in /var/adm/update (Sec. 7.6.2)
CDE
requiring network interface to be associated with host name (Sec. 5.4)
CDSL (Sec. 4.4)
cfsmgr command (Sec. 7.2)
clean stage (Sec. 7.6.8)
cluamgr command (Sec. 4.4)
cluamgr command (Sec. 7.2)
cluamgr command (Sec. 7.2)
CLUAMGR_ROUTE_ARGS variable (Sec. 2.3.1)
CLUAMGR_ROUTE_ARGS variable (Sec. 3.3.1)
cluster alias
aliasd daemon (Sec. 3.3.1)
default alias IP address (Sec. 2.3.1)
IPv6 addresses (Sec. 2.3.1)
RIS registration (Sec. 7.10)
testing lead member during a rolling upgrade (Sec. 7.2)
cluster application availability
See CAA
cluster interconnect (Sec. 2.3.3)
adapter (Sec. 8.7.1)
Class C subnet addresses (Sec. 2.3.3)
IP names and addresses (Sec. 2.3.3)
LAN (Sec. 1.1)
LAN (Sec. 2.3)
Memory Channel (Sec. 2.3)
clusterwide file systems
allocating disks for (Sec. 2.4.1.2)
defined (Sec. 1.4)
free space required for a rolling upgrade (Sec. 7.6.1)
cluster_expected_votes attribute (Sec. 2.5)
cluster_interconnect attribute (Sec. B.0)
cluster_map_create command (Sec. 8.3.2)
cluster_name attribute (Sec. B.0)
CLUSTER_NET variable (Sec. B.0)
cluster_node_inter_name attribute (Sec. B.0)
cluster_node_name attribute (Sec. B.0)
cluster_node_votes attribute (Sec. B.0)
cluster_qdisk_major attribute (Sec. B.0)
cluster_qdisk_minor attribute (Sec. B.0)
cluster_qdisk_votes attribute (Sec. B.0)
cluster_seqdisk_major attribute (Sec. B.0)
cluster_seqdisk_minor attribute (Sec. B.0)
clu_add_member command (Sec. 1.3)
clu_add_member command (Sec. 5.0)
clu_add_member command (Sec. 5.3)
configuration file (Sec. 6.3)
log file (Sec. 5.3)
sample log file (Sec. C.2)
CLU_BOOT_FILESYSTEM variable (Sec. B.0)
clu_check_config command
log file (Sec. 4.4)
log file (Sec. 5.4)
clu_create command (Sec. 1.3)
configuration file (Sec. 6.3)
log file (Sec. 4.3)
NFS file systems, ensuring accessibility (Sec. 4.3)
sample log file (Sec. C.1)
clu_delete_member command (Sec. 1.3)
clu_get_info command (Sec. 4.4)
clu_migrate_check script (Sec. 8.4)
clu_migrate_configure script (Sec. 8.4)
clu_migrate_recover script (Sec. 8.4)
clu_migrate_save script (Sec. 8.4)
CLU_NEW_MEMBER variable (Sec. B.0)
clu_quorum command (Sec. 4.4)
clu_upgrade command (Sec. 1.3)
check command (Sec. 7.3)
check roll [memberid] command (Sec. 7.3)
check setup command (Sec. 7.2)
check setup command (Sec. 7.6.1)
clean command (Sec. 7.2)
clean command (Sec. 7.6.8)
completed command (Sec. 7.3)
log file (Sec. 7.6.2)
log file (Sec. 7.6.8)
postinstall command (Sec. 7.2)
postinstall command (Sec. 7.6.5)
preinstall command (Sec. 7.2)
preinstall command (Sec. 7.6.3)
roll command (Sec. 7.2)
roll command (Sec. 7.6.6)
sample log file (Sec. C.3)
setup command (Sec. 7.2)
setup command (Sec. 7.6.2)
started command (Sec. 7.3)
status command (Sec. 7.3)
switch command (Sec. 7.2)
switch command (Sec. 7.6.7)
tagged add command (Sec. 7.7)
tagged check command (Sec. 7.3)
tagged check command (Sec. 7.7)
tagged disable command (Sec. 7.7)
tagged enable command (Sec. 7.7)
undo command (Sec. 7.4)
version command (Sec. 7.5)
CLU_VERSION variable (Sec. B.0)
cmon command (Sec. 8.3.2)
Common Desktop Environment
See CDE
configuration file (Sec. 6.3)
console variables
bootdef_dev (Sec. 2.6)
boot_dev (Sec. 2.6)
boot_osflags (Sec. 2.6)
boot_reset (Sec. 2.6)
bus_probe_algorithm (Sec. 2.6)
context-dependent symbolic link
See CDSL
creating a cluster (Sec. 4.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
D
DEC_VERSION_TAG property (Sec. 7.7)
default cluster alias
IP address (Sec. 2.3.1)
testing lead member during a rolling upgrade (Sec. 7.2)
DHCP
client, cluster not supported as (Sec. 3.3.6)
server, configuring cluster as (Sec. 3.3.6)
disk space
planning for rolling upgrade (Sec. 2.4.5)
required for installation (Sec. 2.4.4)
diskconfig command (Sec. 3.5.1)
disklabel command (Sec. 3.5.1)
disks
configuring for cluster (Sec. 3.5.1)
disk space recommendations (Sec. 2.4.4)
Fibre Channel (Sec. 2.4)
labeling before using (Sec. 3.5.1)
mapping special file names to physical devices (Sec. 3.5.2)
not copying member boot disks (Sec. 5.4)
number needed for installation (Sec. 2.4)
planning for a rolling upgrade (Sec. 2.4.5)
required free space for a rolling upgrade (Sec. 7.6.1)
documentation
HTML versions of
needed for installation (Sec. 2.1)
Domain Version Number
See DVN
drdmgr command (Sec. 4.4)
drd_nopr_list attribute (Sec. B.0)
dupatch command (Sec. 7.2)
dupatch command (Sec. 7.6.4)
DVN (Sec. 8.3.3)
Dynamic Host Configuration Protocol
See DHCP
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
E
enhanced security
configuring (Sec. 3.4)
/etc/gated.conf
copied or created by installation (Sec. B.0)
/etc/gated.conf.member<n> (Sec. B.0)
/etc/hosts
updated by installation (Sec. B.0)
/etc/ifaccess.conf
updated by installation (Sec. B.0)
/etc/inittab
updated by installation (Sec. B.0)
/etc/rc.config
BASE_VERSION variable (Sec. B.0)
CLUAMGR_ROUTE_ARGS variable (Sec. 3.3.1)
CLUSTER_NET variable (Sec. B.0)
CLU_BOOT_FILESYSTEM variable (Sec. B.0)
CLU_NEW_MEMBER variable (Sec. B.0)
CLU_VERSION variable (Sec. B.0)
GATED variable (Sec. B.0)
GATED_FLAGS variable (Sec. B.0)
HOSTNAME variable (Sec. B.0)
IFCONFIG variable (Sec. 2.3.3)
IMC_AUTO_INIT variable (Sec. B.0)
IMC_MAX_ALLOC variable (Sec. B.0)
IMC_MAX_RECV variable (Sec. B.0)
MAX_NETDEVS variable (Sec. B.0)
NETDEV variable (Sec. 2.3.3)
NETDEV variable (Sec. B.0)
NRCONFIG variable (Sec. B.0)
NRDEV variable (Sec. B.0)
NR_DEVICES variable (Sec. B.0)
NUM_NETCONFIG variable (Sec. B.0)
PAGERAW variable (Sec. B.0)
ROUTER variable (Sec. B.0)
saving a copy of (Sec. 4.5)
saving a copy of (Sec. 5.5)
TCR_INSTALL variable (Sec. B.0)
TCR_PACKAGE variable (Sec. B.0)
updated by installation (Sec. B.0)
XLOGIN variable (Sec. B.0)
XNTPD_CONF variable (Sec. B.0)
XNTPD_OPTS variable (Sec. B.0)
XNTP_SERV variable (Sec. B.0)
/etc/rc.config.common
CLUAMGR_ROUTE_ARGS variable (Sec. 2.3.1)
CLUAMGR_ROUTE_ARGS variable (Sec. 3.3.1)
saving a copy of (Sec. 4.5)
/etc/sysconfigtab
acl_mode attribute (Sec. B.0)
act_vers_high attribute (Sec. B.0)
act_vers_low attribute (Sec. B.0)
cluster_expected_votes attribute (Sec. 2.5)
cluster_expected_votes attribute (Sec. B.0)
cluster_expected_votes attribute (Sec. B.0)
cluster_interconnect attribute (Sec. B.0)
cluster_name attribute (Sec. B.0)
cluster_node_inter_name attribute (Sec. B.0)
cluster_node_name attribute (Sec. B.0)
cluster_node_votes attribute (Sec. B.0)
cluster_qdisk_major attribute (Sec. B.0)
cluster_qdisk_minor attribute (Sec. B.0)
cluster_qdisk_votes attribute (Sec. B.0)
cluster_seqdisk_major attribute (Sec. B.0)
cluster_seqdisk_minor attribute (Sec. B.0)
drd_nopr_list attribute (Sec. B.0)
ics_tcp_adapter0 attribute (Sec. B.0)
ics_tcp_inetaddr0 attribute (Sec. B.0)
ics_tcp_netmask0 attribute (Sec. B.0)
ics_tcp_nr0 attribute (Sec. B.0)
lsm_rootdev_is_volume attribute (Sec. B.0)
memberid attribute (Sec. B.0)
msgbuf_size attribute (Sec. B.0)
new_vers_high attribute (Sec. B.0)
new_vers_low attribute (Sec. B.0)
rolls_ver_lookup attribute (Sec. B.0)
saving a copy of (Sec. 4.5)
saving a copy of (Sec. 5.5)
swapdevice attribute (Sec. B.0)
updated by installation (Sec. B.0)
vm_page_free_min attribute (Sec. B.0)
vm_page_free_reserved attribute (Sec. B.0)
/etc/sysconfigtab.cluster
saving a copy of (Sec. 4.5)
saving a copy of (Sec. 5.5)
/etc/sysconfigtab.cluster (Sec. B.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
F
Fibre Channel
bootdef_dev console variable (Sec. 2.6)
required reading (Sec. 2.4)
file system layout
cluster (Sec. 2.4.3)
firmware
updating from the Alpha Systems Firmware CD-ROM (Sec. 3.1)
updating from the Alpha Systems Firmware CD-ROM (Sec. 5.1)
full installation (Sec. 1.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
G
gated daemon
interaction with aliasd (Sec. 3.3.1)
use as routing daemon in a cluster (Sec. 3.3.1)
GATED variable (Sec. B.0)
GATED_FLAGS variable (Sec. B.0)
/genvmunix
booting members with (Sec. 5.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
H
hardware mirroring (Sec. 2.4)
host name
conventions (Sec. 2.3)
HOSTNAME variable (Sec. B.0)
HTML
documentation in
hwmgr command (Sec. 3.5.2)
hwmgr command (Sec. 6.3)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
I
I18N support
See WLS
ics_tcp_adapter0 attribute (Sec. B.0)
ics_tcp_inetaddr0 attribute (Sec. B.0)
ics_tcp_netmask0 attribute (Sec. B.0)
ics_tcp_nr0 attribute (Sec. B.0)
IFCONFIG variable
relationship to number of cluster interconnect adapters (Sec. 2.3.3)
IMC_AUTO_INIT variable (Sec. B.0)
IMC_MAX_ALLOC variable (Sec. B.0)
IMC_MAX_RECV variable (Sec. B.0)
init command (Sec. 7.2)
init command (Sec. 7.2)
install stage (Sec. 7.6.4)
installation
configuration files (Sec. 6.3)
disk requirements (Sec. 2.4)
synopsis of steps (Sec. 1.4)
types (Sec. 1.2)
installupdate command (Sec. 7.2)
installupdate command (Sec. 7.6.4)
IP name and address
cluster interconnect (Sec. 2.3.3)
default cluster alias (Sec. 2.3.1)
network interfaces (Sec. 2.3.2)
IPv6 (Sec. 2.3.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
K
kernel
ATM configuration options (Sec. 3.2)
building for other than first member (Sec. 5.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
L
LAN
cluster interconnect (Sec. 1.1)
cluster interconnect (Sec. 2.3)
cluster interconnect (Sec. 8.1)
layered products
blocking (Sec. 7.9.2)
general guidelines for rolling upgrade (Sec. 7.9.1)
lead member (Sec. 7.6.1)
lead member (Sec. 7.7)
license
adding members (Sec. 5.3)
cluster requirements (Sec. 1.5)
operating system for additional members (Sec. 5.4)
registering TruCluster Server (Sec. 4.1)
lmf reset command (Sec. 7.2)
lmf reset command (Sec. 7.2)
local area network
See LAN
log file
clu_add_member command (Sec. 5.3)
clu_add_member command (Sec. C.2)
clu_check_config command (Sec. 4.4)
clu_check_config command (Sec. 5.4)
clu_create command (Sec. 4.3)
clu_create command (Sec. C.1)
clu_upgrade command (Sec. 7.6.2)
clu_upgrade command (Sec. C.3)
Logical Storage Manager
See LSM
LSM
importing volumes during upgrade (Sec. 8.4)
installing the base operating system with (Sec. 3.2)
location of physical devices (Sec. 2.4.1.2)
manual configuration during upgrade (Sec. E.2)
mirroring file systems after creating a cluster (Sec. 2.4.2)
restrictions (Sec. 2.4)
lsm_rootdev_is_volume attribute (Sec. B.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
M
mail
configuring cluster as a server (Sec. 3.3.7)
MAX_NETDEVS variable (Sec. B.0)
member boot disk (Sec. 2.4.1.3)
Fibre Channel (Sec. 2.4)
HSZ70 and HSZ80 restriction (Sec. 2.4.1)
locating for clu_add_member (Sec. 3.5.2)
not copying (Sec. 5.4)
rolling upgrade space requirement (Sec. 2.4.5)
rolling upgrade space requirement (Sec. 7.6.1)
using RAID devices (Sec. 2.4.1)
member ID (Sec. 2.2)
memberid attribute (Sec. B.0)
Memory Channel
adapter (Sec. 8.7.1)
cluster interconnect (Sec. 2.3)
memory requirement (Sec. 1.8)
mirroring file systems (Sec. 2.4)
mount -o server_only command (Sec. 8.3.3)
msgbuf_size attribute (Sec. B.0)
multiple-bus failover (Sec. 2.6)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
N
NETDEV variable (Sec. B.0)
relationship to number of cluster interconnect adapters (Sec. 2.3.3)
NetRAIN
/etc/rc.config configuration variables (Sec. B.0)
/etc/sysconfigtab attribute (Sec. B.0)
Network File System
See NFS
Network Information Service
See NIS
network services
configuring (Sec. 3.3)
Network Time Protocol
See NTP
New Hardware Delivery
See NHD
new_vers_high attribute (Sec. B.0)
new_vers_low attribute (Sec. B.0)
NFS
configuring cluster as client or server (Sec. 3.3.4)
file systems and clu_create (Sec. 4.3)
nfsmount stop command (Sec. 4.3)
NHD
installing kits during a rolling upgrade (Sec. 7.1)
nhd_install command (Sec. 7.2)
nhd_install command (Sec. 7.6.4)
NIS
configuring cluster as client or server (Sec. 3.3.5)
NRCONFIG variable (Sec. B.0)
NRDEV variable (Sec. B.0)
NR_DEVICES variable (Sec. B.0)
NTP
configuring cluster as client or server (Sec. 3.3.2)
NUM_NETCONFIG variable (Sec. B.0)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
O
ogated daemon
not supported in a cluster (Sec. 3.3.1)
.Old.. files (Sec. 7.7)
Open Shortest Path First
See OSPF
operating system
installing (Sec. 3.2)
OSPF (Sec. 3.3.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
P
PAGERAW variable (Sec. B.0)
PAK (Sec. 4.1)
partitioned file system (Sec. 8.3.3)
postinstall stage (Sec. 7.6.5)
preinstall stage (Sec. 7.6.3)
preparation stage (Sec. 7.6.1)
print server
configuring cluster as (Sec. 3.3.8)
private network addresses (Sec. 2.3)
Product Authorization Key
See PAK
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
Q
quorum
allocating votes (Sec. 2.5)
sysconfigtab attributes (Sec. B.0)
sysconfigtab attributes (Sec. B.0)
quorum disk (Sec. 2.4.1.4)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
R
RAID
mirroring boot disks (Sec. 2.4.1)
mirroring shared file systems (Sec. 2.4.3)
mirroring the quorum disk (Sec. 2.4)
Redundant Array of Independent Disks
See RAID
reinstalling a cluster member (Sec. 6.0)
Remote Installation Services
See RIS
Request for Comments
See RFC
reserved network addresses (Sec. 2.3)
RFC
1035, Network Time Protocol (Sec. 3.3.2)
1123, Requirements for Internet Hosts (Sec. 2.3)
1918, Address Allocation for Private Internets (Sec. 2.3)
1918, Address Allocation for Private Internets (Sec. 2.3.1)
952, DoD Internet Host Table Specification (Sec. 2.3)
/.rhosts
allowing ASE member access when upgrading (Sec. 8.6.1)
allowing ASE member access when upgrading (Sec. 8.7.1)
updated by installation (Sec. B.0)
RIP (Sec. 3.3.1)
RIS
registering the default cluster alias (Sec. 7.10)
roll stage (Sec. 7.6.6)
rolling patch
See rolling upgrade
rolling upgrade
See also stages
rolling upgrade (Sec. 7.0)
backups during (Sec. 7.6.1)
checking the status of (Sec. 7.3)
disk space requirements (Sec. 2.4.5)
disk space requirements (Sec. 7.6.1)
lead member (Sec. 7.6.1)
lead member (Sec. 7.7)
NHD (Sec. 7.1)
patch (Sec. 7.1)
procedure (Sec. 7.2)
stages (Sec. 7.6)
tagged files (Sec. 7.7)
testing the lead member with CAA (Sec. 7.2)
testing the lead member with cluster alias (Sec. 7.2)
undoing a stage (Sec. 7.4)
updating the Tru64 UNIX operating system disk (Sec. 7.1)
version switch (Sec. 7.8)
rolls_ver_lookup attribute (Sec. 7.6.2)
rolls_ver_lookup attribute (Sec. 7.7)
rolls_ver_lookup attribute (Sec. B.0)
root file system
rolling upgrade space requirement (Sec. 2.4.5)
rolling upgrade space requirement (Sec. 7.6.1)
routed daemon
not supported in a cluster (Sec. 3.3.1)
ROUTER variable (Sec. B.0)
Routing Information Protocol
See RIP
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
S
security
configuring (Sec. 3.4)
setld command
loading TruCluster Server kit (Sec. 4.2)
setup stage (Sec. 7.6.2)
shutdown command (Sec. 4.4)
SRM firmware
updating from the Alpha Systems Firmware CD-ROM (Sec. 3.1)
updating from the Alpha Systems Firmware CD-ROM (Sec. 5.1)
stages
checking the status of (Sec. 7.3)
clean (Sec. 7.6.8)
install (Sec. 7.6.4)
postinstall (Sec. 7.6.5)
preinstall (Sec. 7.6.3)
preparation (Sec. 7.6.1)
roll (Sec. 7.6.6)
setup (Sec. 7.6.2)
switch (Sec. 7.6.7)
time required to perform (Sec. 7.2)
undoing (Sec. 7.4)
subsets
contents of (Sec. 1.6)
installing (Sec. 4.2)
operating system (Sec. 1.7)
sizes (Sec. 1.6)
swapdevice attribute (Sec. B.0)
switch stage (Sec. 7.6.7)
/sys/<HOSTNAME>/vmunix
default name for new kernel (Sec. B.0)
/sys/conf/<HOSTNAME>.list (Sec. B.0)
SysMan Station (Sec. 3.5.2)
system files
modifications to (Sec. B.0)
System Reference Manual
See SRM firmware
sys_check command (Sec. 6.3)
where to get (Sec. E.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
T
tagged files (Sec. 7.7)
creating during setup stage (Sec. 7.6.2)
creating for OSF, TCR, and IOS product codes (Sec. 7.7)
removing during clean stage (Sec. 7.6.8)
rules for creating (Sec. 7.7)
verifying during preinstall stage (Sec. 7.6.3)
verifying existence of (Sec. 7.3)
TCR_INSTALL variable (Sec. B.0)
TCR_PACKAGE variable (Sec. B.0)
time service
configuring (Sec. 3.3.2)
NTP (Sec. 3.3.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
U
UFS
mounting as partitioned file system (Sec. 8.3.3)
read-only clusterwide (Sec. 1.8)
read/write member only (Sec. 1.8)
UNIX File System
See UFS
updadmin command (Sec. 7.6.8)
upgrade scripts (Sec. 8.4)
upgrading to Version 5.1A (Sec. 1.2)
from Version 1.5 or 1.6 (Sec. 8.0)
from Version 5.1 (Sec. 7.0)
/usr file system
rolling upgrade space requirement (Sec. 2.4.5)
rolling upgrade space requirement (Sec. 7.6.1)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
V
/var file system
rolling upgrade space requirement (Sec. 2.4.5)
rolling upgrade space requirement (Sec. 7.6.1)
version switch (Sec. 7.8)
versw command (Sec. 7.8)
vMAC
algorithm for creating a hardware address (Sec. 7.10)
/vmunix
CDSL and (Sec. 1.8)
other cluster members (Sec. 5.4)
vm_page_free_min attribute (Sec. B.0)
vm_page_free_reserved attribute (Sec. B.0)
volencap command (Sec. 2.4.2)
volmigrate command (Sec. 2.4.2)
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
W
WLS
i18n file system rolling upgrade space requirement (Sec. 2.4.5)
i18n file system rolling upgrade space requirement (Sec. 7.6.1)
installing in a separate file system (Sec. 3.2)
Worldwide Language Support
See WLS
|
Click letter for quick access: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z |
X
XLOGIN variable (Sec. B.0)
xntpd daemon
recommended time service (Sec. 3.3.2)
XNTPD_CONF variable (Sec. B.0)
XNTPD_OPTS variable (Sec. B.0)
XNTP_SERV variable (Sec. B.0)