Master Index

Click letter for quick access:
[Numbers] A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

D

daemon
        aliasd ClusTechOver (Sec. 6.2)
        autofsd ClusAdmin (Sec. 7.6.2.5), NetAdminSvcs (Sec. 4.1.2)
        automount NetAdminSvcs (Sec. 4.1.2)
        binlogd SystemAdmin (Sec. 12.1.2)
        bootpd TechOver (Sec. 3.5.4)
        caad ClusTechOver (Sec. 5.2)
        gated ClusAdmin (Sec. 3.1), NetAdminConnect (Sec. 2.2.1.8), TechOver (Sec. 3.5.5)
        inetd ClusAdmin (Sec. 7.7), NetProgGde (Sec. 4.7.7), OncRpcProgram (Sec. 2.5.3), OncRpcProgram (Sec. 3.3.6)
        joind NetAdminConnect (Sec. 5.3.7)
        lockd ClusAdmin (Sec. 7.6.1)
        lpd SystemAdmin (Sec. 8.4.3)
        LSM StorageManager (Sec. 6.2)
        mountd NetAdminSvcs (Sec. 4.5.1)
        PC-NFS NetAdminSvcs (Sec. 4.3.1)
        portmap Prestoserve (Sec. 2.4.2.1)
        pppd NetAdminConnect (Sec. 6.2.1.2)
        prestoctl_svc Prestoserve (Sec. 2.4.2.5)
        printer ClusAdmin (Sec. 7.3)
        routed ClusAdmin (Sec. 3.1), NetAdminConnect (Sec. 2.2.1.6)
        rsvpd NetProgGde (Sec. 7.4.2)
        rwhod NetAdminConnect (Sec. 2.2.1.5)
        statdd ClusAdmin (Sec. 7.6.1)
        syslogd SystemAdmin (Sec. 12.1.1)
        xntpd NetAdminSvcs (Sec. 6.0)

data
        preserving during installation InstallGde (Sec. 6.14.5)
        receiving on a virtual circuit AsynchronousTM (Sec. 5.2)
        recovering SystemAdmin (Sec. 9.0)

data access
See JDBC, ODBC

data cache collision
avoiding ProgGde (Sec. 8.3.2.2.1)

data cache misses
profiling for ProgGde (Sec. 8.3.2.2.1)

data copying routines KernelModules (Sec. 5.2)

data flow TechOver (Sec. 3.4.1)

data interaction GUIs in CDE CDEProgOverview

Data Link Interface
See DLI

data link interfaces NetProgGde (Sec. 2.0)

Data Link Provider Interface
See DLPI

data manipulation CallingStandard (Sec. 4.0)

data structure
        ATM AsynchronousTM (Sec. 2.9)
        displaying value and format of with dbx debugger KernelDebug (Sec. 2.1.5)
        global AsynchronousTM (Sec. 2.9)
        kernel thread KernelModules (Sec. 9.2)
        module NetProgGde (Sec. 5.3.1)
        simple lock KernelModules (Sec. 7.1)
        sockets NetProgGde (Sec. 4.2.3.4)
        STREAMS message NetProgGde (Sec. 5.3.2)
        used by kernel thread routines KernelModules (Sec. 9.2)

data transfer
in DLI NetProgGde (Sec. F.4.8)
with sockets NetProgGde (Sec. 4.3.6)

data type CDEAdvUsr, CDEUser, CLangRef
        alignment in structures ProgGde (Sec. 2.2.3)
        converting CLangRef
        creating manually CDEAdvUsr
        creating with Create Action CDEAdvUsr
        types supported by Tru64 UNIX ProgGde (Sec. 2.2)
        types supported in assembly language AsmLangGde (Sec. 2.7.3)

data typing
and CDE application development CDEProgGde, CDEProgOverview

database search path CDEAdvUsr

database security
group CommandShellGde (Sec. 5.1.2)

database server CDEAdvUsr

Dataless Management Services
See DMS

date and time
setting during installation InstallGde (Sec. 6.9)

date command SystemAdmin (Sec. 2.8)

date value
formatting rules in a locale InternatProg (Sec. 7.2.6)

dbx debugger ProgGde (Sec. 5.0), SystemTune (Sec. 3.6.7), TechOver (Sec. 6.2.1)
        crash dump analysis with KernelDebug (Sec. 2.1), KernelDebug (Sec. 4.2.1), KernelDebug (Sec. 4.3.1)
        debugging kdbx extensions with KernelDebug (Sec. 3.5)
        debugging kernel threads with KernelDebug (Sec. 4.4)
        displaying call stack of user program after kernel crash with KernelDebug (Sec. 2.1.9)
        displaying preserved message buffer KernelDebug (Sec. 2.1.10)
        displaying value and format of variable and data structure with KernelDebug (Sec. 2.1.5)
        examining exception frames with KernelDebug (Sec. 2.1.8)
        identifying cause of crash on SMP system KernelDebug (Sec. 4.5)
        identifying hardware exceptions with KernelDebug (Sec. 4.3)
        kernel debugging with KernelDebug (Sec. 2.1)
        syntax for examining dump files KernelDebug (Sec. 2.1.1)

DDR SystemAdmin (Sec. 5.6.1)

DE50x adapter
configuring autonegotiation ClusLANInterconnect (Sec. 4.7.1)

DE60x adapter
configuring autonegotiation ClusLANInterconnect (Sec. 4.7.1)

debugging an application SystemTune (Sec. 11.1)

debugging the kernel SystemTune (Sec. 3.5)

debugging tools
        See also dbx debugger, Ladebug debugger, lint, Third Degree
        crashdc utility KernelDebug (Sec. 2.4)
        dbx debugger KernelDebug (Sec. 2.1)
        kdbx debugger KernelDebug (Sec. 2.2)
        kdebug debugger KernelDebug (Sec. 2.3)
        supported by Tru64 UNIX ProgGde (Sec. 1.3.3)

DECevent event management utility SystemAdmin (Sec. 12.0)
        bit-to-text translation DECevent
        dia command DECevent
        event analysis and notification DECevent
        features DECevent
        interactive command shell DECevent
        ls command DECevent
        realtime event logging DECevent
        reports DECevent
        shw command DECevent
        system settings DECevent

declaration CLangRef, OncRpcProgram (Sec. 2.8.5)

DECnet protocol ClusAdmin (Sec. 7.8)
for X client/server connections XWinSysEnv (Sec. 3.3.3)

DECterm software
escape sequences for ruled lines InternatProg (Sec. D.1)

DECwindows Motif
migrating to CDE CDECompanion (Sec. 6.0)
migrating to CDE applications CDECompanion (Sec. 7.2.4)

default cluster alias ClusAdmin (Sec. 3.1), ClusAdmin (Sec. 3.1), ClusTechOver (Sec. 6.3)
        IP address ClusInstall (Sec. 2.3.1)
        NFS clients using ClusAdmin (Sec. 7.6.2.1)
        relationship to out_alias service attribute ClusAdmin (Sec. 7.10)

default permissions
setting with umask CommandShellGde (Sec. 5.5)

DEFAULTALIAS keyword ClusAdmin (Sec. 3.1)

deferred mode swapping SystemAdmin (Sec. 3.7.3)

deleting a directory CommandShellGde (Sec. 4.6)

desktop CDEUser
customizing CDEUser

desktop help CDEUser

Desktop KornShell
See dtksh (Desktop KornShell)

desktop management in CDE application development CDEProgOverview

desktop session CDEUser
        logging in to CDEUser
        logging out of CDEUser
        managing CDECompanion (Sec. 4.0)

/dev directory SystemAdmin (Sec. 5.5)

Developer's Documentation Kit DocOverview (Sec. 1.5.2)

development environment ProgGde (Sec. 1.0)

device
        adding to the kernel SystemAdmin (Sec. 4.5.1)
        configuring SystemAdmin (Sec. 5.5)
        determining device location ClusAdmin (Sec. 9.2.2)
        direct-access I/O ClusAdmin (Sec. 9.4.1)
        managing third-party storage ClusAdmin (Sec. 9.2.3)
        single-server ClusAdmin (Sec. 9.4.1)

device driver
        ATM structures AsynchronousTM (Sec. 3.5)
        interface AsynchronousTM (Sec. 3.0)
        MMI AsynchronousTM (Sec. 7.5)
        queuing guidelines AsynchronousTM (Sec. 8.1)
        registering with CMM AsynchronousTM (Sec. 3.1)
        unregistering with CMM AsynchronousTM (Sec. 3.4)

device driver documentation
books in set described DocOverview (Sec. 7.0)

device mnemonics SystemAdmin (Sec. B.0)

device name SystemAdmin (Sec. 5.5)
naming conventions InstallGde (Sec. A.0)
network adapter ClusLANInterconnect (Sec. 3.1.1)

device pathname
explanation of SystemAdmin (Sec. 8.4.2.4)
representation in printcap SystemAdmin (Sec. 8.4.2.4)

device request dispatcher ClusTechOver (Sec. 2.3)

device security Security (Sec. 8.0)

device special file NetProgGde (Sec. 5.5)
representation in printcap SystemAdmin (Sec. 8.4.2.4)

device special file management utility ClusAdmin (Sec. 9.2.1)

device special file names
converting old-style and new-style ProgGde (Sec. E.0)

device unit number
setting ClusHWConfig (Sec. 6.9.1.3)

df command ClusAdmin (Sec. 1.2)

DHCP NetAdminConnect (Sec. 5.0)
        and security NetAdminConnect (Sec. 5.4.4)
        client, cluster not supported as ClusInstall (Sec. 3.3.6)
        configuring ClusAdmin (Sec. 7.1)
        configuring a server NetAdminConnect (Sec. 5.3)
        monitoring clients NetAdminConnect (Sec. 5.4.2)
        planning for configuration NetAdminConnect (Sec. 5.1.1)
        server, configuring cluster as ClusInstall (Sec. 3.3.6)
        troubleshooting NetAdminConnect (Sec. 8.6)

dia command DECevent
binary event-logging reports SystemAdmin (Sec. 12.0)

diagnostic utility support
adding a diagnostic utility to the TruCluster Server environment ClusAvailApp (Sec. 7.4)

dial-in connection NetAdminConnect (Sec. 6.3.2)

dial-out connection NetAdminConnect (Sec. 6.3.3)

dialog box
creating for CDE help CDEHelp

Differences application
comparing files with CDECompanion (Sec. 5.3.2)

direct I/O ClusAdmin (Sec. 9.3.3.5)
gathering statistics on ClusAdmin (Sec. 9.3.3.5.3)
Oracle Parallel Server ClusLANInterconnect (Sec. 1.2)

direct-access I/O device ClusAdmin (Sec. 9.4.1)

directive
        assembler directives AsmLangGde (Sec. 5.0)
        pragma assert directives ProgGde (Sec. 3.1)
        pragma environment ProgGde (Sec. 3.2)
        pragma extern_model directives ProgGde (Sec. 3.3)
        pragma extern_prefix ProgGde (Sec. 3.4)
        pragma function ProgGde (Sec. 3.6)
        pragma inline ProgGde (Sec. 3.5)
        pragma intrinsic ProgGde (Sec. 3.6)
        pragma linkage ProgGde (Sec. 3.7)
        pragma member_alignment ProgGde (Sec. 3.8)
        pragma message ProgGde (Sec. 3.9)
        pragma optimize ProgGde (Sec. 3.10)
        pragma pack ProgGde (Sec. 3.11)
        pragma pointer_size ProgGde (Sec. 3.12)
        pragma use_linkage ProgGde (Sec. 3.13)
        pragma weak ProgGde (Sec. 3.14)

directory CommandShellGde (Sec. 2.0), CommandShellGde (Sec. 2.3.2), CommandShellGde (Sec. 3.10)
        backing up SystemAdmin (Sec. 9.0)
        changing owner of CommandShellGde (Sec. 5.8)
        recovering SystemAdmin (Sec. 9.0)
        removing CommandShellGde (Sec. 4.6.1)
        renaming CommandShellGde (Sec. 4.5)

directory permissions CommandShellGde (Sec. 5.3), CommandShellGde (Sec. 5.4.1.2)

dirty-region logging
See DRL

dis (object file tool) ProgGde (Sec. 2.7.5)

disability issues and CDE application development CDEProgOverview

disk
        availability SystemTune (Sec. 2.6.2)
        backup SystemAdmin (Sec. 9.0)
        cloning SystemAdmin (Sec. 5.7.5)
        copying SystemAdmin (Sec. 5.7.5)
        deporting ClusAdmin (Sec. 10.4)
        determining location ClusAdmin (Sec. 9.2.2)
        distributing I/O SystemTune (Sec. 8.1)
        dynamic partitioning during full installation InstallGde (Sec. 4.1.1)
        high-performance SystemTune (Sec. 2.4)
        high-performance configuration SystemTune (Sec. 2.5)
        LSM SystemTune (Sec. 8.4)
        managing SystemTune (Sec. 8.0)
        monitoring SystemAdmin (Sec. 6.7.2)
        monitoring I/O distribution SystemTune (Sec. 8.3)
        preserving data on during installation InstallGde (Sec. 6.14.5)
        RAID SystemTune (Sec. 2.5.3)
        striping SystemTune (Sec. 2.5.2)

disk drive
testing with diskx SystemAdmin (Sec. 11.4.6)

disk group
importing LSM ClusAdmin (Sec. 10.4)
managing StorageManager (Sec. 5.1.7)

disk label SystemAdmin (Sec. 5.7.4), SystemAdmin (Sec. 6.1.2)

disk partition SystemAdmin (Sec. 5.7.4), SystemAdmin (Sec. 6.1.2)
on DMS server SharingSW (Sec. 10.3)

disk quota SystemAdmin (Sec. 6.5)

disk space
        DMS SharingSW (Sec. 10.6)
        planning InstallGdeAdvTop (Sec. 3.9.2)
        planning for rolling upgrade ClusInstall (Sec. 2.4.5)
        planning, cluster ClusInstall (Sec. 2.4.4)
        reallocating SystemAdmin (Sec. 5.7.4)
        RIS SharingSW (Sec. 3.2)

disk storage shelf
        BA350 ClusHWConfig (Sec. 10.3.1)
        BA356 ClusHWConfig (Sec. 10.3.2.1)
        UltraSCSI BA356 ClusHWConfig (Sec. 10.3.2.2)

disk usage SystemAdmin (Sec. 5.7.6)

disk writes
CFS ClusLANInterconnect (Sec. 1.1), ClusLANInterconnect (Sec. 1.2)
Oracle Parallel Server ClusLANInterconnect (Sec. 1.2)

disklabel command SystemAdmin (Sec. 5.7.4)

diskusg command SystemAdmin (Sec. 10.6.2)

diskx exerciser SystemAdmin (Sec. 11.4.6)

dispatch point callback KernelModules (Sec. 4.0)

dispatch table OncRpcProgram (Sec. 2.5.4)

DISPLAY environment variable
setting from different shells CDECompanion (Sec. 5.2.2)

Display Manager TechOver (Sec. 8.2.5)

displaying a directory CommandShellGde (Sec. 4.3)

displaying information
        command status CommandShellGde (Sec. 6.4)
        differences between files CommandShellGde (Sec. 3.7)
        disk group StorageManager (Sec. 4.1)
        job status of uucp CommandShellGde (Sec. 14.8)
        process information CommandShellGde (Sec. 6.5)
        variable values CommandShellGde (Sec. 7.7.3)

displaying online reference pages CommandShellGde (Sec. 1.6)

distance comparision
Memory Channel and LAN interconnect ClusLANInterconnect (Sec. 1.1)

distributed application
moving to TruCluster Server ClusAvailApp (Sec. 6.0)
running in a cluster ClusAvailApp (Sec. 1.1.3)

distributed lock manager
See DLM

distributed naming services TechOver (Sec. 3.6)
See also BIND, NIS

distributed processing ClusLANInterconnect (Sec. 1.3)

distributed system services
naming services TechOver (Sec. 3.6)
time services TechOver (Sec. 3.7)

distribution media
producing for kernel products ProdKitGde (Sec. 7.3)
producing for user products ProdKitGde (Sec. 6.2)

division of privileges
See DOP

DLI NetProgGde (Sec. F.0), TechOver (Sec. 3.4.5)
        and accessing the local area network NetProgGde (Sec. F.2.3)
        binding a socket NetProgGde (Sec. F.4.5)
        calculating buffer size NetProgGde (Sec. F.4.7)
        creating a socket NetProgGde (Sec. F.4.3)
        deactivating a socket NetProgGde (Sec. F.4.9)
        filling the sockaddr_dl structure NetProgGde (Sec. F.4.6)
        services NetProgGde (Sec. F.2.1)
        setting socket options NetProgGde (Sec. F.4.4)
        transferring data NetProgGde (Sec. F.4.8)
        using system calls NetProgGde (Sec. F.4.2)
        writing programs NetProgGde (Sec. F.4)

DLI program
including higher-level services NetProgGde (Sec. F.2.4)

DLM ClusTechOver (Sec. 7.0), ClusTechOver (Sec. 8.0)
        advanced locking techniques ClusAvailApp (Sec. 9.6)
        canceling a conversion request ClusAvailApp (Sec. 9.5)
        converting locks ClusAvailApp (Sec. 9.3.4)
        deadlock detection ClusAvailApp (Sec. 9.3.5)
        dequeuing locks ClusAvailApp (Sec. 9.4)
        functions ClusAvailApp (Sec. 9.1)
        identifying resources ClusAvailApp (Sec. 9.2.3)
        local buffer caching ClusAvailApp (Sec. 9.7)
        namespaces ClusAvailApp (Sec. 9.2.2)
        resource granularity ClusAvailApp (Sec. 9.2.1)
        use of the cluster interconnect ClusLANInterconnect (Sec. 1.1)
        using locks ClusAvailApp (Sec. 9.3)
        using to synchronize access to shared resources in a cluster ClusAvailApp (Sec. 9.0)

DLPI NetProgGde (Sec. 2.0), TechOver (Sec. 3.4.6)
        addressing NetProgGde (Sec. 2.3)
        connection mode service NetProgGde (Sec. 2.2.2)
        connectionless mode service NetProgGde (Sec. 2.2.3)
        local management service NetProgGde (Sec. 2.2.1)
        modes of communication NetProgGde (Sec. 2.1)
        supported primitives NetProgGde (Sec. 2.4), NetProgGde (Sec. 8.2.1)
        types of service NetProgGde (Sec. 2.2)

DMS SharingSW (Sec. 1.0), SharingSW (Sec. 9.0), TechOver (Sec. 2.10)
        adding software SharingSW (Sec. 11.3)
        disk space planning SharingSW (Sec. 10.6)
        installing software SharingSW (Sec. 11.2)
        lack of support in cluster ClusAdmin (Sec. 1.2)
        root area SharingSW (Sec. 9.3.1)
        setting up a LAN SharingSW (Sec. 10.4)
        setting up NFS SharingSW (Sec. 10.5)
        troubleshooting SharingSW (Sec. 13.0)
        updating software SharingSW (Sec. D.0)

DMS area SharingSW (Sec. 1.1), SharingSW (Sec. 9.3)

DMS area maintenance SharingSW (Sec. 12.0)

DMS client SharingSW (Sec. 1.1), SharingSW (Sec. 12.0), SharingSW (Sec. 9.3), SharingSW (Sec. 9.3.4)
        area SharingSW (Sec. 9.3.3)
        building an Asian kernel SharingSW (Sec. 11.5.3)
        compatibility with server SharingSW (Sec. 11.1)
        preparing SharingSW (Sec. 10.0)
        registering SharingSW (Sec. 10.8)
        requirements SharingSW (Sec. 10.2)
        WLS setup SharingSW (Sec. 11.5.2)

DMS environment SharingSW (Sec. 12.0), SharingSW (Sec. 9.3.2)
        configuring SharingSW (Sec. 11.4)
        on DMS server SharingSW (Sec. 11.0)
        software sharing environment SharingSW (Sec. 1.2)

DMS server SharingSW (Sec. 1.1), SharingSW (Sec. 9.3)
        architecture SharingSW (Sec. 9.3)
        compatibility with client SharingSW (Sec. 11.1)
        creating DMS environment on SharingSW (Sec. 11.0)
        disk partitions SharingSW (Sec. 10.3)
        installing operating system on SharingSW (Sec. 10.7)
        managing SharingSW (Sec. 12.0)
        preparing SharingSW (Sec. 10.0)
        requirements SharingSW (Sec. 10.1)
        WLS setup SharingSW (Sec. 11.5.1)

DNS NetAdminSvcs (Sec. 2.0)
        configuring a caching-only server NetAdminSvcs (Sec. 2.5.3)
        configuring a client NetAdminSvcs (Sec. 2.5.6)
        configuring a forward-only server NetAdminSvcs (Sec. 2.5.4)
        configuring a master server NetAdminSvcs (Sec. 2.5.1)
        configuring a slave server NetAdminSvcs (Sec. 2.5.2)
        configuring a stub server NetAdminSvcs (Sec. 2.5.5)
        deconfiguring NetAdminSvcs (Sec. 2.7)
        enabling authentication NetAdminSvcs (Sec. 2.3), NetAdminSvcs (Sec. 2.6)
        enabling dynamic updates NetAdminSvcs (Sec. 2.2), NetAdminSvcs (Sec. 2.5.1.2), NetAdminSvcs (Sec. 2.6)
        IPv6 data format NetAdminConnect (Sec. 3.3.5)
        IPv6 record type NetAdminConnect (Sec. 3.3.5)
        named.conf file NetAdminSvcs (Sec. G.0)
        resource records NetAdminSvcs (Sec. G.0)
        testing master servers NetAdminSvcs (Sec. 11.8)
        testing servers NetAdminSvcs (Sec. 11.0)
        troubleshooting NetAdminSvcs (Sec. 9.3), NetAdminSvcs (Sec. 9.4)
        updating server data files NetAdminSvcs (Sec. 2.2), NetAdminSvcs (Sec. 2.5.1.2), NetAdminSvcs (Sec. 2.8.2)

doconfig program SystemAdmin (Sec. 4.5.1), SystemAdmin (Sec. 4.5.2), SystemAdmin (Sec. 4.5.3)

document type definition
See DTD

documentation
        See also online documentation
        in printed form DocOverview (Sec. 1.5)
        on line DocOverview (Sec. 1.4)

Documentation CD-ROM DocOverview (Sec. 1.4.1)
mounting InstallGde (Sec. 8.2)

documentation kits
See Developer's Documentation Kit, End User Documentation Kit, General User Documentation Kit, Startup Documentation Kit, System and Network Management Documentation Kit, Tru64 UNIX Documentation Kit

documentation on the World Wide Web DocOverview (Sec. 1.4.2)

dodisk shell script SystemAdmin (Sec. 10.6.1)

dohash utility NetAdminSvcs (Sec. 7.5.2)

domain
expanding cluster root ClusAdmin (Sec. 1.2)

Domain Name System
See DNS

DOP Security (Sec. G.0)

drag-and-drop behavior
        CDE guidelines for CDEStyle
        implementing with Application Builder AppBuilder
        in CDE application development CDEProgOverview
        integrating into CDE applications CDEProgGde

drdmgr command ClusAdmin (Sec. 9.3.3.1), ClusAdmin (Sec. 9.4)

driver
        bridging BSD driver to STREAMS protocol stack NetProgGde (Sec. 8.2)
        bridging STREAMS driver to sockets protocol stack NetProgGde (Sec. 8.1)
        Token Ring NetProgGde (Sec. E.1)

driver program
compiler system ProgGde (Sec. 2.1)

DRL
size recommendations ClusAdmin (Sec. 10.6)

dsfcvt* routines ProgGde (Sec. E.0)

dsfmgr command ClusAdmin (Sec. 9.2.1)

dtcm
See Calendar

DtComboBox
text field and list box widget CDEProgGde

DTD
CDE HelpTag CDEHelp

DtEditor text editor widget CDEProgGde

dthelpgen command CDEHelp

dthelptag command CDEHelp

dthelpview command CDEHelp

dticon Icon Editor CDEUser

dtksh (Desktop KornShell) CDEProgOverview
using to create Motif applications Desktopksh

dtksh app-defaults file Desktopksh
variables in Desktopksh

dtksh callback Desktopksh

dtksh commands Desktopksh

dtksh context variable Desktopksh

dtksh functions
return values of Desktopksh

dtksh script
localizing Desktopksh
writing Desktopksh

dtmail utility NetAdminSvcs (Sec. 7.7)
        and CDE application development CDEProgOverview
        basic interchange CDEInternatProg
        using CDEUser

DtMenuButton
menu button widget CDEProgGde

dtpad Text Editor
and CDE application development CDEProgOverview

dtsession CDECompanion (Sec. 6.1.2)

DtSpinBox
text field and arrow button widget CDEProgGde

dtterm terminal emulator CDEAdvUsr
and CDE application development CDEProgOverview
using CDEUser

dump command SystemAdmin (Sec. 9.4)

dump file
See crash dump file

duplicating a root disk SystemAdmin (Sec. 9.7.5)

DVD-ROM drive ClusAdmin (Sec. 9.2.7)

dxaccounts utility SystemAdmin (Sec. 7.2.2)

dxpresto command
monitoring Prestoserve with Prestoserve (Sec. 3.2.5)

dxpresto software subset
installing Prestoserve (Sec. 2.0)

Dynamic Device Recognition
See DDR

dynamic disk partitioning
during full installation InstallGde (Sec. 4.1.1)

Dynamic Host Configuration Protocol
See DHCP

dynamically configurable subsystem
creating ProgGde (Sec. C.0)