Index for Section 8

Alphabetical listing for P

prestoctl_svc(8)
NAME
  prestoctl_svc - Prestoserve control daemon

SYNOPSIS
  /usr/sbin/prestoctl_svc -n

DESCRIPTION
  The prestoctl_svc RPC-based daemon allows remote client systems to monitor
  and administer a Prestoserve cache and its driver.  The client system does
  not have to be running the Prestoserve software.  The daemon can be started
  manually, or it can be started each time you reboot by adding the command
  to a startup sequence script for the machine running the Prestoserve
  software.

  You must run the prestoctl_svc daemon if you want remote client systems to
  be able to use the presto -h command to monitor and manage your system and
  if you want to use the dxpresto command.  Refer to presto(8) and to
  dxpresto(8X) for more information.

  You must already be running the portmap daemon if you want to use the
  prestoctl_svc daemon.

FLAGS
  -n   Allows remote client systems to manage a Prestoserve cache and its
       driver.	The -n option allows remote client systems to change the size
       of a Prestoserve cache and to change the state of a Prestoserve cache
       by using remote procedure calls.	 The -n option is useful when
       evaluating or demonstrating Prestoserve capabilities.  Because of
       security problems, it is recommended that the -n option not be used on
       production machines.

FILES
  /dev/pr0	    Generic Prestoserve control device.

RELATED INFORMATION
  presto(8), dxpresto(8X), presto(7), portmap(8)