 |
Index for Section 1 |
|
 |
Alphabetical listing for P |
|
pfstat(1)
NAME
pfstat - Print packet filter status information
SYNOPSIS
/usr/bin/pfstat [options] [system]
OPTIONS
If no options are given, then all are assumed (except for the verbose
option, -v).
c Counts. Displays various counts (per ethernet unit) including number
of packets sent and received, the number of packets dropped due to full
input queues, the number of packets not wanted by any filter, and the
number of packets missed by the interface.
d Descriptors. Displays OpenDescriptors for each minor device.
f Filters. Displays packet filters for each minor device.
p Parameters. Displays device parameters including device type, header
and address lengths, maximum transmission units (MTU), and interface
and broadcast addresses.
q QueueElements. Displays the QueueElements.
s Scavenger. Displays the FreeQueue and Scavenger statistics.
v Verbose. Displays information for minor devices not actually in use
and complete queue information, only if this option is given.
<digit>
Limits output to information about specified units. If no digits are
given, all units are displayed. Valid digits are 0 to 7.
DESCRIPTION
The pfstat command interprets the data structures of the packet filter
driver packetfilter(7). The data structures are contained in /dev/kmem.
If system is given, the required namelist is taken from there; otherwise,
it is taken from /vmunix.
RESTRICTIONS
Some of the output is a bit cramped to fit on an 80-character line. It
should be possible to get a less verbose but more readable listing.
Since things happen quickly, it is not likely that pfstat will provide a
consistent view of a running system. It is mostly useful for analyzing
static or slowly-varying problems, not transient ones.
OUTPUT FORMAT
This section describes the information displayed in the output of the
pfstat command under the headings AllDescriptors, Filters, and QueueElts.
AllDescriptors
# Minor device number for open descriptor.
LOC Descriptor location.
LINK-QUEUE
Forward link to other descriptors.
STATE
Blank, or one of the following:
wait Waiting for input, indefinite wait
timed Waiting for input, timed wait
tout Has timed out
WAIT-QUEUE
Addresses of ``Queue Elements'' for waiting packets.
NQ'D
Number of packets queued for input/maximum for this queue.
TOUT
Timeout duration in clock ticks (if the -v [Verbose] option is not
given, then times may be expressed as minutes [with a trailing ``m''],
hours [with a trailing ``h''], or simply ``long'', to keep the columns
lined up.)
MODE
Shows which mode bits are set for the minor device; each bit is encoded
as a single character:
H ENHOLDSIG
B ENBATCH
T ENTSTAMP
P ENPROMISC
N ENNONEXCL
C ENCOPYALL
b ENBPFHDR
? An unknown mode bit is set.
SIG Signal number to be delivered when a packet arrives.
PROC
Process to be signaled when a packet arrives.
PID Process id which enabled the signal.
Filters
# Minor device number of filter.
COUNT
Count of packets accepted by this filter.
DROPS
Count of ``recent'' drops for this filter.
PRI Priority of filter. (Not applicable to BPF-style filters.)
LEN Length of filter (in shortwords).
FILTER
See packetfilter(7) for interpretation of packet filters. See bpf(7)
for interpretation of BPF-style filters.
QueueElts
LOC Location of queue element.
LINK-QUEUE
Forward and backward links.
COUNT
Packet size.
REF Reference count for queue element.
FLAGS
Per-packet flag bits set; each bit is encoded as a single character:
P ENSF_PROMISC
B ENSF_BROADCAST
M ENSF_MULTICAST
T ENSF_TRAILER
? An unknown flag bit is set.
DROP
Count of packets dropped between the time previous packet was queued
and the time this packet was queued.
TIME
Approximate time this packet was received.
FILES
/vmunix
Namelist
/dev/kmem
Default source of tables
SEE ALSO
Commands: netstat(1), pfconfig(8)
Files: bpf(7), packetfilter(7)