This appendix contains samples of the text-based default and custom installations.
This section shows a sample text-based default installation from
a CD-ROM on the drive with console device name
dkb100
to a system
disk with console device name
dka100.
Use this sample to follow
the progress of your own default installation.
>>>boot dkb100INIT-S-CPU... INIT-S-RESET_TC... INIT-S-ASIC... INIT-S-MEM... INIT-S-NVR... INIT-S-SCC... INIT-S-NI... INIT-S-SCSI... INIT-S-ISDN... INIT-S-TC0... AUDIT_BOOT_STARTS ... AUDIT_CHECKSUM_GOOD AUDIT_LOAD_BEGINS AUDIT_LOAD_DONE Digital UNIX boot - Thu Jan 14 15:03:19 EST 1999 Loading vmunix ... Loading at 0xffffffff00000000 Current PAL Revision <0x10538> Switching to OSF PALcode Succeeded New PAL Revision <0x2012d> Mapping Image Address Space Mapping complete Sizes: text = 5808144 data = 1769136 bss = 3424400 Starting at 0xffffffff00210890 Alpha boot: available memory from 0xe14000 to 0x4000000 Digital UNIX X4.0F-4 (Rev. 1180); Thu Jan 14 16:04:52 EST 1999 physical memory = 64.00 megabytes. available memory = 50.71 megabytes. using 79 buffers containing 0.61 megabytes of memory emx: dynamic addressing enabled tc0 at nexus scc0 at tc0 slot 7 tcds0 at tc0 slot 6 scsi0 at tcds0 slot 0 rz1 at scsi0 target 1 lun 0 (LID=0) (DEC RZ26 (C) DEC T392) rz3 at scsi0 target 3 lun 0 (LID=1) (DEC RZ26 (C) DEC T386) rz4 at scsi0 target 4 lun 0 (LID=2) (DEC RRD42 (C) DEC 4.5d) scsi1 at tcds0 slot 1 rz9 at scsi1 target 1 lun 0 (LID=3) (DEC RZ26 (C) DEC 392A) tz13 at scsi1 target 5 lun 0 (LID=4) (DEC TLZ06 (C)DEC 0374) ln0: DEC LANCE Module Name: PMAD-BA ln0 at tc0 slot 7 ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-39-CA-C0 fb0 at tc0 slot 0 1280X1024 DEC 3000 - M400 system Firmware revision: 7.0 PALcode: Digital UNIX version 1.45 vm_swap_init: warning /sbin/swapdefault swap device not found vm_swap_init: swap is set to lazy (over commitment) mode INIT: SINGLE-USER MODE Initializing system for Digital UNIX installation. Please wait... *** Performing CDROM Installation Loading installation process and scanning system hardware. Welcome to the DIGITAL UNIX Installation Procedure This procedure installs DIGITAL UNIX onto your system. You will be asked a series of system configuration questions. Until you answer all questions, your system is not changed in any way. During the question and answer session, you can go back to any previous question and change your answer by entering: history You can get more information about a question by entering: help There are two types of installations: o The Default Installation installs a mandatory set of software subsets on a predetermined file system layout. o The Custom Installation installs a mandatory set of software subsets plus optional software subsets that you select. You can customize the file system layout. The UNIX Shell option puts your system in single-user mode with superuser privileges. This option is provided for experienced UNIX system administrators who want to perform file system or <Press RETURN for more>: [Return] disk maintenance tasks before the installation. The Installation Guide contains more information about installing DIGITAL UNIX. 1) Default Installation 2) Custom Installation 3) UNIX Shell Enter your choice: 1 Choose a hostname for this system. The hostname identifies the system on the network. The hostname must start with a letter, and may include letters, numbers, periods and hyphens. Enter the hostname for this system: mysystem Enter a password to use as the root (superuser) password. Be sure to remember this password, because it is needed to log in as the user "root" following installation. Enter root password: Retype root password: Select the location that best describes your site. This is to determine what time zone your site is in. If your location includes multiple time zones (e.g., Canada), the next question will ask you which of those you want. 1) Australia 12) GB-Eire 23) MET 34) Turkey 2) Belfast 13) GMT 24) Mexico 35) UCT 3) Brazil 14) Greenwich 25) NZ 36) US 4) CET 15) Hongkong 26) NZ-CHAT 37) UTC 5) Canada 16) Iceland 27) Navajo 38) Universal 6) Chile 17) Iran 28) PRC 39) W-SU 7) Cuba 18) Israel 29) Poland 40) WET 8) Dublin 19) Jamaica 30) ROC 41) Zulu 9) EET 20) Japan 31) ROK 10) Egypt 21) Libya 32) Singapore 11) Factory 22) London 33) SystemV Enter your choice: 36 Select one of these "US" time zones. 1) Alaska 5) East-Indiana 9) Michigan 2) Aleutian 6) Eastern 10) Mountain 3) Arizona 7) Hawaii 11) Pacific 4) Central 8) Indiana-Starke 12) Samoa Enter your choice: 6 Enter the current date (as mm-dd-[cc]yy): 01-26-1999 Enter the current time in 24-hour format (as hh:mm): 14:37 Choose a disk to be the system disk where the DIGITAL UNIX software will be installed using the default layout: * root file system on the "a" partition, type UFS * /usr file system on the "g" partition, type UFS * /var as part of /usr * first swapping area (swap1) on the "b" partition * no second swapping area (swap2) This table lists the disks connected to your system. Disk Device Device Controller Controller Type Name Number Name Number 1) RZ26 rz1 1 SCSI 0 2) RZ26 rz3 3 SCSI 0 3) RZ26 rz9 9 SCSI 1 Enter your choice: 1 root will use file system type UFS. /usr will be on partition g of disk rz1 /usr will use file system type UFS. swap1 will be on partition b of disk rz1 Because this is the default disk layout, no secondary swap area (swap2) will be created. Because this is the default disk layout, /var will be on /usr. ** Reviewing available software subsets. Please wait ... Because this is a Default installation, only the mandatory software subsets will be loaded. These are: * Base System * Base System - Hardware Support * Base System Management Applications and Utilities <Press RETURN for more>: [Return] * Basic Networking Configuration Applications * Basic Networking Services * Basic X Environment * CDE Desktop Environment * CDE Mail Interface * CDE Minimum Runtime Environment * Compiler Back End * DECwindows 100dpi Fonts * Graphical Base System Management Utilities * Graphical Print Configuration Application * Graphical System Administration Utilities * Hardware Kernel Header and Common Files * Hardware Kernel Modules * Insight Manager * Java 1.1.7B-2 Environment * Kernel Header and Common Files * LK401 Keyboard Support * Local Printer Support * Logical Storage Manager Kernel Header and Common Files * Logical Storage Manager Kernel Modules * NFS(tm) Configuration Application * NFS(tm) Utilities * Netscape Communicator V4.5 <Press RETURN for more>: [Return] * Old X Environment * POLYCTR advfs Kernel Modules * Standard Kernel Modules * Tcl Commands * Tk Toolkit Commands * X Fonts * X Servers Base * X Servers for TurboChannel You have now answered all questions needed to install DIGITAL UNIX on this system. Press CTRL/C to cancel the installation; or type "history" to modify your earlier answers; or press RETURN to proceed with installation: [Return] Continuing installation... *** Creating the root file system on device rz1a *** *** Creating the usr file system on device rz1g *** *** Creating the swap1 file system on device rz1b *** *** Loading the operating system software subsets *** The installation procedure will now load the software on your disk partitions. This process will take from 45 to 120 minutes to complete depending on your distribution media and processor type. Checking file system space required to install specified subsets: Working....Tue Jan 26 14:39:18 EST 1999 File system space checked OK. 34 subset(s) will be installed. Loading 1 of 34 subset(s).... Base System Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:39:40 EST 1999 Verifying Working....Tue Jan 26 14:41:45 EST 1999 Loading 2 of 34 subset(s).... Base System - Hardware Support Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:42:26 EST 1999 Verifying Loading 3 of 34 subset(s).... Compiler Back End Copying from /ALPHA/BASE (disk) Verifying Loading 4 of 34 subset(s).... Kernel Header and Common Files Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:43:05 EST 1999 Verifying Working....Tue Jan 26 14:44:22 EST 1999 Loading 5 of 34 subset(s).... Standard Kernel Modules Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:44:41 EST 1999 Verifying Loading 6 of 34 subset(s).... Hardware Kernel Header and Common Files Copying from /ALPHA/BASE (disk) Verifying Loading 7 of 34 subset(s).... Hardware Kernel Modules Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:45:11 EST 1999 Verifying Loading 8 of 34 subset(s).... Logical Storage Manager Kernel Header and Common Files Copying from /ALPHA/BASE (disk) Verifying Loading 9 of 34 subset(s).... Logical Storage Manager Kernel Modules Copying from /ALPHA/BASE (disk) Verifying Loading 10 of 34 subset(s).... POLYCTR advfs Kernel Modules Copying from /ALPHA/BASE (disk) Verifying Loading 11 of 34 subset(s).... Tcl Commands Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:46:05 EST 1999 Verifying Loading 12 of 34 subset(s).... Basic Networking Services Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:46:21 EST 1999 Verifying Loading 13 of 34 subset(s).... NFS(tm) Utilities Copying from /ALPHA/BASE (disk) Verifying Loading 14 of 34 subset(s).... Local Printer Support Copying from /ALPHA/BASE (disk) Verifying Loading 15 of 34 subset(s).... Basic X Environment Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:47:02 EST 1999 Verifying Working....Tue Jan 26 14:47:43 EST 1999 Loading 16 of 34 subset(s).... CDE Minimum Runtime Environment Copying from /ALPHA/BASE (disk) Verifying Loading 17 of 34 subset(s).... CDE Desktop Environment Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:48:16 EST 1999 Verifying Working....Tue Jan 26 14:50:17 EST 1999 Loading 18 of 34 subset(s).... X Servers Base Copying from /ALPHA/BASE (disk) Verifying Loading 19 of 34 subset(s).... X Servers for TurboChannel Copying from /ALPHA/BASE (disk) Verifying Loading 20 of 34 subset(s).... X Fonts Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:51:02 EST 1999 Verifying Loading 21 of 34 subset(s).... DECwindows 100dpi Fonts Copying from /ALPHA/BASE (disk) Verifying Loading 22 of 34 subset(s).... LK401 Keyboard Support Copying from /ALPHA/BASE (disk) Verifying Loading 23 of 34 subset(s).... Old X Environment Copying from /ALPHA/BASE (disk) Verifying Loading 24 of 34 subset(s).... CDE Mail Interface Copying from /ALPHA/BASE (disk) Verifying Loading 25 of 34 subset(s).... Tk Toolkit Commands Copying from /ALPHA/BASE (disk) Verifying Loading 26 of 34 subset(s).... Java 1.1.7B-2 Environment Copying from /ALPHA/BASE (disk) Verifying Loading 27 of 34 subset(s).... Netscape Communicator V4.5 Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:52:36 EST 1999 Verifying Loading 28 of 34 subset(s).... Base System Management Applications and Utilities Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:53:12 EST 1999 Verifying Loading 29 of 34 subset(s).... Basic Networking Configuration Applications Copying from /ALPHA/BASE (disk) Verifying Loading 30 of 34 subset(s).... NFS(tm) Configuration Application Copying from /ALPHA/BASE (disk) Verifying Loading 31 of 34 subset(s).... Graphical Base System Management Utilities Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:53:52 EST 1999 Verifying Loading 32 of 34 subset(s).... Graphical System Administration Utilities Copying from /ALPHA/BASE (disk) Verifying Loading 33 of 34 subset(s).... Graphical Print Configuration Application Copying from /ALPHA/BASE (disk) Verifying Loading 34 of 34 subset(s).... Insight Manager Copying from /ALPHA/BASE (disk) Working....Tue Jan 26 14:54:34 EST 1999 Verifying 34 of 34 subset(s) installed successfully. The installation software has successfully installed your system. There are logfiles that contain a record of your installation. These are: /var/adm/smlogs/install.cdf - configuration description file /var/adm/smlogs/install.log - general log file /var/adm/smlogs/install.FS.log - file system creation logs /var/adm/smlogs/setld.log - log for the setld(8) utility /var/adm/smlogs/fverify.log - verification log file The above message is also recorded in /etc/motd for your future reference. Issue the following console commands to set your default bootpath variable and to boot your system disk to multiuser: >>> set boot_osflags A >>> set bootdef_dev DKA100 >>> boot syncing disks... done CPU 0: Halting... (transferring to monitor) ?05 HLT INSTR PC= FFFFFFFF.00212520 PSL= 00000000.00000005 >>>set boot_osflags ABOOT_OSFLAGS = A >>>set bootdef_dev DKA100BOOTDEF_DEV = DKA100 >>>boot
System initialization messages display as the system boots from the newly-installed system. Software configuration begins next:
*** SYSTEM CONFIGURATION ***
Configuring "Base System " (OSFBASE440)
Configuring "Base System - Hardware Support " (OSFHWBASE440)
Configuring "Compiler Back End " (OSFCMPLRS440)
Configuring "Kernel Header and Common Files " (OSFBINCOM440)
Configuring "Standard Kernel Modules " (OSFBIN440)
Configuring "Hardware Kernel Header and Common Files" (OSFHWBINCOM440)
Configuring "Hardware Kernel Modules " (OSFHWBIN440)
Configuring "Logical Storage Manager Kernel Header and Common Files"
(OSFLSMBINCOM440)
Configuring "Logical Storage Manager Kernel Modules" (OSFLSMBIN440)
Configuring "POLYCTR advfs Kernel Modules " (OSFADVFSBIN440)
Configuring "Tcl Commands " (OSFTCLBASE440)
Configuring "Basic Networking Services " (OSFCLINET440)
Configuring "NFS(tm) Utilities " (OSFNFS440)
Configuring "Local Printer Support " (OSFPRINT440)
Configuring "Basic X Environment " (OSFX11440)
Configuring "CDE Minimum Runtime Environment " (OSFCDEMIN440)
Configuring "CDE Desktop Environment " (OSFCDEDT440)
Configuring "X Servers Base " (OSFSER440)
Configuring "X Servers for TurboChannel " (OSFSERTC440)
Configuring "X Fonts " (OSFMITFONT440)
Configuring "DECwindows 100dpi Fonts " (OSFFONT15440)
Configuring "LK401 Keyboard Support " (OSFKBDLK401440)
Configuring "Old X Environment " (OSFOLDX11440)
Configuring "CDE Mail Interface " (OSFCDEMAIL440)
Configuring "Tk Toolkit Commands " (OSFTKBASE440)
Configuring "Java 1.1.7B-2 Environment " (OSFJAVA440)
Configuring "Netscape Communicator V4.5 " (OSFNETSCAPE440)
Configuring "Base System Management Applications and Utilities" (OSFSYSMAN440)
Configuring "Basic Networking Configuration Applications" (OSFNETCONF440)
Configuring "NFS(tm) Configuration Application " (OSFNFSCONF440)
Configuring "Graphical Base System Management Utilities" (OSFXSYSMAN440)
Configuring "Graphical System Administration Utilities" (OSFXADMIN440)
Configuring "Graphical Print Configuration Application" (OSFXPRINT440)
Configuring "Insight Manager " (OSFIMXE440)
The system name assigned to your machine is 'mysystem'.
The system will now automatically build a kernel
and then reboot. This will take approximately 15
minutes, depending on the processor type.
When the login prompt appears after the system
has rebooted, use 'root' as the login name and
the SUPERUSER password that was entered during
this procedure, to log into the system.
*** PERFORMING KERNEL BUILD ***
Working....Tue Jan 26 15:06:06 EST 1999
Working....Tue Jan 26 15:08:07 EST 1999
syncing disks... done
rebooting.... (transferring to monitor)
This section shows a sample text-based custom installation from a a remote installation
services (RIS) server named
serveris
using a network interface
with console device name
ez0.
Use this sample to follow the progress
of your own custom installation.
>>>boot ez0INIT-S-CPU... INIT-S-RESET_TC... INIT-S-ASIC... INIT-S-MEM... INIT-S-NVR... INIT-S-SCC... INIT-S-NI... INIT-S-SCSI... INIT-S-ISDN... INIT-S-TC0... AUDIT_BOOT_STARTS ... AUDIT_BOOT_REQ Host server IP address is 16.69.224.75 AUDIT_BSERVER_FOUND AUDIT_LOAD_BEGINS .......................................................... AUDIT_LOAD_DONE Secondary boot program - Thu Jan 14 15:58:08 EST 1999 Loading vmunix ... Loading at 0xffffffff00000000 Current PAL Revision <0x10538> Switching to OSF PALcode Succeeded New PAL Revision <0x2012d> Mapping Image Address Space Mapping complete Sizes: text = 5808144 data = 1769136 bss = 3424400 Starting at 0xffffffff00210890 Broadcasting BOOTP Request Alpha boot: available memory from 0xe08000 to 0x4000000 Digital UNIX X4.0F-4 (Rev. 1180); Thu Jan 14 16:04:52 EST 1999 physical memory = 64.00 megabytes. available memory = 50.67 megabytes. using 79 buffers containing 0.61 megabytes of memory emx: dynamic addressing enabled tc0 at nexus scc0 at tc0 slot 7 tcds0 at tc0 slot 6 scsi0 at tcds0 slot 0 rz1 at scsi0 target 1 lun 0 (LID=0) (DEC RZ26 (C) DEC T392) rz3 at scsi0 target 3 lun 0 (LID=1) (DEC RZ26 (C) DEC T386) rz4 at scsi0 target 4 lun 0 (LID=2) (DEC RRD42 (C) DEC 4.5d) scsi1 at tcds0 slot 1 rz9 at scsi1 target 1 lun 0 (LID=3) (DEC RZ26 (C) DEC 392A) tz13 at scsi1 target 5 lun 0 (LID=4) (DEC TLZ06 (C)DEC 0374) ln0: DEC LANCE Module Name: PMAD-BA ln0 at tc0 slot 7 ln0: DEC LANCE Ethernet Interface, hardware address: 08-00-2B-39-CA-C0 fb0 at tc0 slot 0 1280X1024 DEC 3000 - M400 system Firmware revision: 7.0 PALcode: Digital UNIX version 1.45 Booted from Network Interface (BOOTP 0 7 0 0 0 2 CORE-IO 08-00-2B-39-CA-C0 1) netblk.cliipadr 1045e0c5 hostname: mysystem vm_swap_init: warning /sbin/swapdefault swap device not found vm_swap_init: swap is set to lazy (over commitment) mode INIT: SINGLE-USER MODE Initializing system for Digital UNIX installation. Please wait... *** Performing RIS Installation from serveris Loading installation process and scanning system hardware. Welcome to the DIGITAL UNIX Installation Procedure This procedure installs DIGITAL UNIX onto your system. You will be asked a series of system configuration questions. Until you answer all questions, your system is not changed in any way. During the question and answer session, you can go back to any previous question and change your answer by entering: history You can get more information about a question by entering: help There are two types of installations: o The Default Installation installs a mandatory set of software subsets on a predetermined file system layout. o The Custom Installation installs a mandatory set of software subsets plus optional software subsets that you select. You can customize the file system layout. The UNIX Shell option puts your system in single-user mode with superuser privileges. This option is provided for experienced UNIX system administrators who want to perform file system or <Press RETURN for more>: disk maintenance tasks before the installation. The Installation Guide contains more information about installing DIGITAL UNIX. 1) Default Installation 2) Custom Installation 3) UNIX Shell Enter your choice:2Hostname "mysystem" has been assigned to this system. Enter a password to use as the root (superuser) password. Be sure to remember this password, because it is needed to log in as the user "root" following installation. Enter root password: password Retype root password: password Location and time zone have been set from server: US/Eastern System clock has been set via network: Tue Jan 26 15:55:04 EST 1999 Select a disk for DIGITAL UNIX installation. The root file system will be placed on the "a" partition of this disk. Disk Device Device Controller Controller Type Name Number Name Number 1) RZ26 rz1 1 SCSI 0 2) RZ26 rz3 3 SCSI 0 3) RZ26 rz9 9 SCSI 1 Enter your choice:1The rz1 disk has a partition table that is not recommended. Partition Start Size End Overlaps Recommended a 0 262144 262143 c b 262144 262144 524287 c c 0 2050860 2050859 a b d e f g d 524288 508857 1033144 c g e 1033145 508857 1542001 c g f 1542002 508858 2050859 c g g 524288 1526572 2050859 c d e f h 0 0 -1 Existing a 0 131072 131071 c b 131072 262144 393215 c c 0 2050860 2050859 a b d e f g h d 393216 552548 945763 c g e 945764 552548 1498311 c g h f 1498312 552548 2050859 c h g 393216 819200 1212415 c d e h 1212416 838444 2050859 c e f Choose which partition table to use. 1) Recommended table 2) Existing table Enter your choice:1The default disk layout is: * root file system on the "a" partition, type UFS * /usr file system on the "g" partition, type UFS * /var as part of /usr * first swapping area (swap1) on the "b" partition * no second swapping area (swap2) Use this default disk layout (y/n) ? y root will use file system type UFS. /usr will be on partition g of disk rz1 /usr will use file system type UFS. swap1 will be on partition b of disk rz1 Because this is the default disk layout, no secondary swap area (swap2) will be created. Because this is the default disk layout, /var will be on /usr. ** Reviewing available software subsets. Please wait ... The following subsets are mandatory and will be installed automatically unless you choose to exit without installing any subsets: * Base System * Base System - Hardware Support * Base System Management Applications and Utilities <Press RETURN for more>: * Basic Networking Configuration Applications * Basic Networking Services * Basic X Environment * CDE Desktop Environment * CDE Mail Interface * CDE Minimum Runtime Environment * Compiler Back End * DECwindows 100dpi Fonts * Graphical Base System Management Utilities * Graphical Print Configuration Application * Graphical System Administration Utilities * Hardware Kernel Header and Common Files * Hardware Kernel Modules * Insight Manager * Java 1.1.7B-2 Environment * Kernel Header and Common Files * LK401 Keyboard Support * Local Printer Support * Logical Storage Manager Kernel Header and Common Files * Logical Storage Manager Kernel Modules * NFS(tm) Configuration Application * NFS(tm) Utilities * Netscape Communicator V4.5 <Press RETURN for more>: * Old X Environment * POLYCTR advfs Kernel Modules * Standard Kernel Modules * Tcl Commands * Tk Toolkit Commands * X Fonts * X Servers Base * X Servers for TurboChannel Free space remaining after mandatory subsets (root/usr): 67.8 MB/491 MB
This section lists the optional software subsets that are available for a custom installation regardless of the interface (text-based or graphical) you are using.
Optional subsets are listed below. There may be more optional subsets than can be presented on a single screen. If this is the case, you can choose subsets screen by screen, or all at once on the last screen. All of the choices you make will be collected for your confirmation before any subsets are installed. - General Applications: 1) Additional Terminfo databases 2) Computer Aided System Tutor Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 67.8 MB/491 MB Choices (for example, 1 2 4-6):historySelect the question you wish to re-visit. 1) Installation type ( 1 ) 2) Set root password ( encryption ) 3) Confirm root password ( encryption ) 4) Select root disk ( rz1 ) 5) Select partition table for root disk ( recommended ) 6) Use default disk layout? ( 1 ) 7) DISMISS history menu Enter your choice:6The default disk layout is: * root file system on the "a" partition, type UFS * /usr file system on the "g" partition, type UFS * /var as part of /usr * first swapping area (swap1) on the "b" partition * no second swapping area (swap2) Use this default disk layout (y/n) ?nSelect the file system type for the root file system. 1) UFS -- UNIX file system 2) AdvFS -- advanced file system Enter your choice:2Select the disk where the /usr file system will reside. Disk Device Device Controller Controller Type Name Number Name Number 1) RZ26 rz1 1 SCSI 0 2) RZ26 rz3 3 SCSI 0 3) RZ26 rz9 9 SCSI 1 Enter your choice:1Select the rz1 partition where the /usr file system will reside. Partition Start Size End Overlaps 1) b 262144 262144 524287 c 2) d 524288 508857 1033144 c g 3) e 1033145 508857 1542001 c g 4) f 1542002 508858 2050859 c g 5) g 524288 1526572 2050859 c d e f Enter your choice:gSelect the file system type for the /usr file system. 1) UFS -- UNIX file system 2) AdvFS -- advanced file system Enter your choice:2Select the disk where the first swapping area (swap1) will reside. Disk Device Device Controller Controller Type Name Number Name Number 1) RZ26 rz1 1 SCSI 0 2) RZ26 rz3 3 SCSI 0 3) RZ26 rz9 9 SCSI 1 Enter your choice:1swap1 will be on the "b" partition of disk rz1 because all of its other partitions are already in use. You may choose to have a second swapping area (swap2). Do you want a second swapping area (y/n) ?ySelect the disk where the second swapping area (swap2) will reside. Disk Device Device Controller Controller Type Name Number Name Number 1) RZ26 rz3 3 SCSI 0 2) RZ26 rz9 9 SCSI 1 Enter your choice:1Select the rz3 partition where the second swapping area (swap2) will reside. Partition Start Size End Overlaps 1) a 0 262144 262143 c 2) b 262144 262144 524287 c 3) c 0 2050860 2050859 a b d e f g 4) d 524288 508857 1033144 c g 5) e 1033145 508857 1542001 c g 6) f 1542002 508858 2050859 c g 7) g 524288 1526572 2050859 c d e f Enter your choice:bYou can make /var a separate file system, or you can have it share space on the /usr file system. Should /var be a separate file system (y/n) ?nYou have requested this file system layout: * root file system on rz1a, type AdvFS * /usr file system on rz1g, type AdvFS * /var will be on /usr * first swapping area (swap1) will be on rz1b * second swapping area (swap2) will be on rz3b Is this the correct file system layout (y/n) ?y** Reviewing available software subsets. Please wait ... The following subsets are mandatory and will be installed automatically unless you choose to exit without installing any subsets: * Base System * Base System - Hardware Support * Base System Management Applications and Utilities * Basic Networking Configuration Applications * Basic Networking Services * Basic X Environment * CDE Desktop Environment * CDE Mail Interface * CDE Minimum Runtime Environment * Compiler Back End * DECwindows 100dpi Fonts * Graphical Base System Management Utilities * Graphical Print Configuration Application * Graphical System Administration Utilities * Hardware Kernel Header and Common Files * Hardware Kernel Modules <Press RETURN for more>: [Return] * Insight Manager * Java 1.1.7B-2 Environment * Kernel Header and Common Files * LK401 Keyboard Support * Local Printer Support * Logical Storage Manager Kernel Header and Common Files * Logical Storage Manager Kernel Modules * NFS(tm) Configuration Application * NFS(tm) Utilities * Netscape Communicator V4.5 * Old X Environment * POLYCTR advfs * POLYCTR advfs Kernel Modules * Standard Kernel Modules * Tcl Commands * Tk Toolkit Commands * X Fonts * X Servers Base * X Servers for TurboChannel Free space remaining after mandatory subsets (root/usr): 65.2 MB/488 MB Optional subsets are listed below. There may be more optional <Press RETURN for more>: [Return] subsets than can be presented on a single screen. If this is the case, you can choose subsets screen by screen, or all at once on the last screen. All of the choices you make will be collected for your confirmation before any subsets are installed. - General Applications: 1) Additional Terminfo databases 2) Computer Aided System Tutor 3) DOS tools 4) GNU Emacs 5) Local Area Transport (LAT) 6) UNIX(tm) SVID2 Compatibility 7) UNIX(tm) to UNIX(tm) Copy Facility - Kernel Build Environment: 8) ATM Kernel Header and Common Files 9) ATM Kernel Modules - Mail Applications: 10) DECwindows Mail Interface Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6): [Return] 11) RAND Corp. Mail Handler (MH) - Network-Server/Communications: 12) ATM Commands 13) Additional Networking Services 14) Dataless Management Services 15) Remote Installation Service - Printing Environment: 16) Adobe Font Metric Files - Reference Pages: 17) Ref Pages: Admin/User 18) Ref Pages: CDE Admin/User 19) Ref Pages: CDE Development 20) Ref Pages: Programming 21) Ref Pages: Windows Admin/User 22) Ref Pages: Windows Programming - Software Development: Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6): [Return] 23) CDA(tm) Software Development 24) CDA(tm) for X/Motif Development 25) CDE Software Development and Programming Examples 26) GNU Revision Control System 27) Ladebug Debugger Version 4.0-49 28) Ladebug Debugger Version 4.0-49 Release Notes 29) Ladebug Debugger graphical user interface 30) Ladebug Debugger remote server 31) Programming Examples 32) Software Development Desktop Environment 33) Software Development Tools and Utilities 34) Source Code Control System 35) Standard Header Files 36) Standard Programmer Commands 37) Static Libraries 38) X Window and X/Motif Header Files 39) X Window and X/Motif Programming Examples 40) X Window and X/Motif Software Development 41) X Window and X/Motif Static Libraries Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6): [Return] - Supplemental Documentation: 42) XIE Version 5 Online Documentation - System Administration: 43) C2-Security 44) C2-Security GUI 45) Environmental Monitoring 46) Kernel Debugging Tools 47) Logical Storage Manager 48) Logical Storage Manager GUI 49) Logical Volume Manager 50) Obsolete Commands and Utilities 51) Obsolete Locale databases 52) Single-Byte European Locales 53) System Accounting Utilities 54) System Exercisers - Text Processing: 55) Doc. Preparation Tools 56) Doc. Preparation Tools Extensions Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6): [Return] - Windowing Environment: 57) DECwindows 75dpi Fonts 58) LK201 Keyboard Support 59) LK411 Keyboard Support 60) LK421 Keyboard Support 61) LK444 Keyboard Support 62) PCXAL Keyboard Support 63) X Customizations for OEM 64) X Servers for Open3D 65) X Servers for PCbus 66) X/Motif 1.1 - Windows Applications: 67) Additional DECwindows Applications 68) Additional X Applications 69) CDE Additional Applications 70) Demo X Applications 71) Nested X Server 72) Old Additional DECwindows Applications Add to your choices, or press RETURN for next page. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6): [Return] 73) Virtual X Frame Buffer The following choices override your previous selections: 74) ALL mandatory and all optional subsets 75) MANDATORY subsets only 76) CANCEL selections and redisplay menus Add to your choices, or press RETURN to confirm previous choices. Free space remaining (root/usr): 65.2 MB/488 MB Choices (for example, 1 2 4-6):74The following subsets will be loaded: * System Accounting Utilities * POLYCTR advfs * POLYCTR advfs Kernel Modules * Adobe Font Metric Files * ATM Commands * ATM Kernel Modules * ATM Kernel Header and Common Files * Base System * Standard Kernel Modules * Kernel Header and Common Files * C2-Security * CDA(tm) Software Development * CDE Additional Applications * CDE Software Development and Programming Examples * CDE Desktop Environment * CDE Mail Interface * Ref Pages: CDE Development * Ref Pages: CDE Admin/User * CDE Minimum Runtime Environment <Press RETURN for more>: [Return] * Basic Networking Services * Compiler Back End * Obsolete Locale databases * Doc. Preparation Tools * Doc. Preparation Tools Extensions * Additional DECwindows Applications * Dataless Management Services * DOS tools * GNU Emacs * Environmental Monitoring * Single-Byte European Locales * Programming Examples * System Exercisers * DECwindows 100dpi Fonts * DECwindows 75dpi Fonts * Base System - Hardware Support * Hardware Kernel Modules * Hardware Kernel Header and Common Files * Insight Manager * Standard Header Files * Additional Networking Services * Java 1.1.7B-2 Environment * LK201 Keyboard Support <Press RETURN for more>: [Return] * LK401 Keyboard Support * LK411 Keyboard Support * LK421 Keyboard Support * LK444 Keyboard Support * PCXAL Keyboard Support * Kernel Debugging Tools * Local Area Transport (LAT) * Ladebug Debugger Version 4.0-49 * Ladebug Debugger Version 4.0-49 Release Notes * Ladebug Debugger graphical user interface * Ladebug Debugger remote server * Computer Aided System Tutor * Static Libraries * Logical Storage Manager * Logical Storage Manager Kernel Modules * Logical Storage Manager Kernel Header and Common Files * Logical Storage Manager GUI * Logical Volume Manager * Ref Pages: Programming * Ref Pages: Admin/User * Ref Pages: Windows Programming * Ref Pages: Windows Admin/User * RAND Corp. Mail Handler (MH) <Press RETURN for more>: [Return] * X Fonts * X/Motif 1.1 * Basic Networking Configuration Applications * Netscape Communicator V4.5 * NFS(tm) Utilities * NFS(tm) Configuration Application * Obsolete Commands and Utilities * Old Additional DECwindows Applications * Old X Environment * Standard Programmer Commands * Local Printer Support * GNU Revision Control System * Remote Installation Service * Source Code Control System * Software Development Tools and Utilities * Software Development Desktop Environment * X Servers for Open3D * X Servers Base * X Servers for PCbus * X Servers for TurboChannel * UNIX(tm) SVID2 Compatibility * Base System Management Applications and Utilities * Tcl Commands <Press RETURN for more>: [Return] * Additional Terminfo databases * Tk Toolkit Commands * UNIX(tm) to UNIX(tm) Copy Facility * Basic X Environment * Graphical System Administration Utilities * C2-Security GUI * CDA(tm) for X/Motif Development * Demo X Applications * X Window and X/Motif Software Development * X Window and X/Motif Programming Examples * XIE Version 5 Online Documentation * X Window and X/Motif Header Files * X Window and X/Motif Static Libraries * DECwindows Mail Interface * Additional X Applications * Nested X Server * X Customizations for OEM * Graphical Print Configuration Application * Graphical Base System Management Utilities * Virtual X Frame Buffer Are these the subsets that should be loaded (y/n) ?y
This section shows file system creation and software subset loading.
You have now answered all questions needed to install
DIGITAL UNIX on this system. Press CTRL/C to cancel the
installation; or type "history" to modify your earlier
answers; or press RETURN to proceed with installation: [Return]
Continuing installation...
*** Creating the root file system on device rz1a ***
ADVFS: using 566 buffers containing 4.42 megabytes of memory
*** Creating the usr file system on device rz1g ***
*** Creating the swap1 file system on device rz1b ***
*** Creating the swap2 file system on device rz3b ***
*** Loading the operating system software subsets ***
The installation procedure will now load the software on your
disk partitions. This process will take from 45 to 120 minutes
to complete depending on your distribution media and processor type.
Checking file system space required to install specified subsets:
Working....Tue Jan 26 16:03:04 EST 1999
File system space checked OK.
108 subset(s) will be installed.
Loading 1 of 108 subset(s)....
Base System
Copying from serveris (inet)
Working....Tue Jan 26 16:04:18 EST 1999
Verifying
Working....Tue Jan 26 16:06:00 EST 1999
Loading 2 of 108 subset(s)....
Base System - Hardware Support
Copying from serveris (inet)
Working....Tue Jan 26 16:06:32 EST 1999
Verifying
Loading 3 of 108 subset(s)....
Compiler Back End
Copying from serveris (inet)
Working....Tue Jan 26 16:07:11 EST 1999
Verifying
Loading 4 of 108 subset(s)....
Kernel Header and Common Files
Copying from serveris (inet)
Working....Tue Jan 26 16:07:44 EST 1999
Verifying
Working....Tue Jan 26 16:08:33 EST 1999
Loading 5 of 108 subset(s)....
Standard Kernel Modules
Copying from serveris (inet)
Working....Tue Jan 26 16:08:47 EST 1999
Broken pipe
Verifying
Loading 6 of 108 subset(s)....
Hardware Kernel Header and Common Files
Copying from serveris (inet)
Broken pipe
Verifying
Loading 7 of 108 subset(s)....
Hardware Kernel Modules
Copying from serveris (inet)
Working....Tue Jan 26 16:09:24 EST 1999
Verifying
Loading 8 of 108 subset(s)....
ATM Kernel Header and Common Files
Copying from serveris (inet)
Verifying
Loading 9 of 108 subset(s)....
ATM Kernel Modules
Copying from serveris (inet)
Verifying
Loading 10 of 108 subset(s)....
Logical Storage Manager Kernel Header and Common Files
Copying from serveris (inet)
Verifying
Loading 11 of 108 subset(s)....
Logical Storage Manager Kernel Modules
Copying from serveris (inet)
Broken pipe
Verifying
Loading 12 of 108 subset(s)....
POLYCTR advfs Kernel Modules
Copying from serveris (inet)
Verifying
Loading 13 of 108 subset(s)....
Tcl Commands
Copying from serveris (inet)
Broken pipe
Verifying
Loading 14 of 108 subset(s)....
Basic Networking Services
Copying from serveris (inet)
Working....Tue Jan 26 16:11:14 EST 1999
Verifying
Loading 15 of 108 subset(s)....
Additional Networking Services
Copying from serveris (inet)
Working....Tue Jan 26 16:11:43 EST 1999
Verifying
Loading 16 of 108 subset(s)....
ATM Commands
Copying from serveris (inet)
Verifying
Loading 17 of 108 subset(s)....
Logical Storage Manager
Copying from serveris (inet)
Working....Tue Jan 26 16:12:15 EST 1999
Verifying
Loading 18 of 108 subset(s)....
POLYCTR advfs
Copying from serveris (inet)
Working....Tue Jan 26 16:12:31 EST 1999
Broken pipe
Verifying
Loading 19 of 108 subset(s)....
NFS(tm) Utilities
Copying from serveris (inet)
Broken pipe
Verifying
Loading 20 of 108 subset(s)....
Remote Installation Service
Copying from serveris (inet)
Broken pipe
Verifying
Loading 21 of 108 subset(s)....
Dataless Management Services
Copying from serveris (inet)
Verifying
Loading 22 of 108 subset(s)....
Local Printer Support
Copying from serveris (inet)
Verifying
Loading 23 of 108 subset(s)....
Adobe Font Metric Files
Copying from serveris (inet)
Broken pipe
Verifying
Loading 24 of 108 subset(s)....
Doc. Preparation Tools
Copying from serveris (inet)
Broken pipe
Verifying
Loading 25 of 108 subset(s)....
Doc. Preparation Tools Extensions
Copying from serveris (inet)
Verifying
Loading 26 of 108 subset(s)....
Basic X Environment
Copying from serveris (inet)
Working....Tue Jan 26 16:13:54 EST 1999
Verifying
Working....Tue Jan 26 16:14:44 EST 1999
Loading 27 of 108 subset(s)....
CDE Minimum Runtime Environment
Copying from serveris (inet)
Working....Tue Jan 26 16:14:58 EST 1999
Verifying
Loading 28 of 108 subset(s)....
CDE Desktop Environment
Copying from serveris (inet)
Working....Tue Jan 26 16:15:23 EST 1999
Verifying
Working....Tue Jan 26 16:16:57 EST 1999
Loading 29 of 108 subset(s)....
X Servers Base
Copying from serveris (inet)
Working....Tue Jan 26 16:17:17 EST 1999
Verifying
Loading 30 of 108 subset(s)....
X Servers for PCbus
Copying from serveris (inet)
Verifying
Loading 31 of 108 subset(s)....
X Servers for TurboChannel
Copying from serveris (inet)
Verifying
Loading 32 of 108 subset(s)....
X Servers for Open3D
Copying from serveris (inet)
Working....Tue Jan 26 16:17:56 EST 1999
Verifying
Loading 33 of 108 subset(s)....
X Fonts
Copying from serveris (inet)
Working....Tue Jan 26 16:18:16 EST 1999
Verifying
Loading 34 of 108 subset(s)....
DECwindows 100dpi Fonts
Copying from serveris (inet)
Broken pipe
Verifying
Loading 35 of 108 subset(s)....
DECwindows 75dpi Fonts
Copying from serveris (inet)
Verifying
Loading 36 of 108 subset(s)....
LK201 Keyboard Support
Copying from serveris (inet)
Verifying
Loading 37 of 108 subset(s)....
LK401 Keyboard Support
Copying from serveris (inet)
Verifying
Loading 38 of 108 subset(s)....
LK411 Keyboard Support
Copying from serveris (inet)
Verifying
Loading 39 of 108 subset(s)....
LK421 Keyboard Support
Copying from serveris (inet)
Verifying
Loading 40 of 108 subset(s)....
LK444 Keyboard Support
Copying from serveris (inet)
Verifying
Loading 41 of 108 subset(s)....
PCXAL Keyboard Support
Copying from serveris (inet)
Verifying
Loading 42 of 108 subset(s)....
X Customizations for OEM
Copying from serveris (inet)
Broken pipe
Verifying
Loading 43 of 108 subset(s)....
Old X Environment
Copying from serveris (inet)
Verifying
Loading 44 of 108 subset(s)....
RAND Corp. Mail Handler (MH)
Copying from serveris (inet)
Verifying
Loading 45 of 108 subset(s)....
CDE Mail Interface
Copying from serveris (inet)
Verifying
Loading 46 of 108 subset(s)....
DECwindows Mail Interface
Copying from serveris (inet)
Broken pipe
Verifying
Loading 47 of 108 subset(s)....
UNIX(tm) SVID2 Compatibility
Copying from serveris (inet)
Verifying
Loading 48 of 108 subset(s)....
DOS tools
Copying from serveris (inet)
Broken pipe
Verifying
Loading 49 of 108 subset(s)....
Local Area Transport (LAT)
Copying from serveris (inet)
Verifying
Loading 50 of 108 subset(s)....
UNIX(tm) to UNIX(tm) Copy Facility
Copying from serveris (inet)
Working....Tue Jan 26 16:21:21 EST 1999
Verifying
Loading 51 of 108 subset(s)....
Computer Aided System Tutor
Copying from serveris (inet)
Working....Tue Jan 26 16:21:43 EST 1999
Verifying
Loading 52 of 108 subset(s)....
Additional Terminfo databases
Copying from serveris (inet)
Working....Tue Jan 26 16:22:00 EST 1999
Verifying
Loading 53 of 108 subset(s)....
GNU Emacs
Copying from serveris (inet)
Working....Tue Jan 26 16:22:17 EST 1999
Verifying
Working....Tue Jan 26 16:23:06 EST 1999
Loading 54 of 108 subset(s)....
Tk Toolkit Commands
Copying from serveris (inet)
Verifying
Loading 55 of 108 subset(s)....
Java 1.1.7B-2 Environment
Copying from serveris (inet)
Working....Tue Jan 26 16:23:34 EST 1999
Verifying
Loading 56 of 108 subset(s)....
Additional X Applications
Copying from serveris (inet)
Verifying
Loading 57 of 108 subset(s)....
Nested X Server
Copying from serveris (inet)
Verifying
Loading 58 of 108 subset(s)....
Virtual X Frame Buffer
Copying from serveris (inet)
Broken pipe
Verifying
Loading 59 of 108 subset(s)....
Demo X Applications
Copying from serveris (inet)
Verifying
Loading 60 of 108 subset(s)....
CDE Additional Applications
Copying from serveris (inet)
Working....Tue Jan 26 16:24:41 EST 1999
Verifying
Loading 61 of 108 subset(s)....
Additional DECwindows Applications
Copying from serveris (inet)
Verifying
Loading 62 of 108 subset(s)....
Netscape Communicator V4.5
Copying from serveris (inet)
Working....Tue Jan 26 16:25:11 EST 1999
Verifying
Loading 63 of 108 subset(s)....
Old Additional DECwindows Applications
Copying from serveris (inet)
Working....Tue Jan 26 16:26:21 EST 1999
Verifying
Loading 64 of 108 subset(s)....
System Accounting Utilities
Copying from serveris (inet)
Verifying
Loading 65 of 108 subset(s)....
Logical Volume Manager
Copying from serveris (inet)
Broken pipe
Verifying
Loading 66 of 108 subset(s)....
System Exercisers
Copying from serveris (inet)
Broken pipe
Verifying
Loading 67 of 108 subset(s)....
Single-Byte European Locales
Copying from serveris (inet)
Verifying
Loading 68 of 108 subset(s)....
C2-Security
Copying from serveris (inet)
Verifying
Loading 69 of 108 subset(s)....
Kernel Debugging Tools
Copying from serveris (inet)
Working....Tue Jan 26 16:27:30 EST 1999
Verifying
Loading 70 of 108 subset(s)....
Base System Management Applications and Utilities
Copying from serveris (inet)
Working....Tue Jan 26 16:27:46 EST 1999
Broken pipe
Verifying
Loading 71 of 108 subset(s)....
Basic Networking Configuration Applications
Copying from serveris (inet)
Verifying
Loading 72 of 108 subset(s)....
NFS(tm) Configuration Application
Copying from serveris (inet)
Broken pipe
Verifying
Loading 73 of 108 subset(s)....
Graphical Base System Management Utilities
Copying from serveris (inet)
Working....Tue Jan 26 16:28:33 EST 1999
Verifying
Loading 74 of 108 subset(s)....
Environmental Monitoring
Copying from serveris (inet)
Verifying
Loading 75 of 108 subset(s)....
Graphical System Administration Utilities
Copying from serveris (inet)
Working....Tue Jan 26 16:29:08 EST 1999
Verifying
Loading 76 of 108 subset(s)....
Graphical Print Configuration Application
Copying from serveris (inet)
Verifying
Loading 77 of 108 subset(s)....
Insight Manager
Copying from serveris (inet)
Working....Tue Jan 26 16:29:33 EST 1999
Verifying
Loading 78 of 108 subset(s)....
C2-Security GUI
Copying from serveris (inet)
Verifying
Loading 79 of 108 subset(s)....
Logical Storage Manager GUI
Copying from serveris (inet)
Verifying
Loading 80 of 108 subset(s)....
GNU Revision Control System
Copying from serveris (inet)
Verifying
Loading 81 of 108 subset(s)....
Source Code Control System
Copying from serveris (inet)
Working....Tue Jan 26 16:30:18 EST 1999
Verifying
Loading 82 of 108 subset(s)....
Software Development Tools and Utilities
Copying from serveris (inet)
Working....Tue Jan 26 16:30:36 EST 1999
Broken pipe
Verifying
Loading 83 of 108 subset(s)....
Standard Programmer Commands
Copying from serveris (inet)
Working....Tue Jan 26 16:31:00 EST 1999
Broken pipe
Verifying
Loading 84 of 108 subset(s)....
Standard Header Files
Copying from serveris (inet)
Working....Tue Jan 26 16:31:16 EST 1999
Verifying
Loading 85 of 108 subset(s)....
Static Libraries
Copying from serveris (inet)
Working....Tue Jan 26 16:31:33 EST 1999
Broken pipe
Verifying
Loading 86 of 108 subset(s)....
X Window and X/Motif Software Development
Copying from serveris (inet)
Broken pipe
Verifying
Loading 87 of 108 subset(s)....
X Window and X/Motif Header Files
Copying from serveris (inet)
Working....Tue Jan 26 16:32:01 EST 1999
Verifying
Loading 88 of 108 subset(s)....
X Window and X/Motif Static Libraries
Copying from serveris (inet)
Working....Tue Jan 26 16:32:21 EST 1999
Broken pipe
Verifying
Loading 89 of 108 subset(s)....
CDE Software Development and Programming Examples
Copying from serveris (inet)
Working....Tue Jan 26 16:32:47 EST 1999
Verifying
Loading 90 of 108 subset(s)....
CDA(tm) Software Development
Copying from serveris (inet)
Verifying
Loading 91 of 108 subset(s)....
CDA(tm) for X/Motif Development
Copying from serveris (inet)
Verifying
Loading 92 of 108 subset(s)....
Software Development Desktop Environment
Copying from serveris (inet)
Verifying
Loading 93 of 108 subset(s)....
Ladebug Debugger Version 4.0-49
Copying from serveris (inet)
Working....Tue Jan 26 16:33:52 EST 1999
Broken pipe
Verifying
Loading 94 of 108 subset(s)....
Ladebug Debugger Version 4.0-49 Release Notes
Copying from serveris (inet)
Broken pipe
Verifying
Loading 95 of 108 subset(s)....
Ladebug Debugger graphical user interface
Copying from serveris (inet)
Verifying
Loading 96 of 108 subset(s)....
Ladebug Debugger remote server
Copying from serveris (inet)
Broken pipe
Verifying
Loading 97 of 108 subset(s)....
Programming Examples
Copying from serveris (inet)
Verifying
Loading 98 of 108 subset(s)....
X Window and X/Motif Programming Examples
Copying from serveris (inet)
Working....Tue Jan 26 16:34:50 EST 1999
Broken pipe
Verifying
Loading 99 of 108 subset(s)....
Obsolete Locale databases
Copying from serveris (inet)
Verifying
Loading 100 of 108 subset(s)....
Obsolete Commands and Utilities
Copying from serveris (inet)
Verifying
Loading 101 of 108 subset(s)....
X/Motif 1.1
Copying from serveris (inet)
Working....Tue Jan 26 16:35:29 EST 1999
Broken pipe
Verifying
Loading 102 of 108 subset(s)....
Ref Pages: Admin/User
Copying from serveris (inet)
Working....Tue Jan 26 16:35:51 EST 1999
Verifying
Loading 103 of 108 subset(s)....
Ref Pages: Windows Admin/User
Copying from serveris (inet)
Verifying
Loading 104 of 108 subset(s)....
Ref Pages: CDE Admin/User
Copying from serveris (inet)
Verifying
Loading 105 of 108 subset(s)....
Ref Pages: Programming
Copying from serveris (inet)
Working....Tue Jan 26 16:37:07 EST 1999
Verifying
Loading 106 of 108 subset(s)....
Ref Pages: Windows Programming
Copying from serveris (inet)
Working....Tue Jan 26 16:37:53 EST 1999
Verifying
Loading 107 of 108 subset(s)....
Ref Pages: CDE Development
Copying from serveris (inet)
Verifying
Loading 108 of 108 subset(s)....
XIE Version 5 Online Documentation
Copying from serveris (inet)
Broken pipe
Verifying
108 of 108 subset(s) installed successfully.
The installation software has successfully installed your system.
There are logfiles that contain a record of your installation.
These are:
/var/adm/smlogs/install.cdf - configuration description file
/var/adm/smlogs/install.log - general log file
/var/adm/smlogs/install.FS.log - file system creation logs
/var/adm/smlogs/setld.log - log for the setld(8) utility
/var/adm/smlogs/fverify.log - verification log file
The above message is also recorded in /etc/motd for your
future reference.
Issue the following console commands to set your default bootpath variable
and to boot your system disk to multiuser:
>>> set boot_osflags A
>>> set bootdef_dev DKA100
>>> boot
syncing disks... done
CPU 0: Halting... (transferring to monitor)
?05 HLT INSTR
PC= FFFFFFFF.00212520 PSL= 00000000.00000005
>>> set boot_osflags A
BOOT_OSFLAGS = A
>>> set bootdef_dev DKA100
BOOTDEF_DEV = DKA100
>>> boot
System initialization messages display as the system boots from the newly-installed system. Software configuration begins next:
*** SYSTEM CONFIGURATION *** Configuring "Base System " (OSFBASE440) Configuring "Base System - Hardware Support " (OSFHWBASE440) Configuring "Compiler Back End " (OSFCMPLRS440) Configuring "Kernel Header and Common Files " (OSFBINCOM440) Configuring "Standard Kernel Modules " (OSFBIN440) Configuring "Hardware Kernel Header and Common Files" (OSFHWBINCOM440) Configuring "Hardware Kernel Modules " (OSFHWBIN440) Configuring "ATM Kernel Header and Common Files " (OSFATMBINCOM440) Configuring "ATM Kernel Modules " (OSFATMBIN440) Configuring "Logical Storage Manager Kernel Header and Common Files" (OSFLSMBINCOM440) Configuring "Logical Storage Manager Kernel Modules" (OSFLSMBIN440) Configuring "POLYCTR advfs Kernel Modules " (OSFADVFSBIN440) Configuring "Tcl Commands " (OSFTCLBASE440) Configuring "Basic Networking Services " (OSFCLINET440) Configuring "Additional Networking Services " (OSFINET440) Configuring "ATM Commands " (OSFATMBASE440) Configuring "Logical Storage Manager " (OSFLSMBASE440) Configuring "POLYCTR advfs " (OSFADVFS440) Configuring "NFS(tm) Utilities " (OSFNFS440) Configuring "Remote Installation Service " (OSFRIS440) Configuring "Dataless Management Services " (OSFDMS440) Configuring "Local Printer Support " (OSFPRINT440) Configuring "Adobe Font Metric Files " (OSFAFM440) Configuring "Doc. Preparation Tools " (OSFDCMT440) Configuring "Doc. Preparation Tools Extensions " (OSFDCMTEXT440) Configuring "Basic X Environment " (OSFX11440) Configuring "CDE Minimum Runtime Environment " (OSFCDEMIN440) Configuring "CDE Desktop Environment " (OSFCDEDT440) Configuring "X Servers Base " (OSFSER440) Configuring "X Servers for PCbus " (OSFSERPC440) Configuring "X Servers for TurboChannel " (OSFSERTC440) Configuring "X Servers for Open3D " (OSFSER3D440) Configuring "X Fonts " (OSFMITFONT440) Configuring "DECwindows 100dpi Fonts " (OSFFONT15440) Configuring "DECwindows 75dpi Fonts " (OSFFONT440) Configuring "LK201 Keyboard Support " (OSFKBDLK201440) Configuring "LK401 Keyboard Support " (OSFKBDLK401440) Configuring "LK411 Keyboard Support " (OSFKBDLK411440) Configuring "LK421 Keyboard Support " (OSFKBDLK421440) Configuring "LK444 Keyboard Support " (OSFKBDLK444440) Configuring "PCXAL Keyboard Support " (OSFKBDPCXAL440) Configuring "X Customizations for OEM " (OSFXOEM440) Configuring "Old X Environment " (OSFOLDX11440) Configuring "RAND Corp. Mail Handler (MH) " (OSFMH440) Configuring "CDE Mail Interface " (OSFCDEMAIL440) Configuring "DECwindows Mail Interface " (OSFXMAIL440) Configuring "UNIX(tm) SVID2 Compatibility " (OSFSVID2440) Configuring "DOS tools " (OSFDOSTOOLS440) Configuring "Local Area Transport (LAT) " (OSFLAT440) Configuring "UNIX(tm) to UNIX(tm) Copy Facility " (OSFUUCP440) Configuring "Computer Aided System Tutor " (OSFLEARN440) Configuring "Additional Terminfo databases " (OSFTERM440) Configuring "GNU Emacs " (OSFEMACS440) Configuring "Tk Toolkit Commands " (OSFTKBASE440) Configuring "Java 1.1.7B-2 Environment " (OSFJAVA440) Configuring "Additional X Applications " (OSFXMIT440) Configuring "Nested X Server " (OSFXNEST440) Configuring "Virtual X Frame Buffer " (OSFXVFB440) Configuring "Demo X Applications " (OSFXDEMOS440) Configuring "CDE Additional Applications " (OSFCDEAPPS440) Configuring "Additional DECwindows Applications " (OSFDECW440) Configuring "Netscape Communicator V4.5 " (OSFNETSCAPE440) Configuring "Old Additional DECwindows Applications" (OSFOLDDECW440) Configuring "System Accounting Utilities " (OSFACCT440) Configuring "Logical Volume Manager " (OSFLVM440) Configuring "System Exercisers " (OSFEXER440) Configuring "Single-Byte European Locales " (OSFEURLOC440) Configuring "C2-Security " (OSFC2SEC440) Configuring "Kernel Debugging Tools " (OSFKTOOLS440) Configuring "Base System Management Applications and Utilities" (OSFSYSMAN440) Configuring "Basic Networking Configuration Applications" (OSFNETCONF440) Configuring "NFS(tm) Configuration Application " (OSFNFSCONF440) Configuring "Graphical Base System Management Utilities" (OSFXSYSMAN440) Configuring "Environmental Monitoring " (OSFENVMON440) Configuring "Graphical System Administration Utilities" (OSFXADMIN440) Configuring "Graphical Print Configuration Application" (OSFXPRINT440) Configuring "Insight Manager " (OSFIMXE440) Configuring "C2-Security GUI " (OSFXC2SEC440) Configuring "Logical Storage Manager GUI " (OSFLSMX11440) Configuring "GNU Revision Control System " (OSFRCS440) Configuring "Source Code Control System " (OSFSCCS440) Configuring "Software Development Tools and Utilities" (OSFSDE440) Configuring "Standard Programmer Commands " (OSFPGMR440) Configuring "Standard Header Files " (OSFINCLUDE440) Configuring "Static Libraries " (OSFLIBA440) Configuring "X Window and X/Motif Software Development" (OSFXDEV440) Configuring "X Window and X/Motif Header Files " (OSFXINCLUDE440) Configuring "X Window and X/Motif Static Libraries" (OSFXLIBA440) Configuring "CDE Software Development and Programming Examples" (OSFCDEDEV440) Configuring "CDA(tm) Software Development " (OSFCDAPGMR440) Configuring "CDA(tm) for X/Motif Development " (OSFXCDADEV440) Configuring "Software Development Desktop Environment" (OSFSDECDE440) Configuring "Ladebug Debugger Version 4.0-49 " (OSFLDBBASE440) Configuring "Ladebug Debugger Version 4.0-49 Release Notes" (OSFLDBDOC440) Configuring "Ladebug Debugger graphical user interface" (OSFLDBGUI440) Configuring "Ladebug Debugger remote server " (OSFLDBSRV440) Configuring "Programming Examples " (OSFEXAMPLES440) Configuring "X Window and X/Motif Programming Examples" (OSFXEXAMPLES440) Configuring "Obsolete Locale databases " (OSFCTABLOC440) Configuring "Obsolete Commands and Utilities " (OSFOBSOLETE440) Configuring "X/Motif 1.1 " (OSFMOTIF11440) Configuring "Ref Pages: Admin/User " (OSFMANOS440) Configuring "Ref Pages: Windows Admin/User " (OSFMANWOS440) Configuring "Ref Pages: CDE Admin/User " (OSFCDEMANOS440) Configuring "Ref Pages: Programming " (OSFMANOP440) Configuring "Ref Pages: Windows Programming " (OSFMANWOP440) Configuring "Ref Pages: CDE Development " (OSFCDEMANOP440) Configuring "XIE Version 5 Online Documentation " (OSFXIEDOC440) The system name assigned to your machine is 'mysystem'.
This section shows the kernel build procedure.
*** KERNEL CONFIGURATION AND BUILD PROCEDURE ***
*** KERNEL OPTION SELECTION ***
Selection Kernel Option
--------------------------------------------------------------
1 System V Devices
2 Logical Volume Manager (LVM)
3 NTP V3 Kernel Phase Lock Loop (NTP_TIME)
4 Kernel Breakpoint Debugger (KDEBUG)
5 Packetfilter driver (PACKETFILTER)
6 Point-to-Point Protocol (PPP)
7 STREAMS pckt module (PCKT)
8 X/Open Transport Interface (XTISO, TIMOD, TIRDWR)
9 ISO 9660 Compact Disc File System (CDFS)
10 Audit Subsystem
11 ACL Subsystem
12 Logical Storage Manager (LSM)
13 ATM UNI 3.0/3.1 ILMI (ATMILMI3X)
14 IP Switching over ATM (ATMIFMP)
15 LAN Emulation over ATM (LANE)
16 Classical IP over ATM (ATMIP)
17 ATM UNI 3.0/3.1 Signalling for SVCs (UNI3X)
18 Asynchronous Transfer Mode (ATM)
--- MORE TO FOLLOW --- [Return]
19 All of the above
20 None of the above
21 Help
22 Display all options again
--------------------------------------------------------------
Enter the selection number for each kernel option you want.
For example, 1 3 [20]: 19
You selected the following kernel options:
System V Devices
Logical Volume Manager (LVM)
NTP V3 Kernel Phase Lock Loop (NTP_TIME)
Kernel Breakpoint Debugger (KDEBUG)
Packetfilter driver (PACKETFILTER)
Point-to-Point Protocol (PPP)
STREAMS pckt module (PCKT)
X/Open Transport Interface (XTISO, TIMOD, TIRDWR)
ISO 9660 Compact Disc File System (CDFS)
Audit Subsystem
ACL Subsystem
Logical Storage Manager (LSM)
ATM UNI 3.0/3.1 ILMI (ATMILMI3X)
IP Switching over ATM (ATMIFMP)
LAN Emulation over ATM (LANE)
Classical IP over ATM (ATMIP)
ATM UNI 3.0/3.1 Signalling for SVCs (UNI3X)
Asynchronous Transfer Mode (ATM)
Is that correct? (y/n) [y]: [Return]
Do you want to edit the configuration file? (y/n) [n]: [Return]
The system will now automatically build a kernel
and then reboot. This will take approximately 15
minutes, depending on the processor type.
When the login prompt appears after the system
has rebooted, use 'root' as the login name and
the SUPERUSER password that was entered during
this procedure, to log into the system.
*** PERFORMING KERNEL BUILD ***
Working....Tue Jan 26 16:47:00 EST 1999
Working....Tue Jan 26 16:49:03 EST 1999
Working....Tue Jan 26 16:51:06 EST 1999
syncing disks... done
rebooting.... (transferring to monitor)