[CVA File Information]
CVA Version=2.0
CVASyntaxVersion=1.0L

[Software Title]
IL=Armada Rage Mobility and LT Pro Driver for Windows ME.

[IL.Software Description]
This is the Windows ME video driver for Rage LT 
Pro and Mobility graphics chips in the Armada Series and models 
listed above.  It enables the features and functions of these 
graphics chips.

[General]
Version=1.00
Revision=C
Pass=2
Installation=Installable,SilentInstall
UserMustBeLoggedIn=

[DetailFileInformation]
ATI2DRAB.DRV=<WINSYSDIR>,0x0004,0x000C,0x087D,0x0000

[SupportedLanguages]
Languages=IL


[Softpaq]
SoftpaqNumber=SP16885
SoftpaqEffectiveDate=04/17/2001
SoftpaqUtilityVersion=4.0
SupersededSoftpaqNumber=SP15065
PackageExtraction=

[Operating Systems]
WIN9X=OEM

[System Information]
SysID1=0x0508
SysName1=Armada E700,
SysID2=0x0538
SysName2=Armada M700,
SysID3=0x053C
SysName3=Armada M300,
SysID4=0x05BC
SysName4=Armada E500,
SysID5=0x05F2
SysName5=Armada V300,

[Devices]
VEN_1002&DEV_4C4D=RAGE MOBILITY AGP
VEN_1002&DEV_4C49=RAGE LT PRO PCI

[Software Dependencies]
PN=
SP=

[IL.Enhancements]
- Fixed an issue which would not allow installation from the desktop
- Fixed an issue where extended desktop on an external adapter would not refresh
- Fixed an issue where hibernating with extended desktop enabled would hang the system
- Fixed an issue which caused an error message to appear when using Fn-F4 with an external adapter
- Fixed various other multi-monitor and multi-adapter issues
- Fixed various suspend/resume related display corruption issues

[IL.Solutions]

[IL.Notes]
DirectX 7.0 or later required.

[End-User Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To install, run SETUP.EXE.  For example, enter:

   <path>\SETUP
   where <path> is the drive and directory created in step 2

   Follow the on-screen instructions.

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Silent Installation Instructions]
1. Download the SoftPaq to a directory on your hard drive.
The file downloaded is a self-extracting executable with a filename 
based on the SoftPaq Number above.

2. Execute the downloaded file and follow the on-screen instructions. 
Entering "Y" to confirm the unpacking of files creates a new directory 
folder in the download directory.  All files are unpacked into this 
newly created directory.

3. After the directory has been created, you may delete the 
self-extracting file downloaded in step 1.

4. To silent install, use the /k switch from the command prompt.  For example, enter:

   <path>\SETUP /k
   where <path> is the drive and directory created in step 2

5. After the installation is completed, you may delete the directory 
created in step 2 if you wish.

[Blind Installation Instructions]


[Uninstallation Instructions]


[Install Execution]
Install="setup.exe"
SilentInstall="setup.exe" /k -SMS
BlindInstall=
Uninstall=
InstallRecover=

[MSBATCH Installation Instructions]


[NTDS Installation Instructions]