PC Server 704 Flash BIOS Update (5M0, 6MM) Diskette    V5.45G


  Using the Command Line Options
  ==============================

  The following Command Line Options allow you to define specific
  conditions for running the diagnostic programs at startup time.

  At the operating system prompt, type "QAPRO /YYY" (where "/YYY"
  represents one or more of the following from the list below);
  then press ENTER:

  /B&W                The /B&W option forces the program to load
                      in black and white (monochrome) mode.

  /LOG=file           The /LOG=file option directs the test
                      programs to start using a specified Error
                      Log file.

  /INT10              The /INT10 option forces the test programs
                      to use the Basic Input/Output System (BIOS)
                      for screen writes.

  /OXXX               The /OXXX option, where XXX=test group,
                      omits the designated test group from
                      testing.  (See /IXXX for a list of valid
                      test groups.)

  /OALL               The /OALL option omits all test groups from
                      testing.  (See /IXXX for more information.)

  /IXXX               The /IXXX option, where XXX=test group,
                      includes the designated test group.  When
                      used in conjunction with the /OALL option,
                      you can specify the tests that you want to
                      include.  These options are helpful if you
                      have insufficient memory available to load
                      all of the test programs simultaneously, or
                      if you want to test specific test groups.

                      The valid test groups are:

                      LPT     Parallel port
                      COM     Serial ports
                      HDU     Hard disk (IDE only)
                      FDU     Diskette drive
                      VID     Video
                      MBD     System board
                      KBD     Keyboard
                      PDV     Pointing device or mouse
                      MEM     Memory
                      SCU     SCSI
                      CDR     CD-ROM
                      SYS     System information/Utilities

                      You can include this option multiple times.
                      For example, to run the keyboard, SCSI, and
                      CD-ROM test groups, type:
                      "QAPRO.EXE /OALL /IKBD /ISCU /ICDR"

  /USRCONFIG=file     The /USERCONFIG=file option tells the test
                      programs to look for a user diagnostic
                      configuration file other than the default
                      USERDIAG.CFG.

  /SCRIPT=file,R      The /SCRIPT=file,R option with the ",R" runs
                      the selected script.  If you omit the ",R"
                      parameter, the script is loaded but not run.


                      NOTE:  You can use a "-" instead of a "/" as
                             the command line switch.