This file contains information about installing IDE CD-ROM device
drivers on IBM Personal Computers and Servers.

Note: There is a READ.ME file on this diskette that provides more
detailed information about certain configurations and systems.

The following topics are included in the file:

   1.0  Installing the IDE CD-ROM Device Driver on OS/2
   2.0  Installing CD-ROM Support in DOS/Windows 3.x
   3.0  Trademarks and Notices


1.0  Installing the IDE CD-ROM Device Driver on OS/2
____________________________________________________

To install the IDE CD-ROM Device Driver:

1.  Start an OS/2 session.

2.  Execute X:\path\CIDCD where X:\path is the full path to the
    source files.

3.  When prompted for Input Source Drive & Path enter the path info
    from step 2.

4.  When prompted for Input Target Drive & Path enter the OS/2 drive
    letter.

5.  Shutdown and reboot to complete the installation.


2.0  Installing CD-ROM Support in DOS/Windows 3.x
_________________________________________________

To install the IDE CD-ROM Device Driver:

1.  Go to a DOS command prompt.

2.  Insert the IBM IDE CD-ROM Drive Option/Device Driver Diskette into
    your diskette drive.

3.  At the DOS command prompt (C:>) type "A:UINSTALL" and follow the
    instructions on the screen.

4.  UINSTALL will prompt you for the source and destination drives.

5.  UINSTALL will present a menu of installation options.  Each of
    these installation options is equipped with help menus to aid in
    understanding their function.  Install one or more of the
    following options as appropriate for your system.

    o Install IDE CD-ROM DOS/Windows Support Software

      This option must be selected to install the basic software that
      supports the IBM IDE CD-ROM drive on DOS systems.

    o Update for SMARTDRV 4.0

      This option must be used if you are using SMARTDRV.EXE version
      4.0.  Go to the directory which contains SMARTDRV.EXE and type
      "SMARTDRV ?" to display the version number.  See section 1.9 for
      more information about SMARTDRV.

    o DOS 6.2+ - Update for SMARTDRV/PhotoCD

      This option must be used if you have MS-DOS 6.2 or PC-DOS 6.3
      and you want to use Kodak PhotoCD or other multi-session discs on
      your system.  See section 1.9 for more information about
      SMARTDRV.

    o Win 3.0+ - 32 Bit Disk Driver/Primary IDE Port

      This option must be used if you installed the IBM IDE CD-ROM on
      the primary IDE port (or the only IDE port of single-port systems)
      and you use Windows.


7.  Once you have installed the appropriate options, exit the program
    and re-start your system (Ctrl+Alt+Del) to activate the changes.


3.0  Trademarks and Notices
____________________________________________

IBM and OS/2 are trademarks of the IBM Corporation.  Microsoft and
and Windows are trademarks or registered trademarks of Microsoft
Corporation.

Other company, product, and service names may be trademarks or service
marks of others.

Note to U.S. Government Users -- Documentation related to restricted
rights. -- Use, duplication or disclosure is subject to restrictions
set forth in GSA ADP Schedule Contract with IBM Corp.