IBM Netfinity 7000 M10 Diagnostics Flash Update Diskettes
                    Version 1.04
               Installation README File
                       2 OF  2

This README file contains the latest information about installing
the IBM Netfinity 7000 M10 Diagnostics.


CONTENTS
________

1.0  Installing IBM Netfinity 7000 M10 Diagnostics
2.0  Version Changes
3.0  Trademarks and Notices


1.0  Installing IBM Netfinity 7000 M10 Diagnostics
______________________________________________

The diagnostics on the IBM Netfinity 7000 M10 are located in the ROM.
In order to update the version of diagnostics in ROM two flash
diskettes are required.  The first diskette image is in the file
xxLxxxx and should be put on a diskette with the label "IBM
Netfinity 7000 M10 Diagnostics Flash Update Diskette 1 of 2".  The second
diskette image is in the file xxLxxxx and should be put on
a diskette with the label "IBM Netfinity 7000 M10 Diagnostics Flash
Update Diskette 2 of 2".

The procedure to update diagnostics is as follows:

   1. Insert the "IBM Netfinity 7000 M10 Diagnostics Flash Update Diskette
      1 of 2" into drive A.
   2. Start up or restart your IBM Netfinity 7000 M10 server.
   3. The system will boot off of the diskette and present
      a window which allows you the option to flash various
      options.  Choose "2 - Update Diagnostic".  Then choose
      "1 = United States".
   4. After loading the image from the diskette the system
      will prompt you to enter the second flash diskette which
      is labeled "IBM Netfinity 7000 M10 Diagnostics Flash Update Diskette
      2 of 2" and hit enter.
   5. After the images are loaded from diskette the system will
      ask you to wait while the images are flashed into ROM.
      When this is complete you will be prompted to remove the
      diskette and hit return to reboot the system.


2.0  Version Changes
____________________

Version  Changes
-------  ------------------------
1.00     First release.
1.02     The following fixes were made:
           - Include AP Test Good runs in Summary Log
           - Modify Error Codes for Non-existent Processors
           - Correct Memory Test Failure indication when "ALL
             Banks" is selected
           - Memory Test Failure with 4GB or larger (Retain Tip
             H165150)
           - Correct Diagnostics Revision Level in Setup
           - Correct Error Message for "Bad Processors"

1.04    The following fixes were made:
           - Memory Test Enhancements
           - Fix problem with wrapping the Status Queue in Raid Test
           - Fix Cache Test Failure with 550MHz Processors
           - Screen Overlaps after running SMBIOS
           - LED and PCI Bracket test changes to avoid Hang Condition
           - Modify Test Procedure to clarify Intrusion Test
           - New CD-ROM Drive won't recognize Test Media



3.0  Trademarks and Notices
___________________________

THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY
KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR
IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND
MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES
TO ANY PATENTS OR COPYRIGHTS.