7800 Family Manager Set for SCO UnixWare 3.2 and 4.2, and SCO UnixWare Openserver 5.0x V3.02.2
 
Adding BTLD at boot time.
-------------------------
Installing the Driver When Installing SCO UNIX
To install the alad/alad325 or blad/blad325 drivers at the same time 
you install SCO UNIX, follow the instructions below for the version 
of SCO UNIX you are installing.

  1. At the "Boot:" prompt type "ahslink"
  2. When asked for name of package, type "alad325"
  3. After kernel loads but before it runs, "link" prompts you
     to insert "7800 Family Manager" diskette.

 NOTE: You will be notified that an existing aladinit driver already exists
       and asked which routine you wish to replace.  Choose routine 25 to
       replace and continue with the installation.

Adding BTLD after initial installation.
---------------------------------------
   If SCO UNIX is already up and running use the installpkg command to
   install the driver.


 The following terms are trademarks of the IBM Corporation in the
  United States and/or other countries:

      IBM
       
  The following terms are trademarks of other companies:

  TRADEMARK                OWNER

  Adaptec                  Adaptec, Inc.
  SCO                      Santa Cruz Operations
   
	
  IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED,
  INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF
  FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY
  WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT.  BY
  FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY
  RELATED PATENTS OR COPYRIGHTS.
  THIS DRIVER IS COPYRIGHTED BY INTERNATIONAL BUSINESS
  MACHINES CORPORATION.  ALL APPROPRIATE RESTRICTIONS
  APPLY.

=====================================================================================