TITLE:              Running NetWare Lite and PC-NFS Together
DOCUMENT ID:        TID1200441
DOCUMENT REVISION:  1
DATE:               31MAR95
ALERT STATUS:       Yellow
README FOR:         NA

NOVELL PRODUCT and VERSION:
NETWARE LITE V1.1

ABSTRACT:
NA

---------------------------------------------------------------------
DISCLAIMER: THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR
EXTERNAL TO NOVELL.  NOVELL MAKES EVERY EFFORT WITHIN ITS MEAN TO
VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS
DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR
IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
---------------------------------------------------------------------

ISSUE:

Running NetWare Lite and PC-NFS Together on NetWare Lite v1.1

Note:  This document contains an unsupported setup and configuration,
and it is being presented as a "try at your own risk solution"
document.

NetWare Lite users have reported that they can get NetWare Lite or
PC-NFS(R) to work separately but not both together.  This document is
to help users run PC-NFS on a machine that is also running NetWare
Lite software.  The configuration listed has only been tested by
NetWare Lite users.

You must use the ODINSUP drivers from Novell to get this
configuration to work properly.  The following files are required:

     File Name                Version
     ---------------          ---------------
     PCNFS files              3.5
     DOS                      Any
     ODINSUP.COM              1.01
     LSL.COM                  Current
     IPXODI.COM               Current
     Card ODI Driver          Current
     NETBIND.EXE              1.1
     PCNFS.SYS                for v3.5
     SOCKDRV.SYS              for v3.5
     PROTMAN.SYS              1.1
     NFS-NDIS.SYS             for v3.5

Another thing you must be aware of is that NetWare Lite and PC-NFS
have a NET.EXE utility.  Therefore, make sure you issue the NET
command in the correct directory to ensure that the desired command
is processed.

Note:

-o-  ODINSUP.COM is found in DOSUP7.ZIP on NetWire.  To get this
file, type GO NOVFILES on CompuServe.  Then go into the Client
updates area, then into the DOS/Windows update files area.  The
DOSUP7.ZIP file also contains the latest LSL.COM and IPXODI.COM
files.

-o-  NETBIND.EXE and PROTMAN.SYS will be found on the NDIS driver
diskette that comes with your network board.

-o-  PCNFS.SYS, SOCKDRV.SYS AND NFS-NDIS.SYS come with the PC-NFS
package.

The following are samples of the AUTOEXEC.BAT, CONFIG.SYS, NET.CFG,
and PROTOCOL.INI files that can be used:

CONFIG.SYS

     c:\dos\ansi.sys
     dos=umb,high
     shell=c:\dos\command.com /p /e:1024
     buffers=40
     files=40
     device=c:\pcnfs.sys
     device=c:\sockdrv.sys
     device=c:\lanman\protman.sys
     device=c:\lanman\nfs-ndis.sys
     lastdrive=m

AUTOEXEC.BAT

     prompt $P$G
     doskey
     set nfsdrive=c
     set tz=cst6cdt
     c:\nwlite\lsl
     c:\nwlite\<drivername>
     odinsup
     netbind
     nfsrun
     c:\nwlite\ipxodi
     server
     client

NET.CFG

     protocol ODINSUP
          bind <drivername>

     link driver <drivername>
          int ?? (insert your interrupt)
          port ?? (insert your port address)
          frame=ethernet_ii
          frame=ethernet_802.2
          frame=ethernet_802.3
          frame=ethernet_snap
          protocol IPX O ethernet_802.3

PROTOCOL.INI

     [PROTOCOL MANAGER]
     DRIVERNAME = PROTMAN$

     [NFS-NDIS]
     DRIVERNAME = NFSLINK1
     BINDINGS=<DRIVERNAME>

---------------------------------------------------------------------
Any trademarks referenced in this document are the property of their
respective owners. Consult your product manuals for complete
trademark information.
---------------------------------------------------------------------