TITLE:              Installing ACCPAC on NWL Network
DOCUMENT ID:        TID1200437
DOCUMENT REVISION:  3
DATE:               27MAR95
ALERT STATUS:       Yellow
README FOR:         NA

NOVELL PRODUCT and VERSION:
NETWARE LITE V1.1

ABSTRACT:
NA

---------------------------------------------------------------------
DISCLAIMER: THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR
EXTERNAL TO NOVELL.  NOVELL MAKES EVERY EFFORT WITHIN ITS MEAN TO
VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS
DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR
IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
---------------------------------------------------------------------

ISSUE:

INSTALLING ACCPAC

GENERAL INFORMATION

1. Follow the installation instructions for NetWare Lite v1.1
carefully. Download document 1200387 from Novell's FaxBack Service or
TID1200387 from the NSE Pro or Compuserve for help with installing
and setting up a network.

2. The installation procedures will create a \NWLITE directory on
your C:\ drive. You need to edit a file called STARTNET.BAT that is
located in this directory.

3. Look for the line in STARTNET.BAT that loads the program called
SHARE. If you are using MSDOS, change that line to the following:
C:\DOS\SHARE /L:250 /F:10000 If you are using DR DOS, change the line
to the following, instead: C:\DRDOS\SHARE /L:250

4. The "FILES=" parameter in your CONFIG.SYS should be set as follows
on both the workstations and the server: FILES=250

5. Obtain the patches that Novell has released for NetWare Lite v1.1.
Please get document 13869 from Novell's FaxBack Service or TID013869
from the NSE Pro or Compuserve for more information.

INSTALLING WINDOWING SYSTEM MANAGER AND LANPAK (Much of the following
information was obtained from Computer Associates Limited. A similar
document is found on their fax system.)

1. Insert WSM DISK 1 in drive A: and type A:INSTALL from the root
directory to which you are installing. Answer "yes" to indicate that
you are installing on a network. You will be prompted for additional
disks.

2. Upon completion of the WSM install, you will be taken to the
"Install Programs" portion of WSM, at which point you should insert
the LANPak disk and continue.

3. When the system prompts you if you are installing on Novell
NetWare, answer NO. This is not Novell NetWare. NetWare Lite is a
peer-to-peer network that means that it is DOS-based--quite different
from NetWare 2.x and 3.x.

4. Choose "PC-Lan," or if you wish, choose "other," and type NETWARE
LITE. The preceding is the most critical step. If you have already
installed the LANPak as Novell, you are probably suffering a great
deal of "Unable to obtain access to...." messages. Just reinstall the
LANPak as above.

5. Continue with the application installation.

---------------------------------------------------------------------
Any trademarks referenced in this document are the property of their
respective owners. Consult your product manuals for complete
trademark information.
---------------------------------------------------------------------