TITLE:              NetWare Lite v1.1 Status Reports
DOCUMENT ID:        TID1200402
DOCUMENT REVISION:  2
DATE:               11Apr95
ALERT STATUS:       Yellow
README FOR:         NA

NOVELL PRODUCT and VERSION:
NETWARE LITE V1.1

ABSTRACT:
NA

---------------------------------------------------------------------
DISCLAIMER: THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR
EXTERNAL TO NOVELL.  NOVELL MAKES EVERY EFFORT WITHIN ITS MEAN TO
VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS
DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR
IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
---------------------------------------------------------------------

ISSUE:

NetWare Lite 1.1 Status Reports

Network software status reports 1 through 31 are documented in the
NetWare Lite manual on pages 138 through 144.  The following are
additional status reports.

Status Report 32:
The size of receive buffers specified in the server configuration is
too big for the LAN board being used.  The receive buffer size was
changed to the maximum packet size allowed by the LAN board.

Status Report 33:
The size of read buffers specified in the server configuration is too
big for the LAN board being used.  The read buffer size was changed
to the maximum packet size allowed by the LAN board.

Status Report 34:
SERVER.EXE cannot initialize network printer because the number of
configured printers is too small.

Status Report 35:
SERVER.EXE cannot initialize network printer because the number of
configured printers is too small.

Status Report 36:
Selected configuration of SERVER.EXE exceeds 64k of data memory. Use
NET.EXE to reduce configuration parameters. Reboot machine now, then
reconfigure server with NET.EXE while SERVER.EXE is not loaded.

Status Report 37:
CLIENT.EXE was loaded before SERVER.EXE. SERVER.EXE should be loaded
first if a Network Printer is, or will be, attached to this machine.

Status Report 38:
Not enough memory to load.

Status Report 39:
The IO buffer size specified in the server configuration is not a
multiple of 16.  The IO buffer size was changed to a multiple of 16.

Status Report 40:
The IO buffer size specified in the server configuration is not a
valid multiple of the receive buffer size.  The IO buffer size was
changed to two times the receive buffer size.

Status Report 41:
The number of IO buffers specified in the server configuration is
greater than the number of connections.  The number of IO buffers was
changed to the number of connections.

Status Report 42:
Byte value greater than 255 in configuration file was truncated.

Status Report 43:
CLIENT.EXE was not unloaded because no previously loaded CLIENT.EXE
could be found in memory.

Status Report 44:
CLIENT.EXE was not unloaded because the version of CLIENT.EXE in
memory is not the same as this one. You must run the same version of
CLIENT.EXE to unload it.

Status Report 45:
CLIENT.EXE was not unloaded because another program was loaded after
it.  You must unload this other program first to unload CLIENT.EXE.

Status Report 46:
CLIENT.EXE was unloaded from memory.

Status Report 47:
Byte value greater than 255 in NET.CFG configuration file was
truncated.

Status Report 48:
Bad route address syntax in NET.CFG configuration file.

Status Report 49:
SERVER.EXE was not unloaded because it is not currently loaded.

Status Report 50:
SERVER.EXE was not unloaded because the version of SERVER.EXE in
memory is not the same as this one. You must run the same version of
SERVER.EXE to unload it.

Status Report 51:
SERVER.EXE was not unloaded because another program was loaded after
it.  You must unload this other program first before unloading
SERVER.EXE.

Status Report 52:
SERVER.EXE was unloaded from memory.

Status Report 53:
This copy of SERVER.EXE is for update use only. SERVER.EXE did not
load.

Status Report 54:
This copy of CLIENT.EXE is for update use only. CLIENT.EXE did not
load.

Status Report 55:
SERVER.EXE was not loaded because an IPX socket could not be opened. 
Please configure IPX with more sockets before loading SERVER.EXE.

Status Report 56:
SERVER.EXE was not loaded because NETx.COM has been loaded.  Please
load SERVER.EXE before loading NETx.COM.

---------------------------------------------------------------------
Any trademarks referenced in this document are the property of their
respective owners. Consult your product manuals for complete
trademark information.
---------------------------------------------------------------------