NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  FNWCX25.EXE; F1 abends in X.25 console.
README FOR:  FNWCX25.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare Connect 2.0
NetWare 4.11
IntranetWare

ABSTRACT:

This Field Test File prevents intermittent file server abends when pressing the
F1 key while configuring X.25 parameters via NWCCON.NLM (Configure AIOPAD
parameters).  This Field Test File is recommended only to NetWare Connect
2.0.30 users who are using IntranetWare or NetWare 4.11 as a host platform.
 This is a Field Test File and has not been thoroughly tested by Novell.


 -----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
 -----------------------------------------------------------------


THIRD-PARTY SOFTWARE CONFIGURATION

IntranetWare or NetWare 4.11
 NetWare Connect 2.0.30, inside the AIOPAD configuration section of NWCCON.NLM.

SYMPTOM:

AIOPDCON.NLM - Pressing F1 when configuring the AIOPAD parameters inside
NWCCON.NLM intermittently causes file server abends.  The specific error
message seen when this happens is:  AIOPDCON.NLM: Page Fault Processor
Exception Abend.

SOLUTION: 

AIOPDCON.NLM - 2.1.0 - Code modified to prevent abend when pressing F1 in X.25
configuration console.  (NWCCON.NLM --> Configure AIOPAD Parameters).
 See instructions.

Self-Extracting File Name: FNWCX25.EXE

Files Included     Size     Date      Time

..\
     FNWCX25.TXT     (This file)
    AIOPDCON.DAT           53248         7-29-94      9:13:42 pm
    AIOPDCON.HLP            8286          7-7-94     10:14:10 pm
    AIOPDCON.MSG            2413        10-10-96     11:33:42 pm
    AIOPDCON.NLM           30119        10-10-96     11:34:24 pm
     FNWCX25.TXT            3094         6-18-97      7:34:46 pm


Installation Instructions:

From the file server console:
 [] Unload NWCCON if loaded
 [] Run NWCSTOP.NCF

 From a client:
 [] Log into the NetWare Connect file server with full rights to SYS:SYSTEM.
 [] Create a directory and "explode" FNWCX25.exe into it.
 [] Create a backup directory and copy the following files into it:
 F:\system\aiopdcon.nlm
 F:\system\aiopdcon.dat
 F:\system\nls\4\aiopdcon.hlp
 F:\system\nls\4\aiopdcon.msg
 [] Copy the aiopdcon.nlm and aiopdcon.dat from FNWCX25.exe to F:\system
directory.
 [] Copy the aiopdcon.msg and aiopdcon.hlp from FNWCX25.exe to F:\system\nls\4
directory.

 From the file server console:
 [] Run NWCSTART.NCF.


 -----------------------------------------------------------------
 Any trademarks referenced in this document are the property of their
respective owners.  Consult your product manuals for complete trademark
information.
 -----------------------------------------------------------------