NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              SAA Windows Client Update
DOCUMENT ID:        TID251003
DOCUMENT REVISION:  B
DATE:               30AUG94
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         SAA012.EXE

NOVELL PRODUCT and VERSION:
NetWare for SAA 1.3
NetWare for SAA 1.3A
NetWare for SAA 1.3B

ABSTRACT:

SAA012.EXE provides updates for Windows client modules which come with NetWare
for SAA 1.3, 1.3A and 1.3B.  Most sites do not use the modules.  If you are
using the modules supplied on the disk labeled LU6.2 Client Modules, we
suggest that you download SAA012.EXE for an updated version.

-----------------------------------------------------------------
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.  NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.  HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY.  NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
-----------------------------------------------------------------

SYMPTOM

WTSPX post error
General Protection Fault Error
Corrupted Buffer
WSTRACE.DLL missing

NEW FEATURES
1. Command Parameters

2. Added support for the fully qualified LU name in the verbs ATTACH_LU and
MODIFY_LU.


SOLUTION

Apply SAA012.EXE.

Self-Extracting File Name:  SAA012.EXE     Revision:  B

Files Included     Size     Date      Time

\
  SAA012.TXT         (This File)
   WSLIB.DLL      49120   05-27-93   12:00p
   WTSPX.DLL      26048   05-12-94   11:29a   *598
  PBWIND.DLL      27296   06-15-94    4:26p   *617
 WINAPPC.EXE      44016   03-03-94   10:17a   *572
 WINCPIC.DLL      50496   03-03-94   10:19a   *572
 WINCPIC.EXE      50496   03-03-94   10:19a   *572
 WINCPIC.LIB       3584   03-03-94   10:19a   *572
 WSTRACE.DLL       9744   03-31-93   10:55a
 WSTRANS.DLL      51776   07-30-93    9:13a


*Novell internal control number 
 
Installation Instructions:
Copy the files in SAA012 over the existing same named files.  No
reconfiguration is required. 
 
Patch History: 
SAA012 supersedes SAA011, which superseded SAA006, PTF 444, and PTF 441.


COMMAND LINE PARAMETERS
You can now input a command parameter while starting NetWare LU6.2 for Windows
1.2.  The command line is not case sensitive.

1. To load the Protocol Boundary, specify the following command in the Windows
Run command dialogue box: WINAPPC PB
 or
    WINAPPC PB/A     If you do not want to be prompted for an "OK".

2. To load the Protocol Boundary, and CPI-C, specify the following command in
the Windows Run command dialogue box: WINAPPC CPIC
your_side_information_file_name
 or
    WINAPPC CPIC your_side_information_file_name/A
       If you do not want to be prompted for an "OK".

3. To start Windows, and tell Windows to run NetWare LU6.2 for Windows
immediately, use the following command line: WIN /3 WINAPPC CPIC
your_side_information_file_name
 or
    WIN /3 WINAPPC CPIC your_side_information_file_name/A 
        If you do not want to be prompted for an "OK".

4. To decrease memory consumption by NetWare LU6.2 for Windows 1.2, and the
maximum data size specified in your LU6.2 program to less than 32K; modify the
WSG.CFG memory field TRAN_SPX_GLOBAL_MEMORY.

For example, if the maximum data size is 512 bytes specify:                
TRAN_SPX_GLOBAL_MEMORY=512

NEW WS.CFG PARAMETER
When a CMACCP call is made, the software waits until either an allocate
request has been received, or 15 seconds (default) have passed.  You can now
change the length of the wait by placing the following in WS.CFG.
      CPIC_TIME_OUT=N

With "N" being a number from 0 to 60, chosen by you, for the number of seconds
you want the software to wait.
 
----------------------------------------------------------------
Any trademarks referenced in this document are the property of their
respective owners.  Consult your product manuals for complete trademark
information.
-----------------------------------------------------------------



ÿ