NOVELL TECHNICAL INFORMATION DOCUMENT TITLE: ODIWAN1: ODI WAN update to support ODI 3.31 README FOR: ODIWAN1.EXE NOVELL PRODUCTS and VERSIONS: NetWare 3.12 NetWare 4.1 NetWare MultiProtocol Router 3.1 MPR 3.1 - NIAS NetWare 4.11 MPR IW 4.11 ABSTRACT: ODIWAN1 contains the updated WAN TSM modules to support the ODI 3.31 spec. You must install this update on your server if you have applied the ODI 3.31/1.11 update kit and your server is running NIAS 4.0 or MPR 3.1. Note: This update requires ODI33E.EXE or later to be installed. NWC 2.0 and MPR 3.0 are not supported with this update. ----------------------------------------------------------------- DISCLAIMER THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION. ----------------------------------------------------------------- ISSUE: INSTALLATION INSTRUCTIONS: ================================================== Section 1 Installing ODIWAN1.EXE Section 2 Issues and Tips ______________________________________________________________________ ================================================== Section 1 Installing ODIWAN1.EXE ______________________________________________________________________ Note: This update is for those who have a requirement to update their server with the ODI 3.31/1.11 update kit and the server also has NIAS V4.0 or MPR V3.1 installed. It is not necessary to apply this update unless you have installed the ODI 3.31 update kit (ODI33x.EXE). Note: This update is not supported on NWC V2.0 or MPR V3.0. The install will check for these versions and not install the update. To install ODIWAN1 on a local server, complete these steps: 1. Install ODI33E.EXE or later. ODI_KIT (not ODIKIT) must be listed under the Currently Installed Products (load INSTALL > Product Options > View installed products). ODI_KIT (not ODIKIT) indicates that the ODI 3.31/1.11 support files have been applied with ODI33E.EXE or later. 2. Backup the files on your server that are included in this update. They are listed below. 3. Explode the file ODIWAN1 into an empty directory on the server. (To explode the file, type ODIWAN1.EXE .) NOTE: If a floppy disk is going to be created for this install, then copy the files in the directory ODIWAN onto one floppy and label it ODIWAN with the DOS label command. 4. At the server console prompt, type LOAD INSTALL . 5. Select Product Options, and then select View/Configure/Remove installed products. A new window will display the NetWare products currently installed on your server. 6. Press to install ODIWAN1 A new window will display a prompt with drive A: as the default. 7. Point INSTALL to the path containing the ODIWAN directory. For example, SYS:\PATCHES\ODIWAN If you are installing from floppy, then the floppy must be labeled ODIWAN (with the DOS label command); otherwise, the install will ask to continue to insert the disk. 8. Press The "Installation Options" menu will appear after a few moments. 9. The selection "Install Product" will be highlighted; press . 10. Select the local server, then select Yes to start the installation. The following message will appear when all files have been installed: "Installation was successful. Bring down and restart each server on which you installed to ensure that it uses the newest NLM files. " 11. Press The "Installation Options" menu will reappear. 12. Press 13. Select "Yes". The "Currently Installed Products" window will reappear, showing the software you just installed. 14. Press to return to the "Installation Options" menu. 15. Press again. 16. Exit INSTALL. When you load INSTALL and select Product Options > View/Configure/Remove installed products, the following product will be listed: ODI_WAN V1.00 ODI WAN update to support ODI 3.31 spec ================================================== Section 2 Issues and Tips ______________________________________________________________________ 1. The ODI 3.31 update (ODI33x.EXE) may have been applied to a server before any WAN related products, like NetWare Connect V2.0 (NWC), MultiProtocol Router V3.1 (MPR), or NIAS 4.0, were installed. However, if NWC, MPR, or NIAS is installed at a later time (after the ODI33x.EXE) the following may be reported when PPPTSM loads: PPPTSM 21: MSM major/minor version mismatch. Module initialization failed. Explanation: The version information provided by MSM is not the version expected by PPPTSM. ODI33x.EXE will update the MSM.NLM to Version 3.54, which is based on the 3.31 ODI spec. Action: If NetWare Connect V2.0 or MPR V3.0 is installed, then the solution is to manually apply LANDR9.exe and use the MSM and LAN Drivers written to the ODI 3.30 spec. NWC V2.0 and MPR V3.0 are not supported with the ODI 3.31 spec. If MPR V3.1 or NIAS V4.0 is installed, then the solution is to apply this update, ODIWAN1.EXE. If you installed ODI33D.EXE, then you need to install ODI33E.EXE; see step 1 above. 2. Support Pack 3 does not contain this ODI WAN update. 3. The WAN TSMs in NIAS V4.1.0 will support the ODI 3.31 spec. Do not install ODIWAN1.EXE on a NIAS V4.1.0 system. However, if you do, the ODIWAN1 install will not overwrite the NLMs installed by NIAS V4.1.0 because the NLM versions are newer in NIAS V4.1.0; therefore, installing ODIWAN1.EXE on a NIAS V4.1.0 system has no effect. Self-Extracting File Name: ODIWAN1.EXE Files Included Size Date Time ..\ ODIWAN1.TXT (This file) ..\ODIWAN\ MPRDINST.MSG 863 1-3-96 6:00:36 pm MPRDINST.NLM 6535 1-3-96 6:00:36 pm PINSTALL.HLP 5585 11-15-95 6:54:18 pm PINSTALL.NLM 161904 1-4-96 12:15:08 am PSCRIPT.DAT 2486 7-3-97 2:17:40 pm ..\ODIWAN\SERVER\ DMGMT.NLM 31513 6-18-97 1:01:38 am FRTSM.NLM 35166 6-18-97 6:42:04 pm NW2000.LAN 49641 6-2-97 4:31:06 pm PPPTRACE.NLM 61207 6-2-97 4:50:24 pm PPPTSM.NLM 195708 6-18-97 1:34:58 am SYNCPLUS.LAN 56300 6-2-97 4:30:18 pm WHSMAIO.LAN 29968 6-18-97 8:22:34 pm WHSMCAPI.LAN 60373 6-18-97 12:51:08 am WSM.NLM 45451 6-2-97 4:13:28 pm X25TSM.NLM 282014 6-3-97 6:41:48 pm Installation Instructions: See above. ----------------------------------------------------------------- Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information. -----------------------------------------------------------------