NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:  Desktop Rebuilding with Dayna's Desktop
README FOR:  RBUILD.EXE

NOVELL PRODUCTS and VERSIONS:
NetWare for Macintosh 3.011
NetWare for Macintosh 3.12

ABSTRACT:

This utility, Dayna's Rebuilder, makes it possible to rebuild a
NetWare for Macintosh volume's desktop from a Macintosh
workstation on the network running a System 6.x or 7.x operating
system.



-----------------------------------------------------------------
 DISCLAIMER
 THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO
NOVELL.  NOVELL
 MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE
 INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL
 MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.

-----------------------------------------------------------------


SYMPTOM:

The ability to rebuild a remote desktop was not included with
Apple's System 7 Operating System.

 With NetWare for Macintosh 2.x and 3.x, you must rebuild the
desktop using one of two following options:

 Option 1:

 Rebuild the desktop from a System 6.x Macintosh workstation or a
System 7.x workstation booted with a System 6.x System diskette.

 Option 2:

 Rebuild the desktop using the Dayna's Rebuilder utility included
in REBLD.SEA file.  (This utility also ships with Dayna's
NetMounter product.)  The Rebuilder can be used on a Macintosh
workstation running the System 6.x or 7.x operating system.

 To use this utility, do the following steps:

 1.Copy the Dayna Rebuilder utility to your Macintosh local hard
disk.

 2.Log in to the NetWare server from your Macintosh Chooser as
Supervisor and mount the volumes that you wish to rebuild on your
desktop.

 3.Launch the utility by double-clicking on the Dayna Rebuilder
icon.

 4.A dialog box will appear on your desktop.  At this point,
highlight the volume that you wish to rebuild and click on the
Rebuild button.  If you wish to rebuild multiple volumes, hold
down the <Shift> key, highlight each volume you want to rebuild,
and click on the Rebuild button.

 5.A status bar will appear on the desktop.  A dialog box stating
that each desktop that has been successfully built will appear
when the rebuilding is complete.  For the Finder to recognize
each new Desktop, you may need to restart or unmount and remount
each rebuilt volume.


SOLUTION: 

Use the utility included in this file to rebuild the remote
desktop.

Self-Extracting File Name: rbuild.exe

Files Included     Size     Date      Time

..\
      RBUILD.TXT     (This file)
       REBLD.EXE           64848          6-7-95     12:57:58 pm


Installation Instructions:

Instructions for extracting the Macintosh binary files:

 1. Copy the dos executable file REBLD.EXE to a NetWare volume
with Macintosh name space support.

 2. Execute the file from a DOS workstation to self extract to
the Macintosh binary self extracting archive. (Type "REBLD" at
the DOS prompt.)

 3. Execute the Macintosh self extracting archive from a
Macintosh workstation. (Double click on the REBLD.SEA icon from a
Macintosh client to expand it.)




-----------------------------------------------------------------
 Any trademarks referenced in this document are the property of
their
 respective owners.  Consult your product manuals for complete
trademark
 information.

-----------------------------------------------------------------