NOVELL TECHNICAL INFORMATION DOCUMENT TITLE: SFTUTL.EXE for SFT III for NetWare 3.11 DOCUMENT ID: TID000380 DOCUMENT REVISION: A DATE: 01JUL93 ALERT STATUS: Yellow INFORMATION TYPE: Symptom Solution README FOR: SFTUTL.EXE NOVELL PRODUCT and VERSION: NetWare SFT III 3.11 ABSTRACT: SFTUTL.EXE contains monitoring utilities for SFT III for NetWare 3.11. The following files are included: DEVMON.NLM, SET.NLM, NMSLMON.NLM SETVIDEO.EXE. _________________________________________________________________ DISCLAIMER THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION. _________________________________________________________________ Self-Extracting File Name: SFTUTL.EXE Files Included Size Date Time SFTUTL.TXT (This File) DEVMON.NLM 50660 2-08-93 3:13p NMSLMON.NLM 26713 2-16-93 8:52a SET.NLM 73263 2-03-93 1:11p SETVIDEO.EXE 700 1-27-93 7:37a DEVMON is an additional module to get lan information, since that information is no longer available in monitor. Load this module in the ioengine. SET is a menu driven utility for viewing and setting set parameters. Can be loaded in either engine. NMSLMON is a utility for troubleshooting the Eagle NMSL cards. It specifically monitors two custom statistic counters and displays them on the ioengine screen. SETVIDEO is a dos based utility used to change the cmos setting if unequal monitors are used, i.e. monochrome and color. To install this version of SFTUTL: Copy the setvideo.exe to the boot partition and execute it before loading mserver.exe. The three nlms can be loaded from the boot partition or from the sys volume, so either copy them to one or both. To implement SFTUTL: 1) Load the nlms in the appropriate engine. ÿ