****************************************************************
INSTALLING PCN2L DRIVERS
****************************************************************
The following describes how to install this new lan driver:
1. Copy the APCN2L.LAN file to the AUXGEN diskette (2.1x Netware) or to the SYSTEM-1 diskette (2.2 Netware).
2. Copy the *.OBJ files to the LAN_DRV_001 diskette.
3. Regen the 2.x operating system (Use NETGEN for 2.1x Netware or use INSTALL for 2.2 Netware).
4. Reinstall the OS on the server.
5. Make sure that the PCN2L.RPL file is located in the LOGIN Directory.
6. Try to remote boot again.
|