Technical Information Document
Updated NCONFIG.EXE for NetWare 2.2 - TID204 (last modified 16AUG1995)
204 204
associated file

Click filename to download:
nconfg.exe; 77251 bytes; Date/Time: 09-18-1993/02:06PM
abstract

This version of NCONFIG.EXE addresses a problem using the -M option with the NetWare 2.2 INSTALL.EXE program. The traditional naming convention for LAN drivers is to use A, B, C, or D as the first letter in the name of the LAN driver. If this naming convention was not followed, the previous version of NCONFIG.EXE (v1.0) would display an error message when attempting to use INSTALL -M.

installation

INSTALLATION:

To use NCONFIG.EXE V1.1 make sure you have a backup copy of NCONFIG.EXE. Then replace the old one on the SYSTEM-1 diskette or directory (depending on whether you use the diskette or hard disk method) with the new NCONFIG.EXE V1.1.

NCONFIG.EXE will then be used by INSTALL the next time it is run.

symptoms

1 Self-Extracting File Name: NCONFG.EXE Revision: A

Files Included Size Date Time

\
  NCONFG.TXT (This File)
 NCONFIG.EXE 124499 2-12-92 9:55a

          README FILE FOR NCONFIG.EXE V1.1
This readme file accompanies NCONFIG.EXE V1.1 for NetWare v2.2.

This version of NCONFIG.EXE addresses a problem using the -M option with the v2.2 INSTALL.EXE program. The traditional naming convention for LAN drivers is to use A, B, C, or D as the first letter in the name of the LAN driver. If this naming convention was not followed, the previous version of NCONFIG.EXE (V1.0) would display the following message when attempting to use INSTALL -M:

     "Lan Driver Description file for <NETWORK BOARD> cannot be found. Will not show up in OS generation screen."

NCONFIG.EXE V1.1 does not require the LAN driver to have A , B, C, or D included anywhere in the name.

INSTALLATION:

To use NCONFIG.EXE V1.1 make sure you have a backup copy of NCONFIG.EXE. Then replace the old one on the SYSTEM-1 diskette or directory (depending on whether you use the diskette or hard disk method) with the new NCONFIG.EXE V1.1.

NCONFIG.EXE will then be used by INSTALL the next time it is run.

solutions

Apply files found in NCONFG.EXE

contents 

Self-Extracting File Name:  nconfg.exe

Files Included       Size   Date         Time    Version   Checksum

\
    NCONFG.TXT       2441   09-17-1993   01:07AM
   NCONFIG.EXE     124499   02-13-1992   09:55AM
Document Title: Updated NCONFIG.EXE for NetWare 2.2
Document ID: 204
Creation Date: 01JUL1993
Modified Date: 16AUG1995
Document Revision: 1
Novell Product Class: NetWare
Novell Product and Version: NetWare 2.2

Disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.

Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.