NOVELL TECHNICAL INFORMATION DOCUMENT

TITLE:              Bernoulli Boot Problem Fix
DOCUMENT ID:        TID000261
DOCUMENT REVISION:  A
DATE:               01JUL93
ALERT STATUS:       Yellow
INFORMATION TYPE:   Symptom Solution
README FOR:         PAT315.EXE

NOVELL PRODUCT and VERSION:
DR DOS 6.0 4/92

ABSTRACT:
This file contains the system file that fixes a problem where, booting from
a Bernoulli drive, any device in the config.sys failed as if placed after
the RCD.SYS driver.
_________________________________________________________________

DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. 
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. 
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY.  NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________

Self-Extracting File Name:  PAT315.EXE

Files Included     Size     Date        Time

  PAT315.TXT          (This File)
  IBMBIO.315      24474    1-10-92      3:15a


README of PATCH315.EXE


Product:       DR DOS 6.0

Description:   This patch fixes a problem where, when booting from a
Bernoulli drive, any DEVICE= statement in CONFIG.SYS failed if it was
placed after the device driver RCD.SYS v7.x and DOSOAD.SYS v1.x


ASSUMPTIONS:

1.  The file IBMBIO.315 is in the root directory of your C:\ drive.
2.  TaskMAX is not loaded.


INSTALLATION INSTRUCTIONS:

1.  Remove the attributes from the current working copy of IBMBIO.COM

        From the C prompt:
             Type: ATTRIB -RSH IBMBIO.COM
             Press <ENTER>

2.  Make a backup copy of IBMBIO.COM

             Type: COPY IBMBIO.COM C:\DRDOS\IBMBIO.OLD
             Press <ENTER>

3.  Replace the original IBMBIO.COM with the patched IBMBIO.315


             Type: COPY IBMBIO.315 IBMBIO.COM
             Press <ENTER>

4.  Verify the copied file is the correct size, date and checksum

             Type: CD \
        From the C prompt:
             Type: XDIR IBMBIO.COM /C
             Press <ENTER>

        The following message will display:

--a--- 24,474 1-10-92 3:15a DBAA c:ibmbio.com

NOTE: In Archive attribute (a) may be set, however it is not a required
attribute.

5.  Replace the System, Hidden, Read-Only attributes on IBMBIO.COM

             Type: ATTRIB +RSH IBMBIO.COM
             Press <ENTER>

6.  Reboot the computer.
ÿ