Title: NetWare Client for Windows NT Version: 3.5 _______________________________________________________________________ EFFECTIVE DATE: 6/19/95 OPERATING SYSTEM: Windows NT 3.5 DESCRIPTION: This contains installation instructions for the NetWare Client for Windows NT 3.5. This file also contains last-minute information that did not make it into the main documentation. Please take a few moments to review this file. CONTENTS: 1. PREREQUISITES 2. HOW TO INSTALL 3. ADDITIONAL DOCUMENTATION 4. COMPATIBILITY INFORMATION 5. FUTURE RELEASE ITEMS: PREREQUISITES: ** Your workstation must be running Windows NT 3.5. ** You must have a network adapter card installed on your Windows NT 3.5 workstation. HOW TO INSTALL: Remove Microsoft Client Software. Install the client software on the NT Workstation. Read the INSTNWAD.TXT file on Disk 1 of NetWare Administrator for Windows NT for further installation instructions. To remove the client software provided by Microsoft 1. Log in to the Windows NT workstation as a user who is a member of the "Administrators" group. 2. From the "Main" group, select "Control Panel." 3. Select "Network." 4. From the "Installed Network Software" list, select "Client Service for NetWare." 5. Select "Remove." The Microsoft client for NetWare is removed. Any existing NDIS drivers and the driver settings remain intact. 6. Reboot the workstation before installing the NetWare client software. Install the client software on the NT Workstation. 1. Log in to the Windows NT workstation as an NT user who is a member of the "Administrators" group. 2. From the "Main" group, select "Control Panel." 3. From the "Control Panel," select "Network." 4. From the "Network Settings" dialog, select "Add Software." 5. Scroll to the bottom of the "Network Software:" list box and select " Requires disk from manufacturer;" then select "Continue." You are prompted to insert a disk in drive A:. 6. Insert the NetWare Client for Windows NT Install Disk into drive A: and select "OK." 7. From the "Select OEM Option" dialog, select "Novell NetWare Client Services" and select "OK." 8. Install will detect your existing network adapter from Microsoft's NDIS information. If a driver is detected, you will be asked if you want to change to ODI?" If "No" is selected, then our install will bind to the NDIS driver and no additional setup will be necessary. If "Yes" is selected, then the ODI driver will be selected and a list of the settings will be shown. These settings have already been defined, so no changes are necessary. 9. If you have installed an NDIS driver that has no corresponding ODI driver, then the install will automatically bind to your NDIS driver and no further changes are necessary. The client software and driver are installed on the workstation. ADDITIONAL DOCUMENTATION: The documentation for this client kit is formatted as a Windows help file. After the client software is installed on the workstation, you can read the documentation by choosing the "Getting Started" icon in the NetWare folder. COMPATIBILITY INFORMATION: There are two FDDI cards made by SysKonnect: One EISA and one microchannel. The ODI drivers for these two cards are setup differently and will not be automatically displayed in the list of drivers during install. To install these drivers, you will need to select "Add adapter", then select "Other". You will then be prompted to give the appropriate path where these two ODI drivers reside. Setup will then read the OEMSETUP information and will then bring up the two cards to be selected. The install will proceed normally after that point. The following applications were tested for compatibility with the NetWare client: AutoCad LT 1.0 Microsoft Access 2.0 Aldus Page Maker 5.0 Borland C++ 4.02 Borland Dbase 5.0 WordPerfect Envoy 5.0 WordPerfect Express Fax+ Claris File Maker Pro 2.1 FoxPro 2.5 FreeLance 1.0 GroupWise 4.1a Harvard Graphics 2.0 WordPerfect InfoCentral 1.1 WordPerfect InForms 1.0a Intermission 4.0 Lotus 1-2-3 4.0 Mathcad 3.1 Micrographx Designer 4.0 Microsoft Publisher 2.0 Borland Paradox 5.0 Microsoft PowerPoint 4.0 Novell Presentations 3.0 Novell QuattroPro 6.0 Quicken 4.0 Microsoft Project 4.0 Microsoft Word 6.0a WordPerfect 6.1 Microsoft Works Lotus Notes 3.3 * JetAdmin ** * When Lotus Notes is installed, a Windows version of NWCALLS.DLL is copied to the Notes directory. This file will not work under Windows NT. You must be sure that the Windows NT version of NWCALLS.DLL is being used. The correct NWCALLS.DLL is dated 4-24-95 and has the file size of 99,535 bytes. ** The DOS version of Hewlett Packard's JetAdmin will work in a private "DOS Support" session. However, the Windows version of JetAdmin will not work because some of its library calls are unsupported. FUTURE RELEASE ITEMS: NetWare Connect support Remote Access Services support Global NetWare Directory Services (NDS) support NetWare Packet Signing support _______________________________________________________________________ DISCLAIMER Novell, Inc. makes no representations or warranties with respect to the contents or use of this document, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to revise this publication and to make changes to its content, at any time, without obligation to notify any person or entity of such revisions or changes. Further, Novell, Inc. makes no representations or warranties with respect to any NetWare software, and specifically disclaims any express or implied warranties of merchantability or fitness for any particular purpose. Further, Novell, Inc. reserves the right to make changes to any and all parts of NetWare software, at any time, without any obligation to notify any person or entity of such changes. TRADEMARKS Novell, NetWare, and the N-Design are registered trademarks and IPX, NetWare 2, NetWare 3, NetWare 4, NetWare Client, the NetWare Logotype, and SPX are trademarks of Novell, Inc. _______________________________________________________________________