DOCUMENT:Q71511  17-DEC-2000  [msdos]
TITLE   :Programs to Turn CAPS LOCK Key Off or On
PRODUCT :Microsoft Disk Operating System
PROD/VER:MS-DOS:3.x,4.x,5.x,6.0,6.2,6.21,6.22
OPER/SYS:
KEYWORDS:

======================================================================
-------------------------------------------------------------------------------
The information in this article applies to:

 - Microsoft MS-DOS operating system versions 3.1, 3.2, 3.21, 3.3, 3.3a, 4.0, 4.01, 5.0, 5.0a, 6.0, 6.2, 6.21, 6.22 
-------------------------------------------------------------------------------

SUMMARY
=======

You can use the MS-DOS DEBUG utility to create a program (CAPS_ON.COM) that
turns on the CAPS LOCK key. (Note: You can modify CAPS_ON.COM to turn CAPS LOCK
off; see the instructions following the steps for creation of CAPS_ON.COM.)

MORE INFORMATION
================

Follow the steps below to create CAPS_ON.COM:

1. Create a DEBUG script file (CAPS_ON.SCR) using a text editor such as the
   MS-DOS EDLIN line editor. (See the "Microsoft MS-DOS User's Guide" for more
   information on EDLIN.) The CAPS_ON.SCR file must contain the following lines
   exactly (where <ENTER> means to press the ENTER key on the keyboard):

   a 100<ENTER>
   mov ax,0040<ENTER>
   mov ds,ax<ENTER>
   or byte ptr [0017],40<ENTER>
   mov ax,4c00<ENTER>
   int 21<ENTER>
   <ENTER>
   r cx<ENTER>
   000f<ENTER>
   n caps_on.com<ENTER>
   w<ENTER>
   q<ENTER>

2. Redirect this script file into the DEBUG utility by entering the following
   command at the DOS prompt:

   " C:\>debug < caps_on.scr" (without the quotation marks)

3. The CAPS_ON.COM program has now been created. To test the program, turn off
   the CAPS LOCK key, then call the CAPS_ON.COM program by entering the
   following command:

   " C:\>caps_on.com" (without the quotation marks)

   This should result in the CAPS LOCK indicator light coming on just as if you
   had pressed the CAPS LOCK key.

This program can be modified to turn CAPS LOCK off rather than on. To do this,
follow the steps in the example above, replacing all instances of "CAPS_ON" with
"CAPS_OFF" and substituting the following line for the fourth line of the DEBUG
script file:

   and byte ptr [0017],bf<ENTER>

Additional query words: 6.22 3.20 3.21 3.30 3.30a 4.00 4.01 5.00 5.00a 6.00 6.20

======================================================================
Keywords          :  
Technology        : kbMSDOSSearch kbMSDOS321 kbMSDOS400 kbMSDOS320 kbMSDOS330a kbMSDOS621 kbMSDOS622 kbMSDOS620 kbMSDOS600 kbMSDOS310 kbMSDOS500 kbMSDOS330 kbMSDOS401 kbMSDOS500a
Version           : MS-DOS:3.x,4.x,5.x,6.0,6.2,6.21,6.22

=============================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS
PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND.  MICROSOFT DISCLAIMS
ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  IN NO
EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR
ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL,
CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF
MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.  SOME STATES DO NOT ALLOW THE EXCLUSION
OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES
SO THE FOREGOING LIMITATION MAY NOT APPLY.

Copyright Microsoft Corporation 2000.