Domains Allowed on TCP/IP Node Limited by Memory (99591)


The information in this article applies to:

  • Microsoft LAN Manager 2.2
This article was previously published under Q99591

SUMMARY

The maximum number of domains supported by a TCP/IP node is limited by either memory or sessions on the hub.

The limit is calculated this way: 
   (domains x nodes) x 2 = Sessions used on hub + threads on hub service
If your hub is set up with 80 VCs, then you can have 20 domains on 2 nodes, or 10 on 3, or 5 on 4, or 1 domain on 40 nodes.

REFERENCES

Microsoft technical note "Microsoft TCP/IP Extensions for LAN Manager," part no. 098-37237
Modification Type:MajorLast Reviewed:9/30/2003
Keywords:KB99591
©2003 Microsoft Corporation. All rights reserved.