MORE INFORMATION
Card File Changes in NT 3.51
The only difference in the unicode format is the signiture (DKO) and the
characters, now 16-bits wide. The Signature can now be MGC.
The Cardfile file format is as follows:
Byte # Description
-------------------
0 - 2 Signature bytes--always "RRG" (52 52 47).
3 - 6 Last object's ID.
7 - 8 Number of cards in file.
Beyond the first 9 bytes are the index lines--the information about
the top line of each card. The first index entry begins at byte 9 in
the file, and successive entries begin 34 bytes after the beginning of
the last index entry (the second entry at byte 3D, the third entry at
byte 71, and so forth). The format for each index line entry is as
follows:
Byte # Description
-------------------
0 - 5 Null bytes, reserved for future use (should all be 00).
6 - 9 Absolute position of card data in file.
A Flag byte (00).
B - 32 Index line text.
33 Null byte; indicates end of index entry.
After the last index entry, each card's data is stored. Card data is
in one of four general formats: graphic and text, text only, graphic
only, and blank. Blank cards consist of 4 null bytes; the other card
formats are below:
Graphic Text Graphic
& Text Only Only
-------------------------------------------------------------------
0 - 1 0 - 1# 0 - 1 Flag Determining whether or not
the card contains an object.
2 - 5 * 2 - 5 Unique object ID.
6 - x * 6 - x The OLE object.
x+1 - x+2 * x+1 - x+2 Character width, used for device
independence.
x+3 - x+4 * x+3 - x+4 Character height.
x+5 - x+C * x+5 - x+C RECT: left - X-coordinate of the
upper-left corner.
top - Y-coordinate of the
upper-left corner.
right - X-coordinate of the
lower-right corner.
bottom- Y-coordinate of the
lower-right corner.
x+D - x+E * x+D - x+E Object type embedded=0, linked=1,
or
static=2 (values may change in the
future).
x+F - x+10 2 - 3 x+F - x+10# Length of text entry.
x+11 - y 4 - z * Text.
NOTE:
x = 6 + size in bytes of the entire OLE object (the entire size of the
object is not stored anywhere within the .CRD file). See below for
more information on the OLE object size.
y = x + 10 + length of text entry.
z = 3 + length of text entry.
# - These bytes are null if no object/text.
* - These bytes do not exist if no object/text.
The first byte of any card's data entry is pointed to by bytes 6-9 in
the index entry. Note that no null byte is used to indicate the end of
the card's data entry; the next card's data entry immediately follows
the last byte of the previous entry, which is null only if the
previous card has no text (null length of text entry).
OLE Object
The size of the OLE object is not stored anywhere within the .CRD
file. The OLE object could be loaded using OleLoadFromStream();
however, to get passed the OLE object, the file needs to be parsed.
The OLE object's format description is documented in Appendix C of the
"Object Linking and Embedding Programmer's Reference" version 1.0,
published by Microsoft Press, and also in the Microsoft Windows
Software Development Kit (SDK) "Programmer's Reference, Volume 1:
Overview," Chapter 6, Object Storage Format. Below is an algorithm
that uses the OLE object's format description to parse the OLE object
in the .CRD file and pass it.
Need Five Primary Functions
Primary Function Description
-----------------------------------
ReadLong() - Reads a long from the file and advances the file
pointer.
EatBytes(NumBytes) - Reads and discards the specified number of bytes
from the file and advances the file pointer.
RdChkVer() - Reads the version number and advances the file
pointer and returns TRUE if version is 1.0. To
check the version number, the received value
must be converted to Hex then checked against
0x0100.
(See below for the algorithm of this function.)
RdChkString() - Reads the string and checks the value to see if
it is either METAFILEPICT, BITMAP, or DIB, then
returns TRUE; otherwise, returns FALSE. Advances
the file pointer too.
SkipPresentationObj() - Reads and skips the variable-length presentation
object at the end of each object type.
(See below for the algorithm of this function.)
Algorithm to Skip Over the OLE Object
if (RdChkVer) // If the version is 1.0
Format = ReadLong(); // 1==> Linked, 2==> Embedded, 3==> Static
EatBytes(ReadLong()); // Class String
if (Format == 3) // Static object
ReadLong(); // Width in mmhimetric.
ReadLong(); // Height in mmhimetric.
EatBytes(ReadLong()); // Presentation data size and data itself.
else // Embedded or linked objects.
EatBytes(ReadLong()); // Topic string.
EatBytes(ReadLong()); // Item string.
if (Format == 2) // Embedded object.
EatBytes(ReadLong()); // Native data and its size.
SkipPresentationObj() // Read and eat the presentation object.
else // Linked object.
EatBytes(ReadLong()); // Network name.
ReadLong(); // Network type and net driver version.
ReadLong(); // Link update options.
SkipPresentationObj() // Read and eat the presentation object.
SkipPresentationObj()
if (RdChkVer) // If the version is 1.0
ReadLong(); // Format ID
if (RdChkString()) // if Class String is either
// METAFILEPICT or BITMAP or DIB.
ReadLong(); // Width in mmhimetric.
ReadLong(); // Height in mmhimetric.
EatBytes(ReadLong()); // Presentation data size and data itself
else
if (!ReadLong()) // if Clipboard format value is NULL
EatBytes(ReadLong()); // Read Clipboard format name.
EatBytes(ReadLong()); // Presentation data size and data itself.
RdChkVer()
OLEVer = ReadLong();
OLEVer = (((WORD)(LOBYTE(OLEVer))) << 8 | (WORD) HIBYTE(OLEVer);
if (OLEVer == 0x0100) // Always use Hex value.
return TRUE;
else
return FALSE;
Additional references: 3.10