PRB: Problem with Printing Files Larger than 25mb (99193)
The information in this article applies to:
- Microsoft LAN Manager 2.1
This article was previously published under Q99193 SYMPTOMS
Print files larger than 25 MB can sometimes cause the server, OS/2 and
LAN Manager to stop responding or hang, resulting in some output printed correctly but the rest being jumbled.
CAUSE
This can be caused by a conflict between two SCSI controller settings.
For the optical drive and SCSI drives from Storage Dimension (Optical
drive model # TMT2, 500 MB on each side) change the default settings as follows:
BASE IO address: default 330h--change to 134h.
IRQ: default 10--change to 11.
DEVICE ID: default qdc00h--change to qd8000h
SCSI ID: default 2--change to 3
PARITY off
SYNCH disabled
ADAPTIC 154x series BASE IO ADDRESS is C000H and SCSI ID is 7.
NOTE: In one case, these changes made it possible to print graphic
files as large as 103 MB.
| Modification Type: | Major | Last Reviewed: | 9/30/2003 |
|---|
| Keywords: | kbprb KB99193 |
|---|
|