Running ftp from Remote Boot Workstation (99143)
This article was previously published under Q99143
SYMPTOMS
If you try to run ftp from the LAN Manager TCP/IP Utilities from a
remote boot workstation, you get this error :
"Network Modules Not Loaded"
even if all modules required for ftp have been loaded.
CAUSE
The ftp utility needs two TSRs to be loaded before you execute it:
nmtsr.exe, sockets.exe. Run Nmtsr.exe and Sockets.exe after you
configure the remoteboot workstation with the TCP/IP protocol
Now, to run ftp you must add this line to Config.sys :
remdevice=c:\<lanroot>\protman\protman.dos /i:c:\<lanroot>
DO NOT insert a space in REMDEVICE. This line generates the error
"Unrecognized command in config.sys," but allows ftp to function.
You can also use the Config.sys COMMENT command to allow ftp to
function without generating an error in Config.sys. Add this entry:
COMMENT !
! c:\<lanroot>\protman\protman.dos /i:c:\<lanroot>
| Modification Type: |
Major |
Last Reviewed: |
7/30/2001 |
| Keywords: |
KB99143 |
|