Procedure for Upgrading LMSFM on a Headless 3Server (99099)

MORE INFORMATION

• The "LAN Manager Services for Macintosh Installation for 3Servers" disk that came with your LAN Manager for 3Servers tape.
• The "LAN Manager Services for Macintosh 1.0a Setup" disk.

1. At the workstation that you use for remotely administering your 3Server, make a remote drive connection to the ADMIN$ share on your 3Server. For example:

   net use x: \\3server\admin$

2. Copy the files LANMAN.INI and PROTOCOL.INI from drive X to a safe backup location. For example:

   copy x:\lanman.ini c:\temp\lanman.bak
   copy x:\protocol.ini c:\temp\protocol.bak

3. Make a command line Remote Administration connection to the 3Server. For example:

   net admin \\3server /c

4. At the Remote Administration prompt, stop the MACFILE and MACPRINT services on the 3Server. For example:

   net stop macfile
   net stop macprint

5. Exit the Remote Administration prompt as follows:

   exit

6. Change to drive X and execute the REMSETUP program.

   x:
   remsetup

7. From the Connectivity menu, choose "Macintosh Services."
8. When the Macintosh Services dialog is displayed, choose Remove. Choose Yes in response to all the prompts, until removal is complete.
9. When removal is complete, from the Connectivity menu, choose Install.
10. Insert the "LAN Manager Services for Macintosh Installation for 3Servers" disk in your workstation when prompted.
11. When prompted for the Mac Setup disk, insert the LAN Manager 1.0a upgrade disk into your workstation.
12. Installation will run. When prompted, select and configure the appropriate network cards to which LMSFM is to be bound.
13. When installation is complete, from the LAN Manager menu, choose Exit Setup.
14. Copy the backup versions of LANMAN.INI and PROTOCOL.INI that you created in step 2 back to drive X. For example:

    copy c:\temp\lanman.bak x:\lanman.ini
    copy c:\temp\protocol.bak x:\protocol.ini

15. Shutdown and reboot the 3Server.