/N Switch Turns off Verification Search for Protocol (97874)
This article was previously published under Q97874
SUMMARY
Minses provides the interface between LAN Manager for MS-DOS and
NetBIOS. Before it loads, minses normally verifies that there is a
protocol driver at Int 5c. Demand protocol architecture protocols such
as NetBEUI are loaded after the workstation (including Minses) starts,
so the verification fails and Minses refuses to load. The /n switch
(which should be turned on by the LAN Manager Setup program) turns the
minses verification search off.
The /q parameter disables the Minses beep.
| Modification Type: |
Major |
Last Reviewed: |
7/30/2001 |
| Keywords: |
KB97874 |
|