Windows NT Does Not Detect SCSI Drive ID 6 (96270)


The information in this article applies to:

  • Microsoft Windows NT Server 3.1
  • Microsoft Windows NT Workstation 3.1
This article was previously published under Q96270

SUMMARY

Most SCSI hard disk drives are set to ID 6 by default. Windows NT checks for ID 1 first and then ID 0. If Windows NT cannot detect your SCSI drive, set your SCSI drive ID to 1, 0 (preferably), or any other ID but the one the SCSI controller is using.
Modification Type:MajorLast Reviewed:10/30/2003
Keywords:kbHardware KB96270
©2003 Microsoft Corporation. All rights reserved.