WFWG: List of NCB Return Codes and Comments (96079)



The information in this article applies to:

  • Microsoft Windows for Workgroups 3.1

This article was previously published under Q96079

SUMMARY

The following table lists all the possible network control block (NCB) return codes and comments used in Windows for Workgroups.

MORE INFORMATION

   NRC_GOODRET     0x00   good return
   NRC_BUFLEN      0x01   illegal buffer length
   NRC_BFULL       0x02   buffers full, no receive issued
   NRC_ILLCMD      0x03   illegal command
   NRC_CMDTMO      0x05   command timed out
   NRC_INCOMP      0x06   message incomplete, issue another command
   NRC_BADDR       0x07   illegal buffer address
   NRC_SNUMOUT     0x08   session number out of range
   NRC_NORES       0x09   no resource available
   NRC_SCLOSED     0x0a   session closed
   NRC_CMDCAN      0x0b   command canceled
   NRC_DMAFAIL     0x0c   PC DMA failed
   NRC_DUPNAME     0x0d   duplicate name
   NRC_NAMTFUL     0x0e   name table full
   NRC_ACTSES      0x0f   no deletions, name has active sessions
   NRC_INVALID     0x10   name not found or no valid name
   NRC_LOCTFUL     0x11   local session table full
   NRC_REMTFUL     0x12   remote session table full
   NRC_ILLNN       0x13   illegal name number
   NRC_NOCALL      0x14   no callname
   NRC_NOWILD      0x15   cannot put * in NCB_NAME
   NRC_INUSE       0x16   name in use on remote adapter
   NRC_NAMERR      0x17   called name cannot == name or name #
   NRC_SABORT      0x18   session ended abnormally
   NRC_NAMCONF     0x19   name conflict detected
   NRC_IFBUSY      0x21   interface busy, IRET before retrying
   NRC_TOOMANY     0x22   too many commands outstanding, retry later
   NRC_BRIDGE      0x23   ncb_bridge field not 00 or 01
   NRC_CANOCCR     0x24   command completed while cancel occurring
   NRC_RESNAME     0x25   reserved name specified
   NRC_CANCEL      0x26   command not valid to cancel
   NRC_MULT        0x33   multiple requests for same session
   NRC_MAXAPPS     0x36   max number of applications exceeded
   NRC_NORESOURCES 0x38   requested resources are not available
   NRC_SYSTEM      0x40   system error
   NRC_ROM         0x41   ROM checksum failure
   NRC_RAM         0x42   RAM test failure
   NRC_DLF         0x43   digital loopback failure
   NRC_ALF         0x44   analog loopback failure
   NRC_IFAIL       0x45   interface failure
   NRC_ADPTMALFN   0x50   network adapter malfunction
   NRC_PENDING     0xff   asynchronous command is not yet finished
				

Modification Type:MajorLast Reviewed:9/26/1999
Keywords:KB96079