WFWG: Cannot See Workstations When Using Tiara NIC (95993)


The information in this article applies to:

  • Microsoft Windows for Workgroups 3.1
This article was previously published under Q95993

SUMMARY

According to Tiara technical support, the TNDIS driver has not been tested with any of the Lancard E/16PC TP (lattice net based) network interface cards (NICs).

The Lancard E/16PC TP has a PWA number on the card. If the last six digits are in the range 000000 to 000004, it is a lattice net based card and incompatible with Windows for Workgroups.

If you try to use this card with Windows for Workgroups, you may be unable to see or use other workstations, but no error messages appear.

MORE INFORMATION

For more information, contact Tiara technical support.

The Tiara products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:11/4/1999
Keywords:KB95993
©2002 Microsoft Corporation. All rights reserved.