SMC Microchannel Adapter Works with SMC EtherCard Driver (94889)


The information in this article applies to:

  • Microsoft Windows for Workgroups 3.1
  • Microsoft Windows for Workgroups 3.11
This article was previously published under Q94889
The following article contains information on the use of Windows for Workgroups with third-party products or configurations that have not been tested and are not supported by Microsoft.

If the steps or procedures described in this article do not function properly, contact the manufacturer of the third-party product for more information or use a supported configuration.

SYMPTOMS

When installing the "SMC EtherCard Plus Elite /A" Microchannel card in Windows for Workgroups, the card may not be detected correctly because it is not directly supported.

WORKAROUND

Standard Micro Systems (SMC) technical support has confirmed that when prompted for the card type in Windows for Workgroups Setup, you should select:

"SMC (WD) ETHERCARD PLUS /A (MCA) (WD 8003E/A OR 8003ET/A)"

For additional information, contact SMC technical support.

The SMC and EtherCard products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
Modification Type:MajorLast Reviewed:10/15/2003
Keywords:KB94889
©2003 Microsoft Corporation. All rights reserved.