MS-DOS OEM Setup Doesn't Boot on Tandy 1000TX 286 (94329)
The information in this article applies to:
- Microsoft MS-DOS operating system 6.0
- Microsoft MS-DOS operating system 6.2
- Microsoft MS-DOS operating system 6.21
- Microsoft MS-DOS operating system 6.22
This article was previously published under Q94329 SYMPTOMS
Some Tandy 1000TX 286 computers have a 3.5-inch floppy disk drive that
can be configured as a 360K drive. If the drive has been reconfigured,
the MS-DOS 6.x OEM 720K Disk 1 will not start (boot) the computer.
WORKAROUND
To work around this problem:
- Modify or create the CONFIG.SYS file on Disk 1, and add the
following line:
DRIVPARM=/d:0 /f:2 - Boot the system using this disk.
Setup should now run normally.
Modification Type: | Major | Last Reviewed: | 11/22/1999 |
---|
Keywords: | KB94329 |
---|
|