MORE INFORMATION
The following file is available for download from the Microsoft Download Center:
For additional information about how to download Microsoft Support files, click the following article number to view the article in the Microsoft Knowledge Base:
119591 How to Obtain Microsoft Support Files from Online Services
Microsoft scanned this file for viruses. Microsoft used the most current virus-detection software that was available on the date that the file was posted. The file is stored on security-enhanced servers that help to prevent any unauthorized changes to the file.
For DIBs, the 16 and 32-bit formats contain three DWORD masks in the
bmiColors member of the
BITMAPINFO structure. These masks specify which bits in the pel correspond to which color.
The three masks must have contiguous bits, and their order is assumed to be
R, G, B (high bits to low bits). The order of the three masks in the color
table must also be first red, then green, then blue (RGB). In this manner,
the programmer can specify a mask indicating how many shades of each RGB
color will be available for bitmaps created with
CreateDIBitmap(). For 16-bits-per-pixel DIBs,
CreateDIBitmap() defaults to the RGB555 format. For 32-bits-per-pixel DIBs,
CreateDIBitmap() defaults to an RGB888 format.
NOTE: The DIB engine in Windows 95 supports only RGB555 and RGB565 for 16-bit DIBs and only RGB888 for 32-bit DIBs.
Example
The RGB555 format masks would look like the following example:
0x00007C00 red (0000 0000 0000 0000 0111 1100 0000 0000)
0x000003E0 green (0000 0000 0000 0000 0000 0011 1110 0000)
0x0000001F blue (0000 0000 0000 0000 0000 0000 0001 1111)
NOTE: For 16 bits-per-pel, the upper half of the DWORDs are always zeroed.
The RGB888 format masks would look like the following example:
0x00FF0000 red (0000 0000 1111 1111 0000 0000 0000 0000)
0x0000FF00 green (0000 0000 0000 0000 1111 1111 0000 0000)
0x000000FF blue (0000 0000 0000 0000 0000 0000 1111 1111)
Usage
When using 16 and 32-bit formats, there are also certain fields of the
BITMAPINFOHEADER structure that must be set to the correct values:
- The biCompression member must be set to either BI_RGB or BI_BITFIELDS. Using BI-RGB indicates that no bit masks are included in the color table and that the default (RGB555 for 16bpp and RGB888 for 32bpp) format is implied. Using BI_BITFIELDS indicates that there are masks (bit fields) specified in the color table.
- As with 24-bits-per-pixel formats, the biClrUsed member specifies the size of the color table used to optimize performance of Windows color palettes. If the biCompression is set to BI_BITFIELDS, then the optimal color palette starts immediately following the three DWORD masks. Note that an optimal color palette is optional and many applications will ignore it.
Windows 95
In Windows 95, if the BI_BITFIELDS flag is set, then a color mask must be
specified and it must be one of the following:
Resolution Bits Per Color Color Mask
-------------------------------------------------------------
16bpp 5,5,5 0x00007c00 0x000003e0 0x0000001f
16bpp 5,6,5 0x0000f800 0x000007e0 0x0000001f
32bpp 8,8,8 0x00ff0000 0x0000ff00 0x000000ff
User-defined color masks are not available under Windows 95.