MORE INFORMATION
This procedure requires two 1.44 MB disks to set up. The first disk is the
bootable OS/2 disk and contains all necessary operating system files and
LAN Manager drivers. The second disk contains all necessary LAN Manager
files for starting the redirector.
Below are the listings of the files and directories required for the first
and second disks. The disk loads the drivers for a DEC DEPCA network card
and loads the UBXNS protocol. If you want a different card and protocol,
substitute the appropriate files and directories required for the card to
be used in the LANMAN\DRIVERS subdirectory and modify CONFIG.SYS
accordingly. The HPFS Recovery disk was used as a model for the bootable
DISK1.
The easiest way to build the boot disk (DISK1) is to DISKCOPY the HPFS
recovery disk and modify the CONFIG.SYS, LANMAN.INI, and PROTOCOL.INI files
as shown below. The easiest way to make the second disk (DISK2) is to use
an existing LAN Manager OS/2 workstation and set up the configuration
you want with the SETUP program and copy the required files to the second
disk as shown below.
Once the disks are built, boot from DISK1. When booting is complete, insert
DISK2 and type the following command:
to start the redirector. This gives you access to the network. The volume
in drive A is DISK1.
Directory of A:\
LANMAN <DIR> 08-20-92 1:46p
OS2KRNL 293530 11-15-91 12:00a
OS2LDR 18432 11-14-91 12:00p
HPFS 386 260608 11-15-91 12:00a
ABIOS BID 15053 11-15-91 12:00a
DELL001 BID 5904 11-15-91 12:00a
ESDI-506 BID 10946 11-15-91 12:00a
KEYBOARD DCP 5177 11-15-91 12:00a
VTBL850 DCP 10478 11-15-91 12:00a
ANSICALL DLL 3349 11-15-91 12:00a
BKSCALLS DLL 6509 11-15-91 12:00a
BVHINIT DLL 8116 11-15-91 12:00a
BVSCALLS DLL 21697 11-15-91 12:00a
DOSCALL1 DLL 12943 11-15-91 12:00a
KBDCALLS DLL 7721 11-15-91 12:00a
MOUCALLS DLL 4844 11-15-91 12:00a
MSG DLL 5244 11-15-91 12:00a
NLS DLL 4023 11-15-91 12:00a
QUECALLS DLL 9626 11-15-91 12:00a
SESMGR DLL 24052 11-15-91 12:00a
VIOCALLS DLL 16087 11-15-91 12:00a
CMD EXE 88160 11-15-91 12:00a
HPFS386 IFS 35354 11-15-91 12:00a
OSO001 MSG 108095 11-15-91 12:00a
CONFIG OLD 327 11-15-91 12:00a
SYSLEVEL OS2 169 11-15-91 12:00a
DISK0 SCD 1082 11-15-91 12:00a
ABIOS SYS 11 11-15-91 12:00a
BASEDD01 SYS 35274 11-15-91 12:00a
CONFIG SYS 841 08-20-92 4:17p
COUNTRY SYS 24466 11-15-91 12:00a
FLOPPY01 SYS 18036 11-14-91 12:00p
IOCFG01 SYS 4607 11-15-91 12:00a
IORUN SYS 1359 11-15-91 12:00a
IOS1X SYS 15289 11-15-91 12:00a
DISK TSD 9066 11-15-91 12:00a
38 file(s) 1088015 bytes
Directory of A:\LANMAN
. <DIR> 08-20-92 1:46p
.. <DIR> 08-20-92 1:46p
DRIVERS <DIR> 08-20-92 1:46p
NETPROG <DIR> 08-20-92 2:06p
NETLIB 3111 11-15-91 12:00a
LANMAN INI 1870 08-20-92 4:57p
PROTOCOL INI 908 08-20-92 3:35p
7 file(s) 5889 bytes
Directory of A:\LANMAN\DRIVERS
. <DIR> 08-20-92 1:46p
.. <DIR> 08-20-92 1:46p
ETHERNET <DIR> 08-20-92 2:03p
PROTMAN <DIR> 08-20-92 1:47p
PROTOCOL <DIR> 08-20-92 2:04p
5 file(s) 0 bytes
Directory of A:\LANMAN\DRIVERS\ETHERNET
. <DIR> 08-20-92 2:03p
.. <DIR> 08-20-92 2:03p
DEC <DIR> 08-20-92 2:03p
3 file(s) 0 bytes
Directory of A:\LANMAN\DRIVERS\ETHERNET\DEC
. <DIR> 08-20-92 2:03p
.. <DIR> 08-20-92 2:03p
DEPCA OS2 15924 01-21-91 2:25p
3 file(s) 15924 bytes
Directory of A:\LANMAN\DRIVERS\PROTMAN
. <DIR> 08-20-92 1:47p
.. <DIR> 08-20-92 1:47p
PROTOCOL INI 36 11-15-91 12:00a
PROTMAN OS2 17974 11-15-91 12:00a
4 file(s) 18010 bytes
Directory of A:\LANMAN\DRIVERS\PROTOCOL
. <DIR> 08-20-92 2:04p
.. <DIR> 08-20-92 2:04p
NETBEUI <DIR> 08-20-92 2:05p
UBXNS <DIR> 08-20-92 2:05p
4 file(s) 0 bytes
Directory of A:\LANMAN\DRIVERS\PROTOCOL\NETBEUI
. <DIR> 08-20-92 2:05p
.. <DIR> 08-20-92 2:05p
2 file(s) 0 bytes
Directory of A:\LANMAN\DRIVERS\PROTOCOL\UBXNS
. <DIR> 08-20-92 2:05p
.. <DIR> 08-20-92 2:05p
1A LC 2832 03-03-89 10:56a
UBLOOP OS2 8346 09-26-91 4:24p
UBXPS OS2 60900 05-16-91 4:42p
5 file(s) 72078 bytes
Directory of A:\LANMAN\NETPROG
. <DIR> 08-20-92 2:06p
.. <DIR> 08-20-92 2:06p
NETBIOS OS2 10058 11-15-91 12:00a
NETWKSTA SYS 169088 11-15-91 12:00a
RDRHELP SYS 8257 11-15-91 12:00a
5 file(s) 187403 bytes
Total files listed:
76 file(s) 1387319 bytes
52736 bytes free
Note: You must have the appropriate .BID files loaded for this disk to
boot.
You must have the PROTOCOL.INI and LANMAN.INI files on this disk for the
drivers to load (in the above listing, the NETBUI directory is since the
NETBUI protocol is not loaded).
Below is the directory listing of the files required for the second disk:
Volume in drive A is DISK2
Directory of A:\
LANMAN <DIR> 08-20-92 5:51p
OSO001 MSG 108095 11-14-91 12:00p
3 file(s) 111167 bytes
Directory of A:\LANMAN
. <DIR> 08-20-92 5:51p
.. <DIR> 08-20-92 5:51p
NETLIB <DIR> 08-20-92 5:51p
NETPROG <DIR> 08-20-92 5:51p
SERVICES <DIR> 08-20-92 5:51p
LANMAN INI 1851 08-20-92 6:09p
LMUSER INI 28 07-13-92 1:09p
PROTOCOL INI 908 08-20-92 3:35p
8 file(s) 4562 bytes
Directory of A:\LANMAN\NETLIB
. <DIR> 08-20-92 5:51p
.. <DIR> 08-20-92 5:51p
NETAPI DLL 340532 11-15-91 12:00a
NETSPOOL DLL 7162 11-15-91 12:00a
4 file(s) 347694 bytes
Directory of A:\LANMAN\NETPROG
. <DIR> 08-20-92 5:51p
.. <DIR> 08-20-92 5:51p
NET EXE 146000 11-15-91 12:00a
NET MSG 113569 11-15-91 12:00a
4 file(s) 259569 bytes
Directory of A:\LANMAN\SERVICES
. <DIR> 08-20-92 5:51p
.. <DIR> 08-20-92 5:51p
WKSTA EXE 36788 11-15-91 12:00a
WKSTAHLP EXE 8297 11-15-91 12:00a
4 file(s) 45085 bytes
Below is the CONFIG.SYS file on the boot disk:
IFS=HPFS386.IFS /C:256 A:\HPFS.386
PROTSHELL=CMD.EXE
LIBPATH=a:\lanman\netlib;a:\lanman\drivers\protocol;\;
SET PATH=a:\lanman\netprog;\;\
SET DPATH=a:\lanman\netprog;\;
SET PROMPT=$i[$p]
BUFFERS=12
MEMMAN=NOSWAP,MOVE
PROTECTONLY=YES
DEVINFO=KBD,US,KEYBOARD.DCP
DEVINFO=SCR,EGA,VTBL850.DCP
REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES ===
LANMAN 2.1 ===
DEVICE=a:\LANMAN\DRIVERS\PROTMAN\PROTMAN.OS2 /i:A:\LANMAN
DEVICE=a:\LANMAN\Drivers\Ethernet\DEC\DEPCA.OS2
DEVICE=a:\LANMAN\Drivers\Protocol\UBXNS\UBXPS.OS2
DEVICE=a:\LANMAN\Drivers\Protocol\UBXNS\UBLoop.OS2
DEVICE=a:\LANMAN\NETPROG\RDRHELP.SYS
IFS=a:\LANMAN\NETPROG\NETWKSTA.SYS /i:A:\LANMAN
REM ====== LANMAN 2.1 === DO NOT MODIFY BETWEEN THESE LINES ===
LANMAN 2.1
Below are examples of the LANMAN.INI and the PROTOCOL.INI files on the
disks. Note that the LANMAN.INI and PROTOCOL.INI files are required on
both disks.
LANMAN.INI
;*****************************************************************;
;** Microsoft LAN Manager **;
;** Copyright(c) Microsoft Corp., 1991 **;
;*****************************************************************;
; LAN Manager initialization file, for server configuration.
[networks]
; This info is read by redir at device init time. It is available to
; apps via NetBiosEnum.
net1 = XNS$0,0
[workstation]
computername = floppyws
domain = bcvdomain
othdomains = lc3com
wrkheuristics = xx0xxxxxxx0xxxxxxxxxxxxxxxxxxxxx0xx
wrkservices =
wrknets = net1
[messenger]
[netshell]
refresh = 15
remote =
username =
autorestore = NO
saveconnections = NO
[version]
lan_manager = 2.1.0
[server]
[alerter]
[netrun]
runpath =
[replicator]
logon = user
password =
replicate = import
tryuser = yes
[ups]
batterytime = 60
recharge = 100
signals = 100
voltlevels = 100
cmdfile =
[netlogon]
[remoteboot]
[remoteaccess]
[services]
; Correlates name of service to pathname of service program.
; The pathname must be either:
; 1) an absolute path (including the drive specification)
; OR
; 2) a path relative to the LanMan root
workstation = services\wksta.exe
server = services\netsvini.exe
messenger = services\msrvinit.exe
netpopup = services\netpopup.exe
alerter = services\alerter.exe
netrun = services\runservr.exe
replicator = services\replicat.exe
ups = services\ups.exe
netlogon = services\netlogon.exe
remoteboot = services\rplservr.exe
timesource = services\timesrc.exe
remoteaccess = services\raserver.exe
If any workstation services are to be loaded by means of the wrkservices
entry, the executable file must be located in the LANMAN\SERVICES
subdirectory.
PROTOCOL.INI:
[PROTMAN]
DRIVERNAME = PROTMAN$
[UBLOOP]
BINDINGS = "DE16DNA_NIF"
DriverName = UBLoop$
[UBXNS]
DriverName = XNS$0
Bindings = "UBLoop"
LCFile = a:\LANMAN\Drivers\Protocol\UBXNS\1A.LC
VCReceiveLarge = 40
VCSends = 400
VCs = 115
RcvWindow = 8
SendWindow = 8
[UBLOOP]
BINDINGS = "DE16DNA_NIF"
DriverName = UBLoop$
[UBXNS]
DriverName = XNS$0
Bindings = "UBLoop"
LCFile = a:\LANMAN\Drivers\Protocol\UBXNS\1A.LC
VCReceiveLarge = 40
VCSends = 400
VCs = 115
RcvWindow = 8
SendWindow = 8
[UBNXDS1A_XIF]
[UBLOOP]
BINDINGS = "DE16DNA_NIF"
DriverName = UBLoop$
[UBXNS]
DriverName = XNS$0
Bindings = "UBLoop"
LCFile = a:\LANMAN\Drivers\Protocol\UBXNS\1A.LC
VCReceiveLarge = 40
VCs = 115
RcvWindow = 8
SendWindow = 8
[DE16DNA_NIF]
DriverName = DEPCA$