Transmission Retry Field Displays 100 Instead of 1000 (91048)
The information in this article applies to:
- Microsoft Windows 3.1
- Microsoft Windows 3.11
- Microsoft Windows for Workgroups 3.1
This article was previously published under Q91048 SYMPTOMS
If you set the Transmission Retry field in the Connect dialog box to 996,
997, 998, or 999 and choose the OK button, the setting is rounded to 1000.
Because the Transmission Retry field is limited to three digits, the number
100 is displayed. (To set the Transmission Retry field, choose the Printer
icon from the Control Panel window, select your printer, and choose the
Connect button.)
To view the last zero in the number 1000, you must highlight the entire
Transmission Retry field with the mouse. The actual value (that is, 1000)
is set for the printer driver in the [windows] section of the WIN.INI file.
STATUS
Microsoft is researching this problem and will post new information
here as it becomes available.
Modification Type: | Major | Last Reviewed: | 11/14/2003 |
---|
Keywords: | KB91048 |
---|
|