Cannot Redirect LPT4 or Greater with Basic Redirector, Novell (90391)
The information in this article applies to:
- Microsoft Windows for Workgroups 3.1
This article was previously published under Q90391 SYMPTOMS
If the NetBEUI and Novell NetWare protocols are loaded, and you run
the basic redirector, you get the following error if you attempt to
redirect any port greater than LPT3.
Error 11: An attempt was made to load a program
with an incorrect format.
When the full redirector is running, you can redirect up to LPT9.
WORKAROUND
To work around this problem on a 386 machine or above, unload the
basic redirector and load the full redirector.
There is no workaround to this problem on a 286 machine. You must use
LPT1, LPT2, or LPT3.
The NetWare product included here is manufactured by Novell, a
vendor independent of Microsoft; we make no warranty, implied or
otherwise, regarding this product's performance or reliability.
KBCategory: kbnetwork kb3rdparty kbprb
KBSubcategory: wfw wfwg
| Modification Type: | Major | Last Reviewed: | 10/7/1999 |
|---|
| Keywords: | KB90391 |
|---|
|