Works: Printing Envelopes on an Epson LQ-570 (90113)

SUMMARY

To print envelopes correctly on a dot-matrix printer, you must use the proper settings in both the Printer Setup dialog box and the Page Setup & Margins dialog box. Also, you must position of the envelope correctly in the printer. Use the settings below to print standard business envelopes on the Epson LQ-570 printer.

MORE INFORMATION

Page Setup and Margins

   Setting    Value   Notes
   ------------------------------------------

   Top        5"       With return address
              7"       Without return address
   Bottom     0"
   Left       0"       With return address
              5"       Without return address
   Right      0"
   Header     0"
   Footer     0"
   Length     8.5"
   Width      11"

Printer Setup

   Paper Size        Mode
   ---------------------------

   8.5-by-11-inch    Landscape

When you print standard business envelopes, use the following guidelines:

If you are printing without a return address, type the mailing address in the upper-left corner of the document.
If a return address is included, type the return address in the upper-left corner of the document. Enter seven to nine blank lines from the return address to the mailing address. Set a tab at 5 inches and insert a tab at the beginning of each address line of the mailing address.
Feed the envelope into the left side of the manual-feed slot with the flap down and to the right. The envelope must start with the top (as it is fed in) aligned with the print head.