The COM port number does not appear when you install a Bluetooth handheld device in Windows XP (885365)
The information in this article applies to:
- Microsoft Windows XP Home Edition
- Microsoft Windows XP Professional
SYMPTOMS
When you use the Add Bluetooth Device Wizard to install a Bluetooth handheld device, the communications (COM) port number does not appear on the Finish page of the wizard. Because your handheld device requires an incoming COM port, you cannot complete the installation of the handheld device.CAUSE
This problem may occur if the handheld device does not advertise that it has a COM port.WORKAROUND
To work around this problem, follow these steps:
- Turn on the handheld device.
- On your computer, click Start, click Run, type bthprops.cpl, and then click OK.
- Click the Com Ports tab, and then click Add.
- Click Incoming (device initiates the connection), and then click OK.
- Write down the COM port numbers that are listed.
- On your computer, install the software that came with your handheld device, including the HotSync software. When you are prompted to choose a COM port, use one of the COM ports that you wrote down in step 5. If the port does not work, use another port.
STATUSMicrosoft has confirmed that this is a problem in the Microsoft products that are listed in the "Applies to" section.
| Modification Type: | Major | Last Reviewed: | 9/10/2004 |
|---|
| Keywords: | kbtshoot KB885365 kbAudEndUser |
|---|
|