Using Sigma Video Cards and Displays Windows 3.0 and 3.1 (88776)



The information in this article applies to:

  • Microsoft Windows 3.0
  • Microsoft Windows 3.0a
  • Microsoft Windows 3.1
  • Microsoft Windows 3.11

This article was previously published under Q88776

SUMMARY

Sigma has a product line of matched video cards and monitors for desktop publishing and computer assisted design (CAD). Sigma has written drivers for Windows 3.0, 3.0a, and 3.1.

The latest video drivers are available directly from Sigma technical support. Contact Sigma for more information.

This article discusses the following:

  • Sigma Models and Specific Model Issues
  • Driver Installation

MORE INFORMATION

Sigma Models and Specific Model Issues

LaserView Monochrome or LaserView Classic

This monitor supports 1600 x 1200 pixel resolution. The Windows 3.1 drivers for this card may display the Windows 3.0 logo when Windows is started. If this is a problem, contact Sigma for updated drivers that correct this problem.

This card uses two upper memory areas (UMA) B000-BFFF and D000-DFFF. The base I/O address for this card is located at 249 hexadecimal. PageView and SilverView Monochrome, and VGA Legend

Microsoft has no information about PageView Monochrome and SilverView Monochrome having any problems with Windows. However, when running Windows 3.1 in enhanced mode with the VGA Legend, black and white rectangles may appear on the screen. (Alternative symptoms are brown and tan colored bands obscuring all Windows features.)

To resolve this problem, insert the following line in the [386enh] section of the SYSTEM.INI:

sysvmin2ndbank=false

Sigma/H

This is an earlier Sigma EGA or VGA card, which is not compatible with Windows. Contact Sigma and have your card upgraded to the Sigma Legend.

NOTE: Many Sigma cards come in both Micro channel (MCA) and ISA bus interfaces. If you are using the MCA version of the card, make sure you are using the PS/2 drivers, instead of the Windows 3.0 drivers.

Driver Installation

  1. Exit Windows, and change your directory to C:\WINDOWS.
  2. Type setup and press ENTER.
  3. From the hardware options screen, choose Display.
  4. Choose Other, and insert the Sigma driver disk.
The Sigma Designs products included here are manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.

Modification Type:MinorLast Reviewed:7/7/2005
Keywords:KB88776