About Cache Manager in Windows Server 2003 (837331)

MORE INFORMATION

The Microsoft Windows Server 2003 uses the following types of file system data caching:

• Logical block caching
  This caches disk sector data in memory.
• Virtual block caching
  This caches data at the file system level instead of at the disk level.

Virtual cache size

IA-32 architecture limits the size of virtual address space to 32 bits. If your computer is configured with the /3 GB switch, 3 gigabytes (GB) of virtual address space is reserved for user mode operation, and only 1 GB is available for kernel mode operation. The virtual cache size depends on the following factors:

• The physical memory in your computer.
• The value of the LargeSystemCache entry in the following registry subkey:

  KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\MemoryManagement

  Set this value to 1 to enable this entry.
• The setting of the PagedPoolSize registry subkey during initialization.
• The use of the /3 GB switch.
• The boot image size.
• The session space size that is required for Terminal Server configuration.

The following table indicates how to calculate the virtual cache size:

Architecture	Virtual cache size
IA-32	128 megabytes (MB) + (Physical memory - 16 MB) / 4 MB x 64 MB
IA-64	128 MB + (Physical memory - 16 MB) / 8 MB x 64 MB

The following table indicates the maximum and the minimum limits for the virtual cache size calculation:

Architecture	Minimum virtual cache size	Maximum virtual cache size
IA-32 (LargeCacheSize value = 0)	Not available	512 MB
IA-32 (LargeCacheSize value = 1)	Not available	960 MB
IA-64	128 MB	1 terabyte

Note The /3GB switch reduces the size of virtual cache space by approximately 10 MB.

Physical cache size

There is no limit to the physical cache size in the IA-32 and IA-64 architectures. Windows allocates physical cache memory based on the following factors:

• Virtual cache data
• Cached file input/output
• The other demands that the system makes on physical memory

The physical memory that supports virtual cache data can be flushed and used for other purposes, depending on system requirements. Windows confirms that the cached data is flushed to the disk before Windows retrieves the physical memory for other purposes. As the demand for virtual cache data increases, more physical memory is allocated for virtual cache data.

Cache flush frequency

If the Cache Manager does not try to write modified file data back to a file, and free memory becomes scarce, the memory manager's modified writer thread writes the unwritten data back to a file. The system does not rely on the memory manager to flush file data back to the disk. Instead, the Cache Manager tries to write the data back to nonvolatile storage in a timely manner by using the "lazy writing" process. As programs modify file data, the Cache Manager keeps track of how much data is modified, or "dirty." The Cache Manager writes back one-eighth of the cache's modified data to disk every second.
For more information about Cache Manager in Windows Server 2003, visit the following Windows & .NET Magazine Network Web site: